Skip to main content
skill CX Codex

wiggle-claude-skill — Claude Code skill: logo to Lottie, GIF and MP4

wiggle-claude-skill turns a static PNG, SVG or JPG logo into Lottie JSON, then renders it as a GIF and an MP4 and checks that the loop joins cleanly.

MIT 211 installs ★ 35 updated 2026-10-21

Install into Claude Code · Skills CLI (Vercel) All methods and platforms ↓
npx skills add podo/design-agent-skills --skill wiggle-claude-skill -a claude-code
Open on GitHub

What wiggle-claude-skill does

You hand it a finished logo file. The skill builds a Lottie JSON animation from motion-design presets, renders that file to GIF and MP4, then checks the loop for a visible jump at the wrap point. Python scripts inside the skill do the building and rendering.

Upstream calls the skill wiggle, so it lands under that name next to the catalogue pointer instead of replacing it. Invoke it with phrases like "logo animation" or "SVG to Lottie", or just ask for an animated logo.

Setup takes the most work: Python 3 with lottie[all], Pillow and pycairo, plus the Cairo system library (brew install cairo pkg-config on macOS, apt-get install libcairo2-dev pkg-config python3-dev on Debian). Skip Cairo and the GIF render fails. Multi-layer scenes, React components and anything animated in the browser are out of scope — the output here is a set of files.

What it helps with

  • turn a flat SVG logo into Lottie JSON
  • make a looping GIF from a PNG logo
  • render an MP4 from a Lottie animation
  • check that the animation wraps without a jump
  • produce motion assets from a JPG without hand-building frames

Example prompts for the agent

  • Animate logo.svg and build the Lottie JSON.
  • Render logo.png to a looping GIF and an MP4, then check the loop.
  • Rebuild the logo animation from the presets and confirm the loop closes.

How to install wiggle-claude-skill

1Skills CLI (Vercel)

npx skills add podo/design-agent-skills --skill wiggle-claude-skill -a claude-code

2Manually: put the files in place

~/.claude/skills/wiggle-claude-skill/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/wiggle-claude-skill/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about wiggle-claude-skill

How to install wiggle-claude-skill in Claude Code?

Run npx skills add podo/design-agent-skills --skill wiggle-claude-skill -a claude-code. The skill file ends up at ~/.claude/skills/wiggle-claude-skill/SKILL.md.

What does wiggle-claude-skill do?

It builds a logo animation in Lottie JSON from a PNG, SVG or JPG, renders it to GIF and MP4, and checks that the loop closes. Python scripts inside the skill handle both steps.

What has to be installed first?

Python 3 with lottie[all], Pillow and pycairo, plus the Cairo system library. Without Cairo the GIF render fails.

Source text

SKILL.md · MIT
---
name: wiggle-claude-skill
description: |
  Animates static logo images (PNG, SVG, JPG) into Lottie JSON, then renders them as animated
  GIFs and MP4s, with perfect-loop validation. Specialised for logo animation workflows.
triggers:
  - "logo animation"
  - "wiggle"
  - "SVG to Lottie"
  - "animated GIF"
  - "wiggle-claude-skill"
das:
  type: skill
  category: motion-animation
  upstream: "https://github.com/talknerdytome-labs/wiggle-claude-skill"
  upstream_path: "SKILL.md"
  version: latest
  install: true
---

# wiggle-claude-skill

> Catalogue stub — full skill: [talknerdytome-labs/wiggle-claude-skill](https://github.com/talknerdytome-labs/wiggle-claude-skill)

<!-- das:install:start — generated from stub.yaml by `npm run generate`; edit stub.yaml, not this block -->
## Decision tree

1. **Is the full skill already installed?**
   Upstream names this skill `wiggle`, so it installs next to this pointer (the pointer is not replaced).
   - Global: `f=~/.agents/skills/wiggle/SKILL.md; [ -f "$f" ] && ! grep -q "^das:" "$f" && echo "installed" || echo "pointer"`
   - Project: `f=.agents/skills/wiggle/SKILL.md; [ -f "$f" ] && ! grep -q "^das:" "$f" && echo "installed" || echo "pointer"`
   - `installed` → the skill is installed as `wiggle`, invoke it and proceed
   - `pointer` → go to step 2

2. **Detect scope, then install:**

   ```bash
   [ -e ~/.agents/skills/wiggle-claude-skill ] && echo "global" || echo "project"
   ```

   **Global:**
   ```bash
   npx skills add talknerdytome-labs/wiggle-claude-skill --skill wiggle -g -y
   ```

   **Project:**
   ```bash
   npx skills add talknerdytome-labs/wiggle-claude-skill --skill wiggle -y
   ```
   > **Claude Code:** send a command as a chat message starting with `!` to run it without leaving the conversation.

**Heads-up**

- **Requires:** Python 3 with `pip install lottie[all] Pillow pycairo`, plus the Cairo system library (`brew install cairo pkg-config`, or `apt-get install libcairo2-dev pkg-config python3-dev`)
- **License:** Apache-2.0 (LICENSE.txt; GitHub shows NOASSERTION)
<!-- das:install:end -->

## Invoke after install

- Skill name: `wiggle`
- Trigger phrases: "logo animation", "wiggle", "SVG to Lottie", "animated GIF", "wiggle-claude-skill"

## What it does

Specialised logo animation workflow: takes a static logo image (PNG, SVG or JPG) as input, builds an animation in Lottie JSON using motion-design presets, then renders the Lottie as an animated GIF and an MP4 video file, validating that the loop is seamless. Designed for brand logo animation where you need exportable motion assets rather than in-browser animation. The skill ships Python scripts and needs Cairo for GIF rendering.

## When NOT to use

- Complex multi-layer animations beyond logo scope (use `gsap-skills` or `framer-motion-skills`)
- In-browser or React component animation (the output here is standalone Lottie, GIF and MP4 files)

© podo · MIT · podo/design-agent-skills

Similar skills

All skills for Design →

From the same set108

The whole set →
design-sprint The design-sprint skill researches a codebase, drafts a feature plan, and proposes a parent issue with dependent sub-issues. It creates GitHub or Backlog issues only after you approve the content. CX Codex +1 212installs work-with-design-systems The work-with-design-systems skill reviews Figma design systems and guides their phased creation. Use it for WCAG checks, component readiness scoring, and developer handoff documents. CX Codex +1 212installs liquid-glass-skill Guides SwiftUI interface development with Apple's Liquid Glass styling for iOS 26 and macOS 26. Helps set up modifiers, grouped glass layers, and UI migrations. CX Codex +1 212installs taste-design-stitch taste-design-stitch builds tailored DESIGN.md files for Google Stitch to guide UI screens away from generic AI aesthetics. CX Codex +1 211installs d3js-skill d3js-skill guides an agent through building custom D3.js charts and interactive visuals. Useful when a standard chart library cannot express the design you need. CX Codex +1 211installs interface-design-dammyjay interface-design-dammyjay designs data-dense dashboards, admin panels, and SaaS tools without generic AI interface patterns. CX Codex +1 211installs claud3 claud3 picks a chart type from the question your data should answer, then writes a single-file D3 v7 page: dark theme, direct labels, annotations. CX Codex +1 211installs google-fonts-skill Searches Google Fonts by mood and personality, suggests pairings that work, and hands back CSS variables, a Tailwind config and embed links. CX Codex +1 210installs

Project sponsors

Companies that keep this analytics open