Skip to main content
skill CX Codex

trader-exit — Claude Code skill: what it does, how to install

trader-exit is a Claude Code skill that sets stops and profit targets before entering long day trades. Triggers automatically after trader-entry or on prompts like "where's my stop".

MIT ★ 9,067 updated 2026-10-20

Install into Claude Code · Plugin marketplace All methods and platforms ↓
/plugin marketplace add Jakeschincariol/day-trader-skill
/plugin install day-trader-skill@day-trader-skill
Open on GitHub

What trader-exit does

The skill executes exit.py to establish exit points before opening a trade. It extracts trade parameters from trader/entry.json or CLI flags, placing the stop at the opening-range midpoint by default and setting a 2R profit target. Users can configure alternative stops such as the range low, a fixed quote, a percentage drop, or an ATR multiple.

All verified figures are saved to trader/plan.json, which downstream tools use for position sizing, backtesting, and alerts. Calculating ATR stops requires session intraday bars, retrieved from the public Yahoo chart endpoint or supplied locally via --offline.

The tool operates exclusively on the long side. It rejects orders when the stop sits above entry, the target sits below, or total risk dips below 0.05% of share price. Overnight holds are blocked: positions must be flat by 15:55 New York time. The script never places live brokerage orders.

What it helps with

  • calculate stop-loss and profit target levels before trade execution
  • set stops via opening range midpoint, percentage, or ATR multiples
  • validate that trade risk is wide enough to survive market spread
  • export exit plans to trader/plan.json for position sizing tools

Example prompts for the agent

  • Plan the exit with a midpoint stop and 1R target: exit.py plan --stop or-mid --target 1R --write
  • exit.py plan --symbol TSLA --entry 364.18 --or-high 362.18 --or-low 354.47
  • Show current plan parameters from trader/plan.json

How to install trader-exit

1Plugin marketplace

/plugin marketplace add Jakeschincariol/day-trader-skill
/plugin install day-trader-skill@day-trader-skill

This installs the whole day-trader-skill plugin with all its skills

2Skills CLI (Vercel)

npx skills add Jakeschincariol/day-trader-skill --skill trader-exit -a claude-code

3Manually: put the files in place

~/.claude/skills/trader-exit/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/trader-exit/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about trader-exit

How to install trader-exit in Claude Code?

Run npx skills add Jakeschincariol/day-trader-skill --skill trader-exit -a claude-code in your terminal.

What does trader-exit do?

It calculates predefined stop-loss and target price points for long day-trading setups, enforcing risk thresholds and writing the result to trader/plan.json.

What is required to run trader-exit?

You need Python 3 on your system. If you select the ATR-based stop rule, internet access to Yahoo chart endpoints or a local JSON bar file via --offline is necessary.

Source text

SKILL.md · MIT
---
name: trader-exit
description: >-
  Exit Planner. Sets your stop and your target before you enter, so you know
  when to get out. Reads the entry from trader-entry (or a price you give),
  puts the stop at the opening-range midpoint by default (or the range low,
  your price, a percent, or a multiple of the ATR), rounds it down to the
  cent, and sets the target at 2R (or 1R, or your price). Refuses a stop at or
  above the entry, a target at or below it, or a stop too tight to survive the
  spread, and says why. Writes trader/plan.json for the Time Machine, the
  Budget Manager and Price Alerts. Long side only. Use when the user says
  "where's my stop", "set my stop and target", "plan the exit", "when do I get
  out", "stop loss", "what's my R", "risk reward", or right after
  /trader-entry triggers, before /trader-timemachine.
argument-hint: "[--stop or-mid|or-low|price:X|pct:X|atr:K] [--target 2R|1R|price:X]"
---

# trader-exit

The Exit Planner decides how a trade ends before it starts. The stop is where
the setup has failed. The target is where you take what you came for. Both
are set BEFORE the entry, written down and handed on, so nobody has to decide
anything in the middle of a fast move. A stop is a plan, not a guarantee: a
gap or a fast market can fill past it. Day trading loses most people money,
and a neat plan does not change that.

`${CLAUDE_SKILL_DIR}` below is this skill's folder (where this SKILL.md lives).

```bash
python3 "${CLAUDE_SKILL_DIR}/exit.py" plan                          # trader/entry.json: midpoint stop, 2R target
python3 "${CLAUDE_SKILL_DIR}/exit.py" plan --stop or-mid --target 1R --write
python3 "${CLAUDE_SKILL_DIR}/exit.py" plan --stop atr:1.5           # needs the session's bars (Yahoo or --offline)
python3 "${CLAUDE_SKILL_DIR}/exit.py" plan --symbol TSLA --entry 364.18 --or-high 362.18 --or-low 354.47
python3 "${CLAUDE_SKILL_DIR}/exit.py" show                          # the current trader/plan.json
```

Other flags: `--flat-by 15:55`, `--json`, `--now "2026-10-19 10:15"` (New
York time), `--entry PRICE` with a waiting entry.json to plan ahead, `--setup
level`, `--offline FILE` (a saved Yahoo chart JSON for an ATR stop).

## What it reads and writes

| file | what |
| --- | --- |
| `trader/entry.json` | the trigger from trader-entry: symbol, entry price, time, bar, opening range |
| `trader/config.json` | `flat_by` (15:55) and `min_reward_risk` (1.0: a note here, trader-risk enforces it) |
| Yahoo chart API | only for an `atr:K` stop: the session's bars up to the entry bar, free and unofficial |
| `trader/plan.json` | with `--write`: entry, stop and its rule, target and its R, risk a share, reward:risk, flat by. trader-timemachine, trader-budget and trader-alerts read it |

## Stops and targets

| stop | where it goes |
| --- | --- |
| `or-mid` | the opening-range midpoint (the default for an opening-range breakout) |
| `or-low` | the opening-range low: wider, so fewer shares for the same max loss |
| `price:X` | your price |
| `pct:X` | X percent under the entry |
| `atr:K` | K times the 14-bar ATR under the entry, on the session's bars up to the entry bar. With fewer than 14 bars by then it averages all of them and says so |

A level setup has no opening range to lean on, so it needs a stop you name.

- **Rounding.** The stop rounds AWAY from the entry to the cent (down, for a
  long). Risk = entry minus stop. Target = entry + R x risk, rounded half up
  to the cent. `2R` by default; `1R`, `1.5R` or `price:X` also work.
- **Refused, with the reason.** A stop at or above the entry. A target at or
  below it. A risk under 0.05% of the price: too tight to survive the
  spread, normal wiggle would stop you out. An entry.json that has not
  triggered (unless you give `--entry`). A short: v2 plans longs only.
- **Flat by.** 15:55 by default (or `flat_by` in the config). Out by then,
  win or lose, no overnight hold. On a 1:00 p.m. early close it moves up to
  12:55. An entry at or after the flat-by time is refused.

## Steps

1. Run it right after `/trader-entry` triggers. Before that, `--entry PRICE`
   plans ahead at the level you expect.
2. Use the default stop for an opening-range breakout unless the user names
   another. A level setup needs one: ask.
3. Run `exit.py plan --write`. Read back the entry, the stop and its rule,
   the target and its rule, the risk a share, reward:risk and flat by.
4. If it refuses, say the reason and the fix (a wider stop, a farther
   target). Never loosen anything on your own.
5. Say once that the stop is a plan, not a guarantee.
6. Hand off to `/trader-timemachine` to replay the plan, then `/trader-budget`
   to size it to the max loss per trade. Offer `/trader-alerts` for the stop,
   the target and the flat-by time. Claude can keep `entry.py watch` running
   in the background or on a `/loop` until a setup triggers, then come here.

## Example: the reel

TSLA, Monday 2026-10-19. The entry is 364.18 at 10:15 AM (the 10:10 bar,
bar 8) and the opening range is 354.47 to 362.18. `exit.py plan --stop
or-mid --target 1R --write`:

```
Exit plan: TSLA long, Mon 2026-10-19, opening-range breakout on 5-minute bars
  Entry         $364.18 at 10:15 AM (bar 8)
  Stop          $358.32  opening-range midpoint: ($362.18 + $354.47) / 2 = $358.325, rounded down
  Target        $370.04  1R (one times the risk)
  Risk a share  $5.86 (1.61% of the entry)
  Reward:risk   1.0
  Flat by       15:55 ET, win or lose: no overnight hold
```

The default 2R target would be 364.18 + 2 x 5.86 = 375.90. trader-budget then
sizes it: a $50 max loss per trade buys floor(50 / 5.86) = 8 shares.

## Rules

- The stop and the target are set before the entry, never after.
- Never move a stop further from the entry once the trade is on.
- Plain numbers only: entry, stop, target, risk a share, reward:risk. It
  never prints a P&L or a return.
- Nothing here promises winning trades or money. A 1R target is not a
  prediction that the price gets there.
- Long side only. v2 plans longs only.

## What it never does

It never places an order, never sizes a position, never widens a stop to
make a plan pass, and never calls a stop a guarantee.

## Safety

- Education and tooling, not financial advice. A PASS is a rules check, not a recommendation.
- Paper trading by default (`"paper": true`). Going live is the user's own decision, in their own config.
- Nothing in this pack places an order except trader-broker, and only when all three hold: trader-risk
  passed that exact order today, the user typed an explicit yes for that one order in the chat, and the
  user clicked Allow once on Claude's own card because the order tool is set to "Needs approval"
  (Customize > Connectors > tool permissions). Never set an order tool to "Always allow".
- No options, margin, short selling or leverage unless the config allows it and the user confirms.
- Broker keys live in environment variables or the Claude Desktop config, never in the chat.

© Jake Schincariol · MIT · Jakeschincariol/day-trader-skill

Similar skills

All skills for Finance and business →

From the same set12

The whole set →
day-trader-skill The day-trader-skill plugin for Claude Code runs eleven day trading tools including a chart scanner, news monitor, entry timer, and trade outcome simulator. ★ 9,067repo stars trader-news trader-news is a Claude Code skill that tracks stock headlines, 8-K filings, and price moves. It runs for ticker questions, morning briefs, and checks after /trader-scanner. CX Codex +1 ★ 9,067repo stars trader-analyst trader-analyst is a Claude Code skill that reads company filings directly from SEC EDGAR. It compares revenue, margins, and EPS year over year before earnings trades. CX Codex +1 ★ 9,067repo stars trader-pelosi trader-pelosi is a Claude Code skill that monitors stock trades disclosed by members of US Congress. It checks House Clerk PTR index files and extracts transactions from filed PDFs. CX Codex +1 ★ 9,067repo stars trader-entry trader-entry is a Claude Code skill that watches market bars and names an entry after a close above a level. It starts from requests to watch a ticker or check a breakout. CX Codex +1 ★ 9,067repo stars trader-alerts trader-alerts is a Claude Code skill that tracks stock prices, stop levels, and NYSE session times. Triggers when checking quotes, watching stops, or right after generating a trade plan. CX Codex +1 ★ 9,067repo stars trader-budget trader-budget is a Claude Code skill that sizes positions from a budget and per-trade loss limit. It runs on share-count requests or after trader-exit writes a plan. CX Codex +1 ★ 9,067repo stars trader-risk trader-risk is a Claude Code skill that inspects proposed orders against risk limits before passing them to the broker. It blocks entries lacking stops or exceeding daily loss caps. CX Codex +1 ★ 9,067repo stars

Project sponsors

Companies that keep this analytics open