Skip to main content
MCP server CX Codex

container-loading — Claude Code MCP server: 3D load plans

container-loading builds a 3D load plan for a container or truck and checks it against VGM, IMDG segregation, axle loads and centre of gravity. For shipments that need paperwork, not just stacking.

no license 467 installs updated 2026-07-02

Install into Claude Code · Platform CLI: remote server All methods and platforms ↓
claude mcp add --transport http container-loading https://container-loading--lxxmng.run.tools
Open on GitHub

What container-loading does

The server packs cargo into a container or trailer in three dimensions, then tests the result against real rules: VGM, dangerous-goods segregation from IMDG 7.2.4 across 17 classes, axle loads under the US Bridge Formula, EU 96/53/EC, US 23 CFR 658.17 and CN GB 1589-2016, plus carton crush, centre of gravity and a securing checklist built on FMCSA and EN 12195.

Four tools do the work. list_equipment returns container, truck, ULD and pallet types with internal dimensions in mm and max payload. suggest_containers turns a volume and weight figure into a rough container count. plan_load produces the dimension-aware plan with utilisation, centre of gravity and crush violations. export_plan writes it out as a work order: numbered stuffing sequence, bracing actions, and the figures you declare.

Treat suggest_containers as a first estimate only. Geometry, weight distribution and securing come from plan_load, and cargo type changes how things nest there, so drums and pipes are not stacked like sacks. There is a demo key, lmcp_demo_public, and a free planner at loadingmcp.com with no signup.

What it helps with

  • Estimate how many containers a shipment will take
  • Check trailer axle loads before the truck leaves
  • Separate dangerous goods the way IMDG requires
  • Hand the warehouse a numbered stuffing sequence
  • Check whether the bottom cartons hold up

Example prompts for the agent

  • Suggest how many containers my cargo needs from its volume and weight
  • Build a load plan for this container and show the centre of gravity
  • Export the plan as a work order with the stuffing order and bracing

How to install container-loading

Platform CLI: remote server

claude mcp add --transport http container-loading https://container-loading--lxxmng.run.tools

Step by step, with commands for each platform: How to add an MCP server to Claude Code, Codex, Cursor, VS Code, Gemini CLI and more

Questions about container-loading

How do I install container-loading in Claude Code?

Run claude mcp add --transport http container-loading https://container-loading--lxxmng.run.tools. That one command registers the HTTP endpoint.

What does container-loading do?

It computes a 3D load plan for a container or truck and runs compliance checks: VGM, IMDG segregation, axle loads, centre of gravity and securing.

How is plan_load different from suggest_containers?

suggest_containers gives a volume-and-weight estimate of container count. plan_load does the exact dimension-aware plan with utilisation, centre of gravity and crush checks.

Similar MCP servers

All MCP servers for Agent setup: memory, context, orchestration →

Project sponsors

Companies that keep this analytics open