Skip to main content
skill CX Codex

uloop-control-play-mode — Claude Code skill for Unity Play Mode

uloop-control-play-mode is a Claude Code skill that controls Unity Play Mode: start or stop sessions, pause, advance a frame, or inspect state. It checks runtime behavior.

MIT 1 installs ★ 602 updated 2026-10-29

Install into Claude Code · Skills CLI (Vercel) All methods and platforms ↓
npx skills add hatayama/unity-cli-loop --skill uloop-control-play-mode -a claude-code
Open on GitHub

What uloop-control-play-mode does

The skill runs uloop control-play-mode with actions such as Play, Stop, Pause, Step, and Status. A status check reads the current state without changing it. Step moves the running game forward by one frame and leaves it paused. The command returns JSON describing the state and action.

When Play starts from Edit Mode, --unsaved-changes determines how pending Scene or Prefab Stage edits are handled: keep them in memory, save them, or stop the request. Its default is keep. To test from a clean session, stop the current run first; calling Play while the Editor is already playing does not reset the session. Unity and the uloop command are required.

The response can report compile errors that would block starting Play Mode. Step requires Play Mode to be running, and --timeout-seconds can be increased for projects that take longer to enter Play Mode.

What it helps with

  • start Unity Play Mode to check runtime behavior
  • pause a game and advance it by one frame
  • read Play Mode state without changing it
  • stop an existing run before a clean test

Example prompts for the agent

  • Start Unity Play Mode and tell me whether the session began.
  • Pause Play Mode, then advance the game by one frame.
  • Check the current Play Mode state without changing anything.

How to install uloop-control-play-mode

1Skills CLI (Vercel)

npx skills add hatayama/unity-cli-loop --skill uloop-control-play-mode -a claude-code

2Manually: put the files in place

~/.claude/skills/uloop-control-play-mode/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/uloop-control-play-mode/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about uloop-control-play-mode

How do I install uloop-control-play-mode in Claude Code?

Run npx skills add hatayama/unity-cli-loop --skill uloop-control-play-mode -a claude-code. The skill file is located at ~/.claude/skills/uloop-control-play-mode/SKILL.md.

What does uloop-control-play-mode do?

It controls Unity Play Mode: start, stop, pause, or advance by one frame. Status reads the current state without side effects.

How are unsaved Scene edits handled when Play Mode starts?

Use --unsaved-changes to keep edits in memory, save them first, or abort the start. The default is keep, which does not rewrite Scene files on disk.

Source text

SKILL.md · MIT
---
name: uloop-control-play-mode
toolName: control-play-mode
description: "Control Unity Editor Play Mode. Use to Play (or Resume, its alias), Stop, Pause, or Step Play Mode, or query Status without side effects, for runtime behavior checks and frame inspection."
---

# uloop control-play-mode

Control Unity Editor play mode (play/stop/pause/step) or query its state without side effects (status).

## Usage

```bash
uloop control-play-mode [options]
```

## Parameters

| Parameter | Type | Default | Description |
|-----------|------|---------|-------------|
| `--action` | string | `Play` | `Play` - start Play Mode, `Stop` - stop Play Mode, `Pause` - pause Play Mode, `Step` - advance one frame while paused, `Status` - report current state without changing anything, `Resume` - alias of Play in every state, including starting Play Mode when stopped |
| `--timeout-seconds` | integer | `180` | Maximum seconds to wait for the requested play mode state |
| `--unsaved-changes` | string | `keep` | How `Play` from Edit Mode handles unsaved Scene/Prefab Stage changes: `keep` enters Play Mode without saving (like the Editor's Play button); `save` writes them first; `fail` stops if any exist |

## Output

Returns JSON with the current play mode state:

- `IsPlaying`: Whether Unity is currently in play mode
- `IsPaused`: Whether play mode is paused
- `Changed`: Whether the requested action changed the current play mode state
- `WasAlreadyStopped`: Whether `Stop` was requested while Play Mode was already stopped
- `ResumedFromPause`: Whether `Play` resumed a paused Play Mode session instead of starting a new one
- `Message`: Description of the action performed
- `Warning` (string, optional): Set when the action carries a caveat. With `--unsaved-changes save` it starts by listing every Scene and Prefab Stage it saved. A fresh `Play` start always notes that the session started from Edit-time scene state; additionally, when active hot-reload patches or enabled pause points exist and Domain Reload is enabled, it reports how many of them the Play-entry domain reload will discard. Pause points enabled with `--persist` are counted separately: they are re-armed after the reload, and the warning points at `pause-point-status` for the re-arm result. `Status` also reports when Play Mode is running while the Unity Editor is unfocused, because progress may be throttled; run `uloop focus-window`, or use the `pause-point --await`/`--trigger` flow instead of polling for progress.
- `StoppedBy` (string, optional): Why Play Mode last stopped: `cli-control-play-mode`, `cli-compile-stop-setting`, `cli-run-tests-cancel`, `script-compilation`, or `unknown`. Present on `Stop` when Play Mode was already stopped, and on `Status` when Play Mode is not running. Omitted when this Editor session has no confirmed stop.
- `StoppedAt` (string, optional): UTC ISO 8601 timestamp of that stop. Omitted together with `StoppedBy` when no stop is recorded.
- `ActiveScenario` (string, optional): Name of the active non-default Play Mode configuration (for example a Multiplayer Play Mode scenario). Omitted when the default configuration is active.

## Notes

- Stop on an already-stopped Editor sets `Changed: false`, `WasAlreadyStopped: true`
- `Play` on an Editor that is already playing is a no-op: it sets `Changed: false` and leaves the current session (its accumulated state, spawned objects, progress) untouched instead of restarting it. If you need a clean state for verification, explicitly `Stop` then `Play` rather than relying on `Play` alone to reset anything.
- `Play` while Play Mode is paused resumes the same session: it sets `Changed: true`, `ResumedFromPause: true`, and `Message: "Play mode resumed"` — the session is not restarted.
- `Resume` is an alias of `Play` and behaves identically in every state, including starting Play Mode when stopped.
- `Step` advances exactly one frame and leaves PlayMode paused (the Editor's Next Frame button); it is independent of `Time.timeScale` and requires PlayMode to be running
- The command waits for the requested state before returning. Increase `--timeout-seconds` for projects with slow PlayMode entry.
- Before relying on PlayMode behavior as verification evidence, check `uloop get-logs --log-type Error` for pre-existing errors. An error already present when PlayMode starts can otherwise be mistaken for one caused by the action under test.
- `Status` reads the current state with no side effects: `Changed` is always `false`, no waiting, no scene saving, and it is never rejected by compile errors. It reports whether compile errors would currently block `Play` (`BlockedByCompileErrors` with the `CompileErrors` list), read from the last compile result without triggering a new compile. It does not predict unsaved-changes blocking: `BlockedByUnsavedChanges` describes a `Play` request that `--unsaved-changes` stopped, and `Status` never checks.
- `--unsaved-changes` applies only when `Play` enters Play Mode from Edit Mode; resuming a paused session never saves or checks. With the default `keep`, unsaved edits stay in memory: Unity restores them when Play Mode ends, and Scene files on disk are not rewritten.
- `Play` fails immediately with a `CONTROL_PLAY_MODE_UNSAVED_CHANGES` error when `fail` finds unsaved changes, or when `save` cannot save them — most commonly an Untitled scene, which has no path to save to. The error message lists exactly which scenes or prefab stages blocked it; use `keep`, or save the Untitled scene to an explicit path (or discard the changes), then retry.
- `Play` and `Stop` follow the active Play Mode configuration like the Editor's Play button: with a Multiplayer Play Mode scenario selected they start and stop its Virtual Players too. To find and command Virtual Players, read [references/multiplayer-play-mode.md](references/multiplayer-play-mode.md).
- `Play` from Edit mode triggers a domain reload (unless Enter Play Mode Options disable it), which discards all active hot-reload patches and every enabled pause point; pause points enabled with `--persist` are then re-armed from their saved enable request. The response `Warning` reports the counts being dropped and, separately, how many re-arm. Edits that were only hot-reloaded are not part of the compiled assemblies, so the new session runs the last compiled code — run `uloop compile` before `Play` to keep them, or re-apply `uloop hot-reload` after Play Mode starts.

© hatayama · MIT · hatayama/unity-cli-loop

Similar skills

SKILL.md skills catalog →

From the same set3

Project sponsors

Companies that keep this analytics open