К основному содержанию
скилл CX Codex

openspec-continue-change — скилл для Claude Code

Скилл openspec-continue-change для Claude Code, Cursor и других AI-редакторов помогает продолжить работу над OpenSpec-изменением, создав следующий артефакт.

MIT 3 900 установок ★ 75 426 обновлён 2026-11-16

Установить в Claude Code · Через Skills CLI (Vercel) Все способы и платформы ↓
npx skills add Fission-AI/OpenSpec --skill openspec-continue-change -a claude-code
Открыть на GitHub

Что делает openspec-continue-change

Скилл интегрируется с OpenSpec CLI и следит за статусом текущего изменения: проверяет, какие артефакты готовы к созданию, получает их инструкции и выполняет следующий шаг в рабочем процессе.

При запуске выбирает активное изменение (или просит выбрать из списка), проверяет его статус и либо создаёт следующий артефакт, либо подсказывает, что планирование завершено и можно переходить к реализации. Если артефакт был прерван на середине, скилл довершит недостающие файлы. Работает с несколькими хранилищами OpenSpec через флаг --store <id>.

Требует установленный OpenSpec CLI и инициализированный проект. Скилл не создаёт новый проект автоматически — сначала нужно запустить openspec init или указать существующее хранилище.

Какие задачи решает

  • продолжить незаконченное OpenSpec-изменение
  • создать следующий артефакт в плане
  • проверить статус планирования и задач
  • довершить прерванный артефакт с недостающими файлами
  • выбрать активное изменение из списка

Примеры запросов агенту

  • Продолжи работу над моим OpenSpec-изменением
  • /openspec-continue-change для создания следующего артефакта
  • Запусти openspec continue и создай недостающие файлы спеки

Как установить openspec-continue-change

1Через Skills CLI (Vercel)

npx skills add Fission-AI/OpenSpec --skill openspec-continue-change -a claude-code

2Вручную: положить файлы

~/.claude/skills/openspec-continue-change/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/openspec-continue-change/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы об openspec-continue-change

Как установить openspec-continue-change в Claude Code?

Запусти npx skills add Fission-AI/OpenSpec --skill openspec-continue-change -a claude-code, затем открой ~/.claude/skills/openspec-continue-change/SKILL.md и следуй инструкциям. Для других платформ замени флаг: -a codex для Codex, -a cursor для Cursor, -a gemini-cli для Gemini CLI.

Что делает openspec-continue-change?

Скилл продолжает работу над OpenSpec-изменением, проверяя статус планирования, выбирая готовый артефакт и создавая его следующий файл. Если артефакт был прерван, скилл довершает недостающие файлы. Работает с текущим изменением или просит выбрать из списка.

Что нужно для работы скилла?

Требуется установленный OpenSpec CLI и инициализированный проект (openspec init или подключённое хранилище через --store <id>). Скилл работает в Claude Code, Cursor, GitHub Copilot и других поддерживаемых платформах.

Исходный текст

SKILL.md · MIT
---
name: openspec-continue-change
description: Continue working on an OpenSpec change by creating the next artifact. Use when the user wants to progress their change, create the next artifact, or continue their workflow. Also use when the user says "openspec continue" or "opsx continue".
allowed-tools: Bash(openspec:*)
license: MIT
compatibility: Requires openspec CLI.
metadata:
  author: openspec
  version: "1.0"
---

Continue working on a change by creating the next artifact.

**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.

**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.

One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.

Otherwise, with no root, what happens next depends on how this workflow was reached:

- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or invoking this skill by name. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or invoked this skill by name. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.

In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.

**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.

**Steps**

1. **Select the change**

   If a name is provided, use it. Otherwise:
   - Infer from conversation context if the user mentioned a change
   - Auto-select if only one active change exists
   - If ambiguous, run `openspec list --json` to get available changes sorted by most recently modified, and ask the user to select one

   When prompting, present the top 3-4 most recently modified changes as options, showing:
   - Change name
   - Status (e.g., "0/5 tasks", "complete", "no tasks")
   - How recently it was modified (from `lastModified` field)

   Mark the most recently modified change as "(Recommended)" since it's likely what the user wants to continue.

   Always announce: "Using change: <name>" and how to override (e.g., `/openspec-continue-change <other>`).

2. **Check current status**
   ```bash
   openspec status --change "<name>" --json
   ```
   Parse the JSON to understand current state. The response includes:
   - `schemaName`: The workflow schema being used (e.g., "spec-driven")
   - `artifacts`: Array of artifacts with their status ("done", "skipped", "ready", "blocked")
   - `isPlanningComplete`: Boolean indicating if all planning artifacts are complete. Older CLI versions expose the same value as `isComplete`.
   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context. Use these instead of assuming repo-local paths.

3. **Act based on status**:

   ---

   **Before anything else, finish a partly written artifact**:
   - An artifact whose output is a glob pattern (e.g. `specs/**/*.md`) reads `done` as soon as one matching file exists, so a run interrupted while writing its files leaves it `done` with some still missing
   - For each such `done` artifact, first get its instructions and read any completed dependencies needed to determine the expected files. Then compare those files with `artifactPaths.<id>.existingOutputPaths`. For spec-driven's `specs`, read the proposal and check for one `specs/<capability-path>/spec.md` per capability it lists; resolve each expected path against `changeRoot` before comparing path identity, and verify each one remains inside `changeRoot` after resolving symlinks, both in its parent directories and in the file itself if it already exists
   - Never write an expected path that fails that check; stop and tell the user. If any are missing, write only the missing files, each at its checked path - when the `instruction` field delegates creation to a skill or command, invoke it only if it can write each file to its checked path; otherwise stop and tell the user - and STOP - that counts as this invocation's ONE artifact. If you cannot tell whether a file was left out on purpose, ask the user

   ---

   **If all planning artifacts are complete (`isPlanningComplete: true`, or legacy `isComplete: true`)**:
   - Congratulate the user
   - Show final status including the schema used
   - Suggest: "Planning is complete! You can now implement this change. Once implementation and any tracked work are complete, archive it."
   - STOP

   ---

   **If artifacts are ready to create** (status shows artifacts with `status: "ready"`):
   - Pick the FIRST artifact with `status: "ready"` from the status output
   - Get its instructions:
     ```bash
     openspec instructions <artifact-id> --change "<name>" --json
     ```
   - Parse the JSON. The key fields are:
     - `context`: Project background (constraints for you - do NOT include in output)
     - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
     - `template`: The structure to use for your output file
     - `instruction`: Schema-specific guidance
     - `resolvedOutputPath`: Resolved path or pattern to write the artifact
     - `dependencies`: Completed artifacts to read for context (entries with `skipped: true` have no files - do not look for them)
     - `skipped`/`warning`: present when the change declares skip_specs and this artifact must NOT be created - pick another artifact
   - **Create the artifact file**:
     - Read any completed dependency files for context - always re-read them from disk, even if you saw them earlier in the conversation (the user may have edited them)
     - Choose the output path before creating anything. If the `resolvedOutputPath` specified in instructions is a glob pattern, choose a concrete path inside `changeRoot` using the schema instruction and the change's context, and verify it remains inside `changeRoot` after resolving symlinks, both in its parent directories and in the file itself if it already exists; if it does not, stop and tell the user. Otherwise the output path is `resolvedOutputPath`
     - If the `instruction` field delegates creation to a specific skill or command, invoke it only if it can write the artifact to that output path; otherwise stop and tell the user
     - Otherwise, write it yourself:
       - Use `template` as the structure - fill in its sections
       - Apply `context` and `rules` as constraints when writing - but do NOT copy them into the file
       - Write the file to that output path
     - Either way, verify the artifact file exists at that output path
   - Show what was created and what's now unlocked
   - STOP after creating ONE artifact

   ---

   **If no artifacts are ready (all blocked)**:
   - This shouldn't happen with a valid schema
   - Show status and suggest checking for issues

4. **After creating an artifact, show progress**
   ```bash
   openspec status --change "<name>"
   ```

**Output**

After each invocation, show:
- Which artifact was created
- Schema workflow being used
- Current progress (N/M complete)
- What artifacts are now unlocked
- Prompt: "Want to continue? Just ask me to continue or tell me what to do next."

**Artifact Creation Guidelines**

The artifact types and their purpose depend on the schema. The `instruction` field from the instructions output is the authoritative guidance for each artifact - follow it even when the artifact has a familiar name (proposal.md, tasks.md, etc.), since custom schemas may define different content or a different process for the same file names.

If the `instruction` field directs you to use a specific skill or command to create the artifact, invoke it instead of writing the artifact directly - but only once you have chosen and checked the output path, and only if it can write there.

**Guardrails**
- Create ONE artifact per invocation
- Always read dependency artifacts before creating a new one - re-read from disk, not from conversation memory (files may have changed since you last saw them)
- Never skip artifacts or create out of order
- If context is unclear, ask the user before creating
- Verify the artifact file exists after writing before marking progress
- Use the schema's artifact sequence, don't assume specific artifact names
- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
  - These guide what you write, but should never appear in the output

© openspec · MIT · Fission-AI/OpenSpec

Похожие скиллы

Все скиллы по теме «Настройка агента: память, контекст, субагенты» →
openspec-context-loading forztf Скилл openspec-context-loading для Claude Code находит спецификации, изменения и требования в проекте и собирает готовую сводку для агента. Читает структуру OpenSpec напрямую. CX Codex +1 1 100установок 042-planning-openspec Juan Antonio Breña Moral Скилл 042-planning-openspec собирает артефакты OpenSpec — proposal, design, спецификации и задачи — из issue, плана или ADR. Полезен, когда требования уже есть, а разбить их на проверяемые изменения ещё нужно. CX Codex +1 330установок openspec-implementation forztf Скилл openspec-implementation для Claude Code последовательно выполняет задачи утверждённых спецификаций OpenSpec, проверяя каждую тестами перед переходом дальше. CX Codex +1 1 400установок openspec itechmeat Скилл для работы с OpenSpec: объясняет артефактный граф, разрешение схем и шаблонов, жизненный цикл изменений и команды /opsx:. CX Codex +1 855установок spec-workflow TencentCloudBase Скилл spec-workflow для Claude Code структурирует разработку средних и крупных задач через артефакты требований, дизайна и плана. Включается перед написанием кода при нечётких критериях приёмки. CX Codex +1 1 200установок plan owainlewis Скилл plan делит спецификацию на законченные вертикальные срезы, каждый из которых агент сдаёт в одном pull request. Срабатывает при планировании крупной задачи перед написанием кода. CX Codex +1 788установок

Из того же набора12

Весь набор →
openspec-apply-change Скилл openspec-apply-change для Claude Code и других агентов запускает пошаговую реализацию задач из спецификации OpenSpec в кодовой базе. Берёт готовое изменение и выполняет пункты плана разработки. CX Codex +1 4 500установок openspec-explore Скилл openspec-explore для Claude Code переключает агента в режим думающего партнёра. Запускается, чтобы разобраться с задачей или уточнить требования до начала реализации. CX Codex +1 4 500установок openspec-ff-change Скилл openspec-ff-change для Claude Code, который проводит создание артефактов OpenSpec за один проход. Запускается по просьбе быстро подготовить всё для начала реализации или по командам openspec ff и opsx ff. CX Codex +1 4 500установок openspec-onboard Проводит через полный цикл работы в OpenSpec, от выбора задачи до архивации изменений. Запускается по запросу «openspec onboard» или «opsx onboard». CX Codex +1 4 400установок openspec-bulk-archive-change Скилл openspec-bulk-archive-change для Claude Code и других платформ: архивирует несколько завершённых изменений OpenSpec за один раз. Закрывает параллельные задачи пачкой. CX Codex +1 4 400установок openspec-sync-specs Скилл openspec-sync-specs переносит дельта-спецификации из активного изменения OpenSpec в основные файлы требований без отправки задачи в архив. CX Codex +1 4 300установок openspec-verify-change Скилл openspec-verify-change сверяет написанный код со спецификациями, задачами и архитектурой OpenSpec перед архивацией изменения. Пригодится при финальной приёмке задач. CX Codex +1 4 000установок openspec-new-change Скилл openspec-new-change для Claude Code создаёт новые изменения через рабочий процесс OpenSpec. Формирует каталог изменения, проверяет статус артефактов и показывает инструкции для первого шага. CX Codex +1 3 800установок

Ещё в каталоге

Спонсоры проекта

Компании, которые помогают держать аналитику открытой