Skip to main content
skill CX Codex

openspec-continue-change — Claude Code skill

openspec-continue-change — a skill for Claude Code, Cursor, and other AI editors that advances an OpenSpec change by creating the next artifact.

MIT 3,900 installs ★ 75,426 updated 2026-11-16

Install into Claude Code · Skills CLI (Vercel) All methods and platforms ↓
npx skills add Fission-AI/OpenSpec --skill openspec-continue-change -a claude-code
Open on GitHub

What openspec-continue-change does

Available in Claude Code, Codex, Cursor, GitHub Copilot, Gemini CLI, and OpenCode. The skill interfaces with the OpenSpec CLI to track the current change state, determine which artifacts are ready to create, fetch their instructions, and execute the next step. It selects the active change—or prompts you to pick from recent ones—then either generates the following artifact or signals that planning is complete.

If an artifact creation was interrupted mid-write, the skill resumes and completes any missing files. It handles multiple OpenSpec stores via the --store <id> flag. Requires the OpenSpec CLI installed and a project already initialized. The skill does not auto-create a new project; run openspec init first or point to an existing store.

What it helps with

  • resume an incomplete OpenSpec change
  • generate the next artifact in the plan
  • check planning status and pending tasks
  • finish an interrupted artifact with missing files
  • select an active change from the list

Example prompts for the agent

  • Continue my OpenSpec change by creating the next artifact
  • Use /openspec-continue-change to advance the workflow
  • Run openspec continue and finish the missing spec files

How to install openspec-continue-change

1Skills CLI (Vercel)

npx skills add Fission-AI/OpenSpec --skill openspec-continue-change -a claude-code

2Manually: put the files in place

~/.claude/skills/openspec-continue-change/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/openspec-continue-change/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about openspec-continue-change

How do I install openspec-continue-change in Claude Code?

Run npx skills add Fission-AI/OpenSpec --skill openspec-continue-change -a claude-code, then open ~/.claude/skills/openspec-continue-change/SKILL.md and follow the steps. For other platforms, change the flag: -a codex for Codex, -a cursor for Cursor, -a gemini-cli for Gemini CLI.

What does openspec-continue-change do?

The skill resumes work on an OpenSpec change by checking planning status, selecting the next ready artifact, and creating it. If a prior artifact was cut short, it finishes the missing files. You can work on the current change or choose from a list.

What do I need to use this skill?

You need OpenSpec CLI installed and a project initialized (openspec init or a registered store via --store <id>). The skill runs on Claude Code, Cursor, GitHub Copilot, and other supported platforms.

Source text

SKILL.md · MIT
---
name: openspec-continue-change
description: Continue working on an OpenSpec change by creating the next artifact. Use when the user wants to progress their change, create the next artifact, or continue their workflow. Also use when the user says "openspec continue" or "opsx continue".
allowed-tools: Bash(openspec:*)
license: MIT
compatibility: Requires openspec CLI.
metadata:
  author: openspec
  version: "1.0"
---

Continue working on a change by creating the next artifact.

**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.

**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.

One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.

Otherwise, with no root, what happens next depends on how this workflow was reached:

- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or invoking this skill by name. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or invoked this skill by name. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.

In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.

**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.

**Steps**

1. **Select the change**

   If a name is provided, use it. Otherwise:
   - Infer from conversation context if the user mentioned a change
   - Auto-select if only one active change exists
   - If ambiguous, run `openspec list --json` to get available changes sorted by most recently modified, and ask the user to select one

   When prompting, present the top 3-4 most recently modified changes as options, showing:
   - Change name
   - Status (e.g., "0/5 tasks", "complete", "no tasks")
   - How recently it was modified (from `lastModified` field)

   Mark the most recently modified change as "(Recommended)" since it's likely what the user wants to continue.

   Always announce: "Using change: <name>" and how to override (e.g., `/openspec-continue-change <other>`).

2. **Check current status**
   ```bash
   openspec status --change "<name>" --json
   ```
   Parse the JSON to understand current state. The response includes:
   - `schemaName`: The workflow schema being used (e.g., "spec-driven")
   - `artifacts`: Array of artifacts with their status ("done", "skipped", "ready", "blocked")
   - `isPlanningComplete`: Boolean indicating if all planning artifacts are complete. Older CLI versions expose the same value as `isComplete`.
   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context. Use these instead of assuming repo-local paths.

3. **Act based on status**:

   ---

   **Before anything else, finish a partly written artifact**:
   - An artifact whose output is a glob pattern (e.g. `specs/**/*.md`) reads `done` as soon as one matching file exists, so a run interrupted while writing its files leaves it `done` with some still missing
   - For each such `done` artifact, first get its instructions and read any completed dependencies needed to determine the expected files. Then compare those files with `artifactPaths.<id>.existingOutputPaths`. For spec-driven's `specs`, read the proposal and check for one `specs/<capability-path>/spec.md` per capability it lists; resolve each expected path against `changeRoot` before comparing path identity, and verify each one remains inside `changeRoot` after resolving symlinks, both in its parent directories and in the file itself if it already exists
   - Never write an expected path that fails that check; stop and tell the user. If any are missing, write only the missing files, each at its checked path - when the `instruction` field delegates creation to a skill or command, invoke it only if it can write each file to its checked path; otherwise stop and tell the user - and STOP - that counts as this invocation's ONE artifact. If you cannot tell whether a file was left out on purpose, ask the user

   ---

   **If all planning artifacts are complete (`isPlanningComplete: true`, or legacy `isComplete: true`)**:
   - Congratulate the user
   - Show final status including the schema used
   - Suggest: "Planning is complete! You can now implement this change. Once implementation and any tracked work are complete, archive it."
   - STOP

   ---

   **If artifacts are ready to create** (status shows artifacts with `status: "ready"`):
   - Pick the FIRST artifact with `status: "ready"` from the status output
   - Get its instructions:
     ```bash
     openspec instructions <artifact-id> --change "<name>" --json
     ```
   - Parse the JSON. The key fields are:
     - `context`: Project background (constraints for you - do NOT include in output)
     - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
     - `template`: The structure to use for your output file
     - `instruction`: Schema-specific guidance
     - `resolvedOutputPath`: Resolved path or pattern to write the artifact
     - `dependencies`: Completed artifacts to read for context (entries with `skipped: true` have no files - do not look for them)
     - `skipped`/`warning`: present when the change declares skip_specs and this artifact must NOT be created - pick another artifact
   - **Create the artifact file**:
     - Read any completed dependency files for context - always re-read them from disk, even if you saw them earlier in the conversation (the user may have edited them)
     - Choose the output path before creating anything. If the `resolvedOutputPath` specified in instructions is a glob pattern, choose a concrete path inside `changeRoot` using the schema instruction and the change's context, and verify it remains inside `changeRoot` after resolving symlinks, both in its parent directories and in the file itself if it already exists; if it does not, stop and tell the user. Otherwise the output path is `resolvedOutputPath`
     - If the `instruction` field delegates creation to a specific skill or command, invoke it only if it can write the artifact to that output path; otherwise stop and tell the user
     - Otherwise, write it yourself:
       - Use `template` as the structure - fill in its sections
       - Apply `context` and `rules` as constraints when writing - but do NOT copy them into the file
       - Write the file to that output path
     - Either way, verify the artifact file exists at that output path
   - Show what was created and what's now unlocked
   - STOP after creating ONE artifact

   ---

   **If no artifacts are ready (all blocked)**:
   - This shouldn't happen with a valid schema
   - Show status and suggest checking for issues

4. **After creating an artifact, show progress**
   ```bash
   openspec status --change "<name>"
   ```

**Output**

After each invocation, show:
- Which artifact was created
- Schema workflow being used
- Current progress (N/M complete)
- What artifacts are now unlocked
- Prompt: "Want to continue? Just ask me to continue or tell me what to do next."

**Artifact Creation Guidelines**

The artifact types and their purpose depend on the schema. The `instruction` field from the instructions output is the authoritative guidance for each artifact - follow it even when the artifact has a familiar name (proposal.md, tasks.md, etc.), since custom schemas may define different content or a different process for the same file names.

If the `instruction` field directs you to use a specific skill or command to create the artifact, invoke it instead of writing the artifact directly - but only once you have chosen and checked the output path, and only if it can write there.

**Guardrails**
- Create ONE artifact per invocation
- Always read dependency artifacts before creating a new one - re-read from disk, not from conversation memory (files may have changed since you last saw them)
- Never skip artifacts or create out of order
- If context is unclear, ask the user before creating
- Verify the artifact file exists after writing before marking progress
- Use the schema's artifact sequence, don't assume specific artifact names
- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
  - These guide what you write, but should never appear in the output

© openspec · MIT · Fission-AI/OpenSpec

Similar skills

All skills for Agent setup: memory, context, orchestration →

From the same set12

The whole set →
openspec-apply-change The openspec-apply-change skill guides an agent through implementing tasks from an OpenSpec change. It pulls context files and tracks task progress directly against the specification. CX Codex +1 4,500installs openspec-explore openspec-explore is a Claude Code skill that puts the agent into thinking-partner mode. It activates before or during an OpenSpec change to clarify the problem, not write code. CX Codex +1 4,500installs openspec-ff-change openspec-ff-change — a Claude Code skill that prepares the OpenSpec artifacts needed to begin implementation in one pass. It responds to requests for a fast setup or to openspec ff and opsx ff. CX Codex +1 4,500installs openspec-onboard This Claude Code skill guides a first OpenSpec cycle, from choosing a task to archiving a change. It starts when someone asks for “openspec onboard” or “opsx onboard”. CX Codex +1 4,400installs openspec-bulk-archive-change openspec-bulk-archive-change archives multiple completed OpenSpec changes in one go. Useful when you need to close several parallel tasks at once. CX Codex +1 4,400installs openspec-sync-specs openspec-sync-specs syncs delta specs from an active OpenSpec change directly into main project specs without triggering change archiving. CX Codex +1 4,300installs openspec-verify-change openspec-verify-change is a Claude Code skill that checks code against OpenSpec specs, tasks, and design before archiving a change. CX Codex +1 4,000installs openspec-new-change openspec-new-change — a skill for Claude Code that initializes new changes using OpenSpec artifact workflows. It scaffolds the change folder, reads artifact status, and fetches initial step instructions. CX Codex +1 3,800installs

More in the catalog

Project sponsors

Companies that keep this analytics open