Skip to main content
skill CX Codex

trader-risk · jakeschincariol — Claude Code skill: what it does, how to install

trader-risk is a Claude Code skill that inspects proposed orders against risk limits before passing them to the broker. It blocks entries lacking stops or exceeding daily loss caps.

MIT ★ 9,067 updated 2026-10-20

Install into Claude Code · Plugin marketplace All methods and platforms ↓
/plugin marketplace add Jakeschincariol/day-trader-skill
/plugin install day-trader-skill@day-trader-skill
Open on GitHub

What trader-risk does

The tool inspects orders in trader/orders.json against constraints defined in trader/config.json by executing check.py. It verifies required stop-loss levels, reward-to-risk ratios, position caps, and minimum cash buffers. Any violating order receives a final BLOCK verdict that prevents the trade from reaching the broker.

Market orders evaluate entry risk against fresh prices from trader/prices.json under 15 minutes old. The skill monitors trading windows using New York market hours while ignoring day limits for exit trades. Results and order fingerprints are recorded in trader/state/risk.json for broker verification.

What it helps with

  • validate proposed stock orders against account risk limits
  • block market entries submitted without a stop-loss price
  • prevent trades outside regular New York market hours
  • track cumulative daily losses against maximum loss thresholds

Example prompts for the agent

  • Run risk checks on the proposed trader/orders.json file
  • Check if the planned order breaks any portfolio loss rules
  • Review how much of today's risk limit has been consumed

How to install trader-risk

1Plugin marketplace

/plugin marketplace add Jakeschincariol/day-trader-skill
/plugin install day-trader-skill@day-trader-skill

This installs the whole day-trader-skill plugin with all its skills

2Skills CLI (Vercel)

npx skills add Jakeschincariol/day-trader-skill --skill trader-risk -a claude-code

3Manually: put the files in place

~/.claude/skills/trader-risk/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/trader-risk/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about trader-risk

How to install trader-risk in Claude Code?

First run /plugin marketplace add Jakeschincariol/day-trader-skill, then execute /plugin install day-trader-skill@day-trader-skill.

What does trader-risk do?

It checks planned trade batches against preset risk limits, including stop-loss requirements, position sizing, and daily loss caps. Orders that breach boundaries are stamped BLOCK and withheld from execution.

What is required to run trader-risk?

The skill requires Python 3 alongside trade configuration and state files located in the trader/ directory.

Source text

SKILL.md · MIT
---
name: trader-risk
description: >-
  Risk Manager. Checks every trade against your limits and stops anything
  over them, before it can reach the broker. For a day trade: a stop is
  required, the loss at the stop must fit your max loss per trade (measured
  from the higher of the plan's entry and a fresh price), reward:risk must
  meet your minimum, the day's total risk must fit your daily loss limit, no
  more than your trades per day, and no new entries outside your entry
  window or when the market is closed. It also keeps the basics: blocked
  tickers, order size, position cap, cash buffer, margin, short sales,
  options and crypto, malformed or bad bracket orders, duplicates and a daily
  order limit. Getting out is never blocked by a day limit. Prints PASS or
  BLOCK with the reason and records the verdicts so trader-broker only shows
  an order that passed. Use when the user says "check my order", "is this
  safe", "risk check", "does this break my rules", "can I take this trade",
  "how much have I risked today", or before /trader-broker, always.
argument-hint: "[path to orders.json]"
---

# trader-risk

The Risk Manager is the gate between a proposal and the broker. Every order
written by trader-budget or trader-broker's flatten passes through it. A
BLOCK is final for that order: it does not go to the user for a yes, and it
does not go to the broker. Most people who day trade lose money. These limits
keep each loss and each day's losses small. They do not make a trade win.

`${CLAUDE_SKILL_DIR}` below is this skill's folder (where this SKILL.md lives).

```bash
python3 "${CLAUDE_SKILL_DIR}/check.py"                           # trader/ files; writes trader/state/risk.json
python3 "${CLAUDE_SKILL_DIR}/check.py" --json
python3 "${CLAUDE_SKILL_DIR}/check.py" --no-write                # look without recording
python3 "${CLAUDE_SKILL_DIR}/check.py" --now "2026-10-19 10:15"  # pin the clock (New York time)
```

## What it reads and writes

| file | what |
| --- | --- |
| `trader/orders.json` | the proposed orders (trader-budget, or trader-broker's flatten) |
| `trader/config.json` | the limits (trader-budget ships `config.example.json`) |
| `trader/portfolio.json` | cash and holdings; if missing, a fresh account funded with the budget |
| `trader/prices.json` | a fresh price raises the entry it measures risk from; also values holdings |
| `trader/state/broker.json` | what was placed today: duplicates, trades per day, daily loss, day trades |
| `trader/state/risk.json` | the verdicts it writes, with a fingerprint of each exact order |

## Entries and exits

An **entry** opens or adds to a position: a buy, or a sell that would go
short. An **exit** only reduces what you already hold. Getting out must
always be possible, so an exit is checked for format, asset and short sales
only. Every other rule (day limits, entry window, loss, reward:risk, blocked
list, size, duplicates) turns into a warning for an exit, never a BLOCK.

## The checks

Orders are checked in file order, as if each passed order had filled, so a
batch that is fine order by order but breaks a limit together is caught.

| check | blocks when |
| --- | --- |
| format | no symbol, side not buy or sell, both or neither of qty and notional, a notional order that is not market + day (Alpaca's rule), a limit order with no limit price; a bracket that is not whole shares, not `day` or `gtc`, or misses its stop-loss or take-profit |
| asset | an option symbol while `allow_options` is false; crypto or anything that is not a US stock or ETF ticker |
| short | a sell of more than you hold (`allow_short` false) |
| blocked | (entries) the ticker is on the `blocked` list |
| size | (entries) under `min_order_usd` or over `max_order_usd` |
| position | (entries) the stock would be over `max_position_pct` of the account |
| cash | (entries) the buy would leave less than the cash buffer, or need margin |
| stop | (entries) no stop while `require_stop` is true (a bracket `stop_loss_stop_price`, or the order's plan stop); a stop on the wrong side of the entry |
| loss | (entries) qty x (entry minus stop) over `max_loss_per_trade_usd` |
| reward:risk | (entries) (target minus entry) / (entry minus stop) under `min_reward_risk` |
| daily loss | (entries) the max losses at the stops of today's entries, plus this one, over `max_daily_loss_usd` |
| trades | (entries) `max_trades_per_day` entries already placed today |
| window | (entries) before `no_entries_before` or after `no_entries_after`, or the market is closed |
| pdt | (entries, only with `pdt_guard` true) 3 day trades already in the last 5 business days |
| duplicate | (entries) the same symbol and side twice in one batch, or already placed today |
| daily limit | (entries) `max_orders_per_day` orders already placed today |

How the numbers work:

- **The entry it measures from**: the limit price for a limit order. For a
  market order, the HIGHER of the plan's entry and a fresh price from
  `trader/prices.json` (under 15 minutes old). A plan written at 10:15 cannot
  understate the risk at 10:55 after the price ran up. An older price is not
  used, and it says so.
- **Daily loss** counts the full max loss of every entry placed today, win or
  lose, as trader-broker logged it. Three full-size trades use up a $150 day.
- **The window** is New York time, worked out in the tool (daylight saving
  included), never from the computer's clock zone. Weekends and NYSE holidays
  are closed. On a 1:00 p.m. early close the window ends 3 hours earlier too.
  Set both `no_entries_*` to null to switch the window off.
- **pdt_guard** (off by default) counts a day trade as a symbol bought and
  sold on the same day in the log, plus any entry placed today (it is meant
  to be flat by the close). FINRA removed the $25,000 pattern-day-trader
  minimum (Regulatory Notice 26-10, effective June 4, 2026; firms may phase
  in until October 20, 2027), so some brokers still apply the old rule: turn
  `pdt_guard` on if yours does.

Warnings do not block, but say them to the user: a LIVE account, a number
sent as a number instead of a string, a stop that lives only in the plan and
not at the broker, a price too old to use, an early close today.

## Steps

1. If the price may have moved since the plan, refresh it first
   (trader-alerts: `alerts.py quote TSLA --write`).
2. Run `check.py`. Exit code 0 means every order passed, 1 means at least one
   was blocked.
3. Tell the user the result in plain words, order by order: the max loss at
   the stop, reward:risk, and how much of today's limits it uses. For a
   BLOCK, give the reason and the fix (fewer shares, a closer stop from
   trader-exit, wait for the window, or skip the trade). Never change a
   limit yourself.
4. If the order changes in any way, run the check again. trader-broker matches
   each order to its verdict by fingerprint, so an edited order is not ready
   until it passes again, and a verdict from yesterday does not count today.

## Example: the reel

The TSLA bracket from trader-budget at 10:15 AM on Monday 2026-10-19, on a
fresh $5,000 paper account with the example config:

```
PASS  #1 buy TSLA 8 shares, entry
          entry 364.18 (the plan's entry), stop 358.32, target 370.04: risk 5.86 a share
          max loss $46.88 (limit $50), reward:risk 1.00 (min 1)
          today before this: 0 of 3 trades, $0 of $150 daily loss

1 passed, 0 blocked at 2026-10-19 10:15 New York. Cash after the passed orders: $2,086.56 (paper account).
```

One more share and it is blocked:

```
BLOCK #1 buy TSLA 9 shares, entry
          entry 364.18 (the plan's entry), stop 358.32, target 370.04: risk 5.86 a share
          max loss $52.74 (limit $50), reward:risk 1.00 (min 1)
          today before this: 0 of 3 trades, $0 of $150 daily loss
        - loss: 9 shares x 5.86 risk a share = $52.74 at the stop, over your $50 max loss per trade
```

The same 8 shares checked at 10:55 with the real 10:52 quote (366.48) in
`trader/prices.json` are blocked twice: 8 x 8.16 = $65.28 at the stop, and
reward:risk 0.44. At 9:40 they are blocked by the window (no new entries
before 9:45). The 3:55 PM sell that closes the position passes, even though
it is after the 3:30 entry cutoff: it is an exit.

## Rules

- A PASS only means the order is allowed to be shown to the user. It is not a yes.
- Every number comes from the config, the order, the portfolio, the prices or the broker log.
- Free Yahoo prices are unofficial and can lag; the broker's price is the one that fills, and a
  stop can fill worse than its price in a fast market.

## What it never does

It never places an order, never edits an order to make it pass, never
loosens a limit, never blocks a sell that only gets the user out, and never
treats a PASS as the user's yes.

## Safety

- Education and tooling, not financial advice. A PASS is a rules check, not a recommendation.
- Paper trading by default (`"paper": true`). Going live is the user's own decision, in their own config.
- Nothing in this pack places an order except trader-broker, and only when all three hold: trader-risk
  passed that exact order today, the user typed an explicit yes for that one order in the chat, and the
  user clicked Allow once on Claude's own card because the order tool is set to "Needs approval"
  (Customize > Connectors > tool permissions). Never set an order tool to "Always allow".
- No options, margin, short selling or leverage unless the config allows it and the user confirms.
- Broker keys live in environment variables or the Claude Desktop config, never in the chat.

© Jake Schincariol · MIT · Jakeschincariol/day-trader-skill

Similar skills

All skills for Finance and business →

trader-risk by other authors comes first.

From the same set12

The whole set →
trader-exit trader-exit is a Claude Code skill that sets stops and profit targets before entering long day trades. Triggers automatically after trader-entry or on prompts like "where's my stop". CX Codex +1 ★ 9,067repo stars trader-pelosi trader-pelosi is a Claude Code skill that monitors stock trades disclosed by members of US Congress. It checks House Clerk PTR index files and extracts transactions from filed PDFs. CX Codex +1 ★ 9,067repo stars trader-entry trader-entry is a Claude Code skill that watches market bars and names an entry after a close above a level. It starts from requests to watch a ticker or check a breakout. CX Codex +1 ★ 9,067repo stars trader-alerts trader-alerts is a Claude Code skill that tracks stock prices, stop levels, and NYSE session times. Triggers when checking quotes, watching stops, or right after generating a trade plan. CX Codex +1 ★ 9,067repo stars trader-budget trader-budget is a Claude Code skill that sizes positions from a budget and per-trade loss limit. It runs on share-count requests or after trader-exit writes a plan. CX Codex +1 ★ 9,067repo stars trader-timemachine trader-timemachine is a Claude Code skill that replays a trade against 5-minute stock bars and prior setups. It runs before position sizing. CX Codex +1 ★ 9,067repo stars trader-scanner trader-scanner is a Claude Code skill that scans US stock charts for setups before the bell and intraday. It writes matched candidates to trader/watchlist.json. CX Codex +1 ★ 9,067repo stars trader-broker trader-broker is a Claude Code skill that sends approved orders to a broker after two user confirmations. It activates for buy, sell, and position-close requests. CX Codex +1 ★ 9,067repo stars

Project sponsors

Companies that keep this analytics open