Skip to main content
skill CX Codex

eda-drc — Claude Code skill: DRC and ERC checks in KiCad

eda-drc runs ERC and DRC on a KiCad project, checks the results against your constraints and part stock, then writes a readiness report.

no license 162 installs ★ 21 updated 2026-01-01

Install into Claude Code · Skills CLI (Vercel) All methods and platforms ↓
npx skills add l3wi/claude-eda --skill eda-drc -a claude-code
Open on GitHub

What eda-drc does

Use it as the last pass before you order boards. The skill calls the KiCad MCP server for ERC on the schematic and DRC on the layout, compares what comes back with docs/design-constraints.json, pulls stock and price for the chosen parts on LCSC, and writes it all into docs/validation-report.md. Ask it to check the design or whether fabrication is safe, and it takes over.

Five scopes drive it: /eda-check schematic, /eda-check pcb, /eda-check components, /eda-check manufacturing, plus /eda-check full to run everything. The report opens with a PASS/FAIL table per block, then lists critical errors, warnings and the sign-off boxes. Notes on frequent faults and fab capabilities ship with the skill.

You need hardware/*.kicad_sch, hardware/*.kicad_pcb, docs/design-constraints.json and docs/component-selections.md in place. The kicad-pcb and jlc MCP servers have to be connected too, because DRC runs and stock lookups go through them.

What it helps with

  • catch clearance and trace-width violations before the board is ordered
  • confirm every chosen part is in stock at LCSC
  • produce a PASS/FAIL summary you can sign off on
  • check Gerbers, BOM and the position file against fab limits
  • spot unconnected power pins while the schematic is still easy to change

Example prompts for the agent

  • Run /eda-check full and list every violation
  • Do /eda-check pcb and walk me through the DRC errors
  • Check stock for the parts in docs/component-selections.md with /eda-check components

How to install eda-drc

1Skills CLI (Vercel)

npx skills add l3wi/claude-eda --skill eda-drc -a claude-code

2Manually: put the files in place

~/.claude/skills/eda-drc/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/eda-drc/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about eda-drc

How do I install eda-drc in Claude Code?

Run npx skills add l3wi/claude-eda --skill eda-drc -a claude-code. That puts the skill at ~/.claude/skills/eda-drc/SKILL.md.

What does eda-drc do?

It runs ERC and DRC on a KiCad project, checks the results against your constraints and part stock, and writes docs/validation-report.md.

Which MCP servers does it need?

kicad-pcb to run DRC and read the design rules, and jlc for LCSC stock and pricing. Automated checks do not run without them.

Similar skills

All skills for Agent setup: memory, context, orchestration →

From the same set4

Project sponsors

Companies that keep this analytics open