Skip to main content
skill CX Codex

setup · microsoft, power-automate — Claude Code skill for Power Automate CLI setup

setup is a Claude Code skill that prepares Power Automate CLI prerequisites when setup is new or something fails. It checks the required tools and Azure sign-in.

MIT ★ 1,167 updated 2026-10-29

Install into Claude Code · Plugin marketplace All methods and platforms ↓
/plugin marketplace add microsoft/power-platform-skills
/plugin install power-automate@power-platform-skills
Open on GitHub

What setup does

setup checks whether Node.js and Azure CLI are installed, then guides the Azure sign-in process. If a command is missing or Node.js is too old, it gives installation steps for Windows or Mac and checks again afterward.

The skill also tests access to a Power Automate token and accounts for the Azure cloud in use. GCC, GCC High, and DoD may require explicit PA_CLOUD and PA_FLOW_RESOURCE values. It requires Node.js 18 or later, Azure CLI, and an account with Power Automate access. Connection management uses a separate MSAL session, so az login does not switch its account.

What it helps with

  • check whether Node.js and Azure CLI are installed
  • sign in to Azure and test Power Automate access
  • diagnose token errors for an Azure cloud

Example prompts for the agent

  • Set up Power Automate CLI and check which prerequisites are missing.
  • Check my Azure sign-in and Power Automate access.
  • Help diagnose why I can't get a Power Automate token.

How to install setup

1Plugin marketplace

/plugin marketplace add microsoft/power-platform-skills
/plugin install power-automate@power-platform-skills

This installs the whole power-automate plugin with all its skills

2Skills CLI (Vercel)

npx skills add microsoft/power-platform-skills --skill setup -a claude-code

3Manually: put the files in place

~/.claude/skills/setup/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/setup/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about setup

How do I install setup in Claude Code?

Add the marketplace with /plugin marketplace add microsoft/power-platform-skills, then install the skill with /plugin install power-automate@power-platform-skills.

What does setup do?

It checks Node.js and Azure CLI, guides Azure sign-in, and tests Power Automate token access. It also takes the Azure cloud configuration into account.

What does setup need to run?

It requires Node.js 18 or later, Azure CLI, and an account with access to Power Automate.

Source text

SKILL.md · MIT
---
name: setup
description: Set up Power Automate CLI prerequisites. Use when the user is new, something isn't working, or they need help getting started.
user-invocable: true
allowed-tools: Bash, Read, Write, Glob, Grep, AskUserQuestion, mcp__flowagent__list_environments, mcp__flowagent__set_current_env, mcp__flowagent__get_current_env, mcp__flowagent__resolve_environment, mcp__flowagent__list_flows, mcp__flowagent__get_flow, mcp__flowagent__create_flow, mcp__flowagent__update_flow, mcp__flowagent__edit_flow, mcp__flowagent__copy_flow, mcp__flowagent__publish_flow, mcp__flowagent__disable_flow, mcp__flowagent__delete_flow, mcp__flowagent__run_flow, mcp__flowagent__get_run_history, mcp__flowagent__get_run_details, mcp__flowagent__get_run_actions, mcp__flowagent__get_run_action_repetitions, mcp__flowagent__cancel_run, mcp__flowagent__cancel_all_runs, mcp__flowagent__resubmit_run, mcp__flowagent__diagnose_run, mcp__flowagent__list_connections, mcp__flowagent__list_connectors, mcp__flowagent__get_connector, mcp__flowagent__search_operations, mcp__flowagent__get_operation_details, mcp__flowagent__pick_or_create_connection, mcp__flowagent__resolve_refs, mcp__flowagent__resolve_params, mcp__flowagent__scaffold_flow, mcp__flowagent__list_templates, mcp__flowagent__validate_flow, mcp__flowagent__preflight_flow, mcp__flowagent__smoke_test, mcp__flowagent__get_expression_help, mcp__flowagent__list_desktop_flows, mcp__flowagent__list_machine_groups, mcp__flowagent__run_desktop_flow, mcp__flowagent__get_flow_context, mcp__flowagent__set_current_flow, mcp__flowagent__clear_current_flow, mcp__flowagent__invoke_operation, mcp__flowagent__get_past_trigger_inputs, mcp__flowagent__test_connection, mcp__flowagent__fix_connection, mcp__flowagent__delete_connection, mcp__flowagent__preview_update, mcp__flowagent__get_backup, mcp__flowagent__list_backups, mcp__flowagent__restore_backup, mcp__flowagent__list_trigger_emulators, mcp__flowagent__whoami, mcp__flowagent__doctor, mcp__flowagent__reconnect, mcp__flowagent__list_accounts, mcp__flowagent__switch_account
model: opus
---

# First-Time Setup Guide

You are helping a non-technical user get the Power Automate plugin working for the first time. Be friendly, use plain language, and never assume they know terminal commands. Walk them through each step one at a time.

## Step 1: Check Node.js

Run silently:
```bash
node --version 2>&1
```

- **If it works** (prints something like `v18.x.x` or higher): Tell them "Node.js is installed" and move on.
- **If it fails or version is below 18**: Tell them they need Node.js 18 or newer. Ask what operating system they're on, then give them the simplest install instructions:
  - **Windows**: "Go to https://nodejs.org, download the LTS version, and run the installer. Click Next through everything."
  - **Mac**: "Open Terminal and run: `brew install node`" (or direct them to nodejs.org)
  - After they've installed it, re-check with `node --version`.

## Step 2: Check Azure CLI

Run silently:
```bash
az --version 2>&1
```

- **If it works**: Tell them "Azure CLI is installed" and move on.
- **If it fails**: Tell them they need the Azure CLI. Ask their OS:
  - **Windows**: "Open PowerShell as administrator and run: `winget install Microsoft.AzureCLI`" or direct them to https://aka.ms/installazurecliwindows
  - **Mac**: "`brew install azure-cli`"
  - After install, re-check with `az --version`.

## Step 3: Azure Login

Check if they're already logged in:
```bash
az account show --output json 2>&1
```

- **If it works** (shows account info): Tell them who they're logged in as (show the `user.name` field) and ask if that's the right account.
- **If it fails**: Tell them "Let's sign you into Azure." Then run:
  ```bash
  az login
  ```
  This will open their browser. Tell them: "A browser window should open. Sign in with your work account — the one you use for Power Automate."
  After login completes, confirm it worked by running `az account show` again.

**Verify token access** — this catches permission issues early.

First find out which Azure cloud they're on, because the Power Automate
resource URL differs per cloud and the commercial one cannot be assumed
(GCC High / DoD tenants will fail against it):
```bash
az cloud show --query name -o tsv
```

| `az cloud show` | Power Automate resource |
|---|---|
| `AzureCloud` (commercial) | `https://service.flow.microsoft.com` |
| `AzureCloud` + GCC tenant | `https://gov.service.flow.microsoft.us` |
| `AzureUSGovernment` (GCC High) | `https://high.service.flow.microsoft.us` |
| `AzureUSGovernment` (DoD) | Operator-verified `PA_FLOW_RESOURCE` value required; no built-in audience |

`az cloud show` cannot distinguish commercial from GCC, or GCC High from DoD —
for those, set `PA_CLOUD=gcc` / `PA_CLOUD=dod` explicitly.

DoD endpoint hosts use `appsplatform.us`, but that does not establish the token
audience (App ID URI). With `PA_CLOUD=dod`, FlowAgent requires an explicit,
operator-verified `PA_FLOW_RESOURCE` and fails configuration otherwise. Do not
copy a guessed audience from a hostname; obtain the correct value for the tenant.

Then request a token for the matching resource, e.g. for commercial:
```bash
az account get-access-token --resource https://service.flow.microsoft.com --output json 2>&1
```
FlowAgent itself auto-detects the cloud the same way; you can override the
detection with `PA_CLOUD=commercial|gcc|gcchigh|dod`.
- **If it works**: Move on.
- **If it fails with "AADSTS65002"** (common in GCC High): the Azure CLI app isn't
  preauthorized for the Power Automate resource in that cloud. This is not a license
  problem. Register a public-client app with delegated Power Automate (Flow service)
  permissions and set `PA_CLIENT_ID=<app-id>`; flow commands then use that app.
- **If it fails with any other "AADSTS"**: The user's account may not have Power Automate access. Tell them: "Your Azure account doesn't seem to have access to Power Automate. Check with your IT admin that you have a Power Automate license."
- **If it fails with other errors**: Show the error and suggest they contact IT support.
- **If they're on a sovereign cloud and connection-management commands fail**: keep
  the original error and inspect its code. `AADSTS650057` can indicate an invalid
  resource or missing app authorization; `AADSTS65001` can require admin consent.
  An app-not-found or consent failure may require an appropriately authorized
  public-client registration and `PA_CLIENT_ID=<app-id>`. Network, tenant-selection
  and expired-session errors need different remediation. Do not infer missing
  preauthorization from the cloud name or classify every other code as unrelated.

## Signing in to a specific account

Connection management authenticates separately from `az` — it uses its own MSAL
session with its own on-disk token cache, so `az login` / `az account set` do
**not** switch the account it uses.

Three tools cover this:

| Tool | Use it to |
|---|---|
| `list_accounts` | See the cached-account inventory, `effectiveConnectivityIdentity`, and `nextSignIn` settings. Inactive tenant caches do not count as identity mismatches. Acquires no token. |
| `switch_account` | Save a preferred `username`, or omit it to clear the preference. Check `preferencePersisted` and `nextSignIn`: environment overrides still apply. |
| `whoami` / `doctor` | Compare the effective Connectivity username and tenant with Azure CLI, including different users in the same tenant. |

**When a connection tool fails with `ServiceToServiceEnvironmentNotFound`**,
check identity before assuming the environment is missing. `list_accounts`
distinguishes the effective account from historical cached accounts. A different
username or tenant on the effective account indicates a mismatch; an unused
tenant's cache alone does not. `switch_account` clears the cached sign-in and
records the preferred username for reauthentication. It does not prove that
the subsequent sign-in succeeded or that environment permissions are correct.

`switch_account` does not change the Azure CLI identity. `az` is yours to set;
where the two disagree, the tool says so rather than silently re-pointing one.
`reconnect` keeps a recorded preference — it drops credentials, and the
preference is a stated intent rather than a credential.
It waits for pending token acquisition and cache cleanup, then clears in-memory
tokens for all Azure CLI resources as well as Connectivity. A cleanup failure
is an error, not a completed switch: fix the cache access problem and retry.
Do not continue under the assumption that credentials changed when reset failed.

On interactive sign-in FlowAgent forces the account picker by default, so the
browser's currently-signed-in account is never used silently. Two overrides:

| Variable | Effect |
|---|---|
| `PA_LOGIN_HINT=<upn>` | Pre-select that account. Suppresses the picker, since the account is already targeted. |
| `PA_NO_ACCOUNT_PICKER=1` | Restore plain browser SSO. For single-account users who don't want the extra click. |

Precedence, most specific first: `PA_LOGIN_HINT`, then a `switch_account`
preference, then `PA_NO_ACCOUNT_PICKER`, then the picker.
For example, `switch_account` with username B still targets A if
`PA_LOGIN_HINT=A` is set. Omitting the username clears only the stored preference;
it does not override `PA_LOGIN_HINT` or `PA_NO_ACCOUNT_PICKER`. The response
reports the effective settings instead of promising a picker in those cases.

## Step 4: Check the FlowAgent tools are wired

The plugin talks to Power Automate through the **FlowAgent MCP server**, which is
registered as `flowagent` in the plugin's `.mcp.json` and started automatically.
`.mcp.json` loads the bundled `server/mcp.mjs` through a small Node bootstrap
that resolves the plugin's installation directory (`PLUGIN_ROOT`, else
`CLAUDE_PLUGIN_ROOT`, else the current directory) and prints an actionable error
if the bundle can't be found.

- **If `flowagent-*` / `mcp__flowagent__*` tools appear in your tool list**: tell
  them "The Power Automate tools are connected" and move on.
- **If they're missing**: the MCP server isn't registered. Fix it automatically:

  1. **Locate the installed plugin's MCP bundle.** This only matches a bundle
     inside a `power-automate` plugin directory, so it can't pick up another
     plugin's MCP server:
     ```bash
     node -e "const fs=require('fs'),p=require('path'),d=p.join(process.env.HOME||process.env.USERPROFILE,'.copilot','installed-plugins');const find=(dir)=>{let out=[];for(const e of fs.readdirSync(dir,{withFileTypes:true})){const f=p.join(dir,e.name);if(e.isDirectory()){try{out=out.concat(find(f))}catch{}}else if(e.name==='mcp.mjs'&&p.basename(p.dirname(dir))==='power-automate'){out.push(dir)}}return out};try{const hits=find(d);if(hits.length===1)console.log(JSON.stringify({found:true,serverDir:hits[0],mcpMjs:p.join(hits[0],'mcp.mjs')}));else if(hits.length>1)console.log(JSON.stringify({found:false,reason:'multiple power-automate bundles',candidates:hits}));else console.log(JSON.stringify({found:false}))}catch(e){console.log(JSON.stringify({found:false,error:e.message}))}"
     ```
     If it reports `multiple power-automate bundles`, show the candidates and ask
     the user which one to register rather than guessing.

  2. **If exactly one was found**, read `~/.copilot/mcp-config.json`, add the
     `flowagent` MCP entry, and write it back:
     ```bash
     node -e "const fs=require('fs'),p=require('path');const home=process.env.HOME||process.env.USERPROFILE;const cfgPath=p.join(home,'.copilot','mcp-config.json');let cfg;try{cfg=JSON.parse(fs.readFileSync(cfgPath,'utf8'))}catch{cfg={mcpServers:{}}};if(!cfg.mcpServers)cfg.mcpServers={};if(cfg.mcpServers.flowagent){console.log('already registered');process.exit(0)}const d=p.join(home,'.copilot','installed-plugins');const find=(dir)=>{let out=[];for(const e of fs.readdirSync(dir,{withFileTypes:true})){const f=p.join(dir,e.name);if(e.isDirectory()){try{out=out.concat(find(f))}catch{}}else if(e.name==='mcp.mjs'&&p.basename(p.dirname(dir))==='power-automate'){out.push(dir)}}return out};const hits=find(d);if(hits.length!==1){console.log(hits.length?'ambiguous: '+JSON.stringify(hits):'mcp.mjs not found');process.exit(1)}const mcpPath=p.join(hits[0],'mcp.mjs');cfg.mcpServers.flowagent={command:'node',args:[mcpPath]};fs.writeFileSync(cfgPath,JSON.stringify(cfg,null,2)+'\n');console.log('registered flowagent MCP at '+mcpPath)"
     ```

  3. **Tell the user** to restart the agent (Copilot CLI: `/restart`, Claude Code:
     restart the process). After restart, `flowagent-*` tools should appear.

  4. **If not found** (plugin not installed at all): tell them to install the
     plugin first:
     ```
     /plugin marketplace add microsoft/power-platform-skills
     ```
     Then select `power-automate` and run `/setup` again.

## Step 5: Smoke Test

Verify everything works end-to-end by listing the user's environments:

- **Preferred**: call the `list_environments` tool.
- **If MCP tools aren't available**: run `node <path-to-plugin>/server/mcp.mjs`
  to confirm the bundled MCP server starts cleanly, then fix the plugin install
  or `.mcp.json` wiring before retrying.

- **If it returns environments**: Success! Tell them:
  - "Everything is working! Here are your Power Automate environments:"
  - Show the environments in a simple table (name, location).
  - If there are multiple, ask which one they mainly use and suggest setting it
    as the default (the `set_current_env` tool, or ask "set my default
    environment to <name>").
  - Tell them about the available skills:
    - **`/browse-flows`** — Browse your flows
    - **`/create-flow`** — Create a new flow
    - **`/debug-flow`** — Fix a broken flow
- **If it fails**: Check the error. Common issues:
  - Auth error → go back to Step 3
  - Tools not found → go back to Step 4
  - Network error → ask if they're behind a corporate proxy/VPN

## Tone Guidelines

- Use "we" language: "Let's check if Node.js is installed"
- Celebrate small wins: "Great, Node.js is ready!"
- Don't dump all steps at once — do one at a time and confirm before moving on
- If something fails, don't panic — explain what went wrong in plain English and what to do
- Never show raw JSON errors to the user without explaining what they mean

© Microsoft · MIT · microsoft/power-platform-skills

Similar skills

All skills for Automation and no-code: n8n, Zapier, Make →

setup by other authors comes first.

setup official anthropics setup is a Claude Code skill that checks connected tools, learns your writing style from sent email, and builds a starter dashboard without a questionnaire. For first run. CX Codex +1 371installs setup Alireza Rezvani setup sets up an autoresearch experiment by collecting its target file, evaluation command, metric, and optimization direction. Use it before starting an optimization loop. CX Codex +1 1,480installs setup aws This skill kicks off the connection setup for AWS DevOps Agent and AWS Security Agent. Reach for it when MCP tools go missing or you are wiring the toolkit up for the first time. CX Codex +1 1,600installs setup marketcalls setup sets up a Python backtesting environment with VectorBT and OpenAlgo. It configures the virtual environment, installs dependencies, and prepares .env. CX Codex +1 2,100installs setup assistant-ui setup is a Claude Code skill that installs and configures assistant-ui through its CLI. It covers new projects, existing Next.js apps, and package updates. CX Codex +1 6,400installs azure-logic-apps-power-automate official github azure-logic-apps-power-automate — a GitHub Copilot rule that guides JSON workflow definitions for Azure Logic Apps and Power Automate: triggers, actions, error handling. CX Codex +1 ★ 41,430repo stars power-platform-architect official Tim Hanewich power-platform-architect is a GitHub Copilot skill that turns business requirements and meeting transcripts into Power Platform solution architecture. It selects components and creates Mermaid.js diagrams. CX Codex +1 205installs physical-ai-infrastructure-setup-and-resilient-scaling official NVIDIA Physical AI physical-ai-infrastructure-setup-and-resilient-scaling is a skill for setting up NVIDIA Physical AI for synthetic data generation on MicroK8s or Azure AKS, including OSMO deployment and infrastructure recovery. CX Codex GP ChatGPT +1 ★ 8,052repo stars airunway-aks-setup Microsoft airunway-aks-setup guides AI Runway setup on an existing AKS cluster, from node checks to the first model deployment. It covers GPU inference and provider setup. CX Codex +1 ★ 3,232repo stars mcp-power-automate kaael1 Lets an agent read, validate, edit and revert Power Automate cloud flows, using the Chromium session you are already signed into. CX Codex +1 ★ 30repo stars cx-observability-setup coralogix cx-observability-setup configures the Coralogix observability stack via the CLI: sets up saved views, notification connectors, alert routing, and webhooks for new services. CX Codex +1 4,500installs

From the same set157

The whole set →
exceptional-web-design exceptional-web-design audits the visual design of Power Pages sites via live URL or source folder, returning prioritized critique without modifying any files. CX Codex +1 ★ 1,167repo stars scan-code scan-code — a Claude Code skill that scans a Power Pages project's source files and dependencies for vulnerabilities, hardcoded secrets, and license issues. Groups findings by category after running opengrep and trivy. CX Codex +1 ★ 1,167repo stars edit-offline-profile edit-offline-profile is a Claude Code skill that changes a table's sync scope, columns, or update interval in a Mobile Offline Profile. CX Codex +1 ★ 1,167repo stars add-seo add-seo adds robots.txt, sitemap.xml, meta tags, and Open Graph config to Power Pages SPA sites. Useful when preparing an existing portal for search engines. CX Codex +1 ★ 1,167repo stars pcf pcf is a skill that builds, tests, upgrades and deploys PCF code components for model-driven apps and Power Pages, including field, dataset and React controls. CX Codex +1 ★ 1,167repo stars create-webroles create-webroles sets up web roles for Power Pages sites directly in metadata files. It handles permission flags for anonymous and authenticated visitors without manual UUID editing. CX Codex +1 ★ 1,167repo stars setup-app-insights setup-app-insights is a Claude Code skill that configures Application Insights telemetry for Power Apps mobile apps. It can enable, switch, or disable telemetry. CX Codex +1 ★ 1,167repo stars build-ios-binary build-ios-binary compiles a PAM control's iOS Obj-C or Swift module into a flat device-slice .framework for a .ppmplugin bundle. Mac with Xcode only. CX Codex +1 ★ 1,167repo stars

Project sponsors

Companies that keep this analytics open