robodojo-return-to-start — Claude Code skill for arm reset
The robodojo-return-to-start Claude Code skill applies RoboDojo’s finishing posture after the general return procedure. It restores used empty arms to their initial poses and checks their clearance from the result.
MIT ★ 488 updated 2026-11-15
npx skills add Open-RUA/uni-robot-agent --skill robodojo-return-to-start -a claude-codeWhat robodojo-return-to-start does
The skill sets the RoboDojo arm finish after the general return procedure. It reads each arm’s starting control_pose from step=0. When the task requires no continued contact, each used empty arm returns to that pose under the task’s and system prompt’s finishing requirements. The skill checks position and orientation, then confirms that neither arm disturbs the result.
The general procedure uses general/gripper/return-to-start/SKILL.md. RoboDojo’s native return threshold is measured at link6, not at the grasp site; an orientation error can shift link6 even when the grasp-site position matches. The skill provides no universal numeric tolerance. It follows the threshold declared by the current task and does not convert it into a grasp-site position tolerance.
What it helps with
- return an empty arm to its starting pose after a task
- check both arms’ position and orientation
- keep the arms clear of the completed result
- apply a task’s native
link6return threshold
Example prompts for the agent
- After the task, return both empty arms to their starting poses and check that they leave the result untouched.
- Apply the RoboDojo return procedure and compare
link6with the task threshold. - Read the initial
control_posevalues fromstep=0and finish under the system requirements.
How to install robodojo-return-to-start
1Skills CLI (Vercel)
npx skills add Open-RUA/uni-robot-agent --skill robodojo-return-to-start -a claude-code2Manually: put the files in place
~/.claude/skills/return-to-start/SKILL.mdCopy the whole skill folder; for one project use .claude/skills/return-to-start/
1Skills CLI (Vercel)
npx skills add Open-RUA/uni-robot-agent --skill robodojo-return-to-start -a codex2Manually: put the files in place
.agents/skills/return-to-start/SKILL.mdFor all projects use ~/.agents/skills/
1Skills CLI (Vercel)
npx skills add Open-RUA/uni-robot-agent --skill robodojo-return-to-start -a cursor2Manually: put the files in place
.cursor/skills/return-to-start/SKILL.mdCursor also reads .agents/skills/ and .claude/skills/
1GitHub CLI
gh skill install Open-RUA/uni-robot-agent uni_robot_agent/resources/skills/robodojo/gripper/return-to-start2Manually: put the files in place
.github/skills/return-to-start/SKILL.md1Skills CLI (Vercel)
npx skills add Open-RUA/uni-robot-agent --skill robodojo-return-to-start -a gemini-cli2Platform CLI
gemini skills install https://github.com/Open-RUA/uni-robot-agent --path uni_robot_agent/resources/skills/robodojo/gripper/return-to-startManually: put the files in place
.devin/skills/return-to-start/SKILL.mdThe legacy .windsurf/skills/ path still works
Claude.ai
Zip the folder and upload it in Settings → Capabilities → Skills
Step by step, with commands for each platform: How to install skills in Claude Code: five ways
Questions about robodojo-return-to-start
How do I install robodojo-return-to-start in Claude Code?
Run npx skills add Open-RUA/uni-robot-agent --skill robodojo-return-to-start -a claude-code. The skill file is at ~/.claude/skills/return-to-start/SKILL.md.
What does robodojo-return-to-start do?
It restores used empty RoboDojo arms to their initial poses after the general return procedure, then checks their orientation, position, and clearance from the result.
Which return threshold does robodojo-return-to-start use?
The native threshold is measured at link6, rather than at the grasp site. The skill uses the current task’s declared threshold and sets no universal numeric tolerance.
Source text
SKILL.md · MIT
--- name: robodojo-return-to-start description: Apply RoboDojo finishing-posture and native link6 return semantics after the general return procedure. --- # Apply the RoboDojo return reference Use `general/gripper/return-to-start/SKILL.md` for release, clearance and pose verification. Read each arm's initial grasp-site control_pose from step=0. When no continued contact is required, return each used empty arm to that pose, following the task and system prompt's finishing requirements. Verify position and orientation, and check both arms are clear without disturbing the result. Official native return-position thresholds are measured at link6, not at the grasp site; orientation error can displace link6 even when the site position matches. Restore the full initial pose accurately. Do not reinterpret a native link6 position threshold as a grasp-site position tolerance or add stricter task requirements. Follow the current task's declared thresholds; this skill does not supply a universal numeric return tolerance.
© Open-RUA · MIT · Open-RUA/uni-robot-agent