Skip to main content
skill CX Codex

contents-transfer — Claude Code skill: what it does, how to install

contents-transfer — a skill for Claude Code that transfers loose contents from a held vessel into a receiver. It tracks outlet alignment, flow, and what remains.

MIT ★ 488 updated 2026-11-15

Install into Claude Code · Skills CLI (Vercel) All methods and platforms ↓
npx skills add Open-RUA/uni-robot-agent --skill contents-transfer -a claude-code
Open on GitHub

What contents-transfer does

The skill transfers loose contents from a held vessel to a chosen receiver. It identifies the source, destination, and requested amount from the instruction, then checks how the vessel outlet lines up with the receiving opening. If contents miss, it adjusts the alignment instead of increasing the tilt.

After the transfer, it inspects the receiver, the source remainder, and visible spills. An empty source alone does not confirm delivery. In a step-driven environment, use hold to advance physics and observe between intervals. For a partial transfer, progress is measured against the requested amount rather than an empty source.

The skill uses general/SKILL.md for grasping and transport. It returns the source to stable support while retaining any remaining contents.

What it helps with

  • pour contents from a held vessel into a receiver
  • correct the outlet alignment when contents miss the receiver
  • inspect the source remainder after a transfer
  • transfer a specified portion without emptying the source

Example prompts for the agent

  • Pour the contents from the cup into the container and check where they land.
  • Transfer part of the jar's contents into the bowl, leaving some behind.
  • Check that the contents reached the receiver, then return the source to stable support.

How to install contents-transfer

1Skills CLI (Vercel)

npx skills add Open-RUA/uni-robot-agent --skill contents-transfer -a claude-code

2Manually: put the files in place

~/.claude/skills/contents-transfer/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/contents-transfer/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about contents-transfer

How do I install contents-transfer in Claude Code?

Run npx skills add Open-RUA/uni-robot-agent --skill contents-transfer -a claude-code. The skill file is at ~/.claude/skills/contents-transfer/SKILL.md.

What does contents-transfer do?

It guides an agent through pouring loose contents from a held vessel into a receiver. The agent monitors the flow and remaining contents, then inspects the receiver and visible spills.

How does contents-transfer handle a partial transfer?

It checks progress against the requested amount instead of requiring the source to be empty. If the amount cannot be observed, it treats that quantity as uncertain.

Source text

SKILL.md · MIT
---
name: contents-transfer
description: Transfer loose contents from a held container while monitoring outlet alignment, flow and remaining contents. Use when the goal concerns contents rather than placement of the vessel itself.
---

# Observe where the contents actually go

Use `general/SKILL.md` for holding and transport. Identify the requested source,
recipient and transfer amount from the current instruction. Keep source-to-target
pairings explicit when several similar containers are present.

Preserve contents while establishing a secure grasp and reachable route. An
exploratory tip can spill before the receiving opening is ready. Choose contact
from the vessel's current support and orientation; an upright approach does not
transfer unchanged to a vessel lying on its side.

Observe the actual outlet and receiving opening. Establish their relationship
before tilting, then change tilt in bounded segments and inspect the flow or
falling contents. If they miss, stop increasing tilt and correct the outlet-to-
opening relationship while preserving the remaining contents. Rotation about the grasp site
alone does not establish transfer, and releasing the vessel does not replace
pouring its contents.

Inspect the receiver, remaining source contents and visible spills together.
An empty source alone does not prove delivery to the intended destination.
When flow is correctly directed in a step-driven environment, use hold to advance
physics and observe between intervals. Job-wait tools wait for submitted work;
read-only observations do not themselves advance a stepped transfer. In a
continuously running environment, account for elapsed time and observation latency.

For full transfer, first arrival in the receiver is insufficient. If visible
contents remain after flow stops, inspect the outlet and adjust tilt or position
as needed. For a specified partial transfer, judge progress against that amount;
do not apply an empty-source rule. Keep an unobservable amount uncertain.

Return the source to stable support while retaining the load and remaining
contents. After a spill, inspect what remains feasible before recovery; gathering
individual loose items need not be equivalent to the instructed operation.

© Open-RUA · MIT · Open-RUA/uni-robot-agent

Similar skills

All skills for DevOps and infrastructure →

From the same set41

The whole set →
clean The clean Claude Code prompt controls a robot arm through motion and observation commands. It guides instruction execution and checks results between actions. GP ChatGPT ★ 488repo stars system The system Claude Code prompt guides control of a dual-arm ARX X5 robot in a live RoboDojo episode. The agent consults skills, observes the scene, and checks action results before proceeding. GP ChatGPT ★ 488repo stars robodojo-return-to-start The robodojo-return-to-start Claude Code skill applies RoboDojo’s finishing posture after the general return procedure. It restores used empty arms to their initial poses and checks their clearance from the result. CX Codex +1 ★ 488repo stars deformable-material The deformable-material Claude Code skill moves selected regions of flexible material and checks their shape after release. It applies when deformation makes rigid-object poses or earlier contact coordinates unreliable. CX Codex +1 ★ 488repo stars moving-target-control The moving-target-control Claude Code skill plans contact with moving physical objects and checks whether a grasp holds. It activates when a target or receiver may move during approach or transfer. CX Codex +1 ★ 488repo stars return-to-start return-to-start — a skill for Claude Code and Codex guides robotic arms back to their measured starting poses. Verifies position and orientation tolerances before ending the movement. CX Codex +1 ★ 488repo stars held-object-geometry The held-object-geometry Claude Code skill locates a held object's relevant feature relative to the hand. It applies to clearance checks, placement, and tool contact during robot motion. CX Codex +1 ★ 488repo stars reachability-and-recovery The reachability-and-recovery Claude Code skill selects an arm, approach, and permitted relay for a complete gripper route. It activates when the destination is hard to reach or an existing route needs reassignment. CX Codex +1 ★ 488repo stars

Project sponsors

Companies that keep this analytics open