Skip to main content
skill CX Codex

claud3 — Claude Code skill: D3 charts on Tufte principles

claud3 picks a chart type from the question your data should answer, then writes a single-file D3 v7 page: dark theme, direct labels, annotations.

MIT 211 installs ★ 35 updated 2026-10-21

Install into Claude Code · Skills CLI (Vercel) All methods and platforms ↓
npx skills add podo/design-agent-skills --skill claud3 -a claude-code
Open on GitHub

What claud3 does

Start with the question the chart has to answer. The skill maps it onto a catalogue sorted by question type — change over time, comparison, spread, correlation, parts of a whole, flows, place — and picks a chart from there. Output is one HTML file built on D3 v7: dark theme, SVG that resizes, labels sitting next to the data instead of a legend, notes where something needs explaining.

Before the file comes out, the result is run against Tufte's design checklist. A playground mode turns the same data into an interactive page for trying chart types and tuning them. Inside the Claude plugin the skill is also reachable as the /d3-viz command.

This is a single-tool skill. Work that spans Chart.js, Plotly or AntV/G2 belongs to other skills. Keep one D3 skill per project: d3js-skill writes a directory named d3-viz as well, so a second install replaces the first.

What it helps with

  • choose a chart type that matches the question you're asking
  • produce a self-contained HTML chart on D3 v7
  • label data points directly instead of adding a legend
  • annotate outliers and turning points on the chart
  • check a finished chart against Tufte's checklist

Example prompts for the agent

  • /d3-viz chart revenue.csv — how did revenue change month over month?
  • claud3: show the spread of order totals, one HTML file please
  • Build a playground page so I can try different chart types on this dataset

How to install claud3

1Skills CLI (Vercel)

npx skills add podo/design-agent-skills --skill claud3 -a claude-code

2Manually: put the files in place

~/.claude/skills/claud3/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/claud3/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about claud3

How do I install claud3 in Claude Code?

Run npx skills add podo/design-agent-skills --skill claud3 -a claude-code. The skill file lands at ~/.claude/skills/claud3/SKILL.md.

What does claud3 do?

It reads the question your data should answer, picks a matching chart type, and writes a single-file D3 v7 page in a dark theme with direct labels and annotations.

Can I keep claud3 and d3js-skill in the same project?

No, both write a directory called d3-viz, and whichever installs second replaces the earlier one.

Source text

SKILL.md · MIT
---
name: claud3
description: |
  D3.js data visualization skill based on Edward Tufte principles. Selects the right chart
  type from a large catalogue by analyzing the data question, then generates single-file HTML with
  D3 v7, dark theme, responsive layout, direct labels, and annotations.
triggers:
  - "claud3"
  - "D3 Tufte"
  - "80 chart types"
  - "dtran320 D3"
  - "D3 dark theme"
das:
  type: skill
  category: data-visualization
  upstream: "https://github.com/dtran320/claud3"
  upstream_path: "skills/d3-viz/SKILL.md"
  version: latest
  install: true
---

# claud3

> Catalogue stub — full skill: [dtran320/claud3](https://github.com/dtran320/claud3) (the repo and plugin are called claud3; the skill it installs is `d3-viz`)

<!-- das:install:start — generated from stub.yaml by `npm run generate`; edit stub.yaml, not this block -->
## Decision tree

1. **Is the full skill already installed?**
   Upstream names this skill `d3-viz`, so it installs next to this pointer (the pointer is not replaced).
   - Global: `f=~/.agents/skills/d3-viz/SKILL.md; [ -f "$f" ] && ! grep -q "^das:" "$f" && echo "installed" || echo "pointer"`
   - Project: `f=.agents/skills/d3-viz/SKILL.md; [ -f "$f" ] && ! grep -q "^das:" "$f" && echo "installed" || echo "pointer"`
   - `installed` → the skill is installed as `d3-viz`, invoke it and proceed
   - `pointer` → go to step 2

2. **Detect scope, then install:**

   ```bash
   [ -e ~/.agents/skills/claud3 ] && echo "global" || echo "project"
   ```

   **Global:**
   ```bash
   npx skills add dtran320/claud3 --skill d3-viz -g -y
   ```

   **Project:**
   ```bash
   npx skills add dtran320/claud3 --skill d3-viz -y
   ```
   > **Claude Code:** send a command as a chat message starting with `!` to run it without leaving the conversation.

**Claude Code plugin route:**

```
/plugin marketplace add dtran320/claud3
/plugin install d3-viz@claud3
```

**Heads-up**

- **License:** no LICENSE file in the repo
- **Name collision:** `d3-viz` is also written by `d3js-skill` (its install or its catalogue pointer); installing both overwrites the earlier one.
<!-- das:install:end -->

## Invoke after install

- Skill name: `d3-viz`
- Via the Claude Code plugin it is also available as the `/d3-viz` command.
- Trigger phrases: "claud3", "D3 Tufte", "80 chart types", "D3 dark theme"

## What it does

Applies Edward Tufte's data visualization principles to D3.js chart generation. Analyzes the underlying data question ("how does X change over time?", "how is X spread?") to select the most appropriate chart type from a large catalogue organized by question type (temporal, comparison, distribution, correlation, composition, flow, spatial), then produces self-contained single-file HTML using D3 v7 with a dark theme, responsive SVG, direct data labels (no separate legend), and contextual annotations. Each chart is checked against a Tufte design checklist before output. A playground mode ("explore this data") gives an interactive page for trying chart types and refining.

## When NOT to use

- Multi-library visualization work (D3, Chart.js, Plotly) — use `data-viz-agent` or `antvis-chart-skills` instead
- AntV/G2 charts — use `antvis-chart-skills` instead
- Quick single charts without Tufte constraints — use `d3js-skill` instead (note: `d3js-skill` also installs a directory named `d3-viz`; install only one of the two in a project)

© podo · MIT · podo/design-agent-skills

Similar skills

All skills for Data and databases →

From the same set108

The whole set →
taste-design-stitch taste-design-stitch builds tailored DESIGN.md files for Google Stitch to guide UI screens away from generic AI aesthetics. CX Codex +1 211installs wiggle-claude-skill wiggle-claude-skill turns a static PNG, SVG or JPG logo into Lottie JSON, then renders it as a GIF and an MP4 and checks that the loop joins cleanly. CX Codex +1 211installs d3js-skill d3js-skill guides an agent through building custom D3.js charts and interactive visuals. Useful when a standard chart library cannot express the design you need. CX Codex +1 211installs interface-design-dammyjay interface-design-dammyjay designs data-dense dashboards, admin panels, and SaaS tools without generic AI interface patterns. CX Codex +1 211installs google-fonts-skill Searches Google Fonts by mood and personality, suggests pairings that work, and hands back CSS variables, a Tailwind config and embed links. CX Codex +1 210installs design-consultation This skill guides a structured design consultation to shape a product’s visual language, typography, color tokens, spacing scale, and component library. Use it to establish a design system from scratch. CX Codex +1 210installs ux-ui-mastery ux-ui-mastery — a router skill for UX/UI: it checks whether the Sumi package is already installed and, when it is not, pulls in its 45 topic skills, from Nielsen heuristics to motion design. CX Codex +1 210installs claude2figma claude2figma enforces design system tokens and master components when writing to Figma via Figma MCP. It validates style and variable bindings after every canvas edit. CX Codex +1 210installs

Project sponsors

Companies that keep this analytics open