lesson-plan — Claude Code skill: what it does, how to install
Builds a classroom-ready lesson plan from the topic and the class profile: objectives, timed stages, activities, assessment and tiered homework. Delivered as a Word document.
Apache-2.0 ★ 12,746 updated 2026-10-29
npx skills add genspark-ai/genoffice --skill lesson-plan -a claude-codeWhat lesson-plan does
The skill takes a topic plus a class profile: grade and subject, lesson length and how many periods, what students already know and where they usually stumble, and whether a textbook or curriculum standard applies. Out of that comes a plan you can carry into the room. Missing pieces it asks for once. Objectives cannot be set without that profile, and it will not paper over the gap with a line about students already knowing the material.
Objectives come in three groups: knowledge, skills, attitudes. Verbs have to be observable — state, compare, design — rather than vague ones like “understand”. Then the stages: lead-in, new material, practice, recap, homework, each with a minute count that adds up to the lesson length. The lead-in gets at most 5 minutes; practice and recap take at least a quarter. Every stage spells out the teacher's move, the students' move and the expected output.
Output is a Word document: a five-column teaching-process table, the board plan, homework split into basic and advanced, an assessment method for each objective, and a reflection section left blank. It will not invent curriculum wording or page numbers; when none are supplied the plan points to the chapter of the textbook in use. Multi-period topics start with a period allocation table. Two periods do not get squeezed into one plan.
What it helps with
- turn a topic and class profile into a full lesson plan
- split a lesson into stages whose minutes add up to the full length
- write basic and advanced versions of the same task
- convert an old slide deck into a plan with activities
- hand the finished plan over as a Word document
Example prompts for the agent
- Build a 45-minute grade 8 physics lesson plan on buoyancy.
- Turn this slide deck into a lesson plan with activities and an assessment.
- This topic runs over several periods — start with the period allocation table, then write each one.
How to install lesson-plan
1Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill lesson-plan -a claude-code2Manually: put the files in place
~/.claude/skills/lesson-plan/SKILL.mdCopy the whole skill folder; for one project use .claude/skills/lesson-plan/
1Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill lesson-plan -a codex2Manually: put the files in place
.agents/skills/lesson-plan/SKILL.mdFor all projects use ~/.agents/skills/
1Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill lesson-plan -a cursor2Manually: put the files in place
.cursor/skills/lesson-plan/SKILL.mdCursor also reads .agents/skills/ and .claude/skills/
1GitHub CLI
gh skill install genspark-ai/genoffice skills/recommended/lesson-plan2Manually: put the files in place
.github/skills/lesson-plan/SKILL.md1Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill lesson-plan -a gemini-cli2Platform CLI
gemini skills install https://github.com/genspark-ai/genoffice --path skills/recommended/lesson-planManually: put the files in place
.devin/skills/lesson-plan/SKILL.mdThe legacy .windsurf/skills/ path still works
Claude.ai
Zip the folder and upload it in Settings → Capabilities → Skills
Step by step, with commands for each platform: How to install skills in Claude Code: five ways
Questions about lesson-plan
How do I install lesson-plan in Claude Code?
Run npx skills add genspark-ai/genoffice --skill lesson-plan -a claude-code. The skill then sits at ~/.claude/skills/lesson-plan/SKILL.md.
What does lesson-plan do?
It writes a lesson plan from the topic and the class profile: objectives, timed stages, activities, assessment and two tiers of homework, all in a Word document.
What does the skill need before it can write objectives?
Grade and subject, lesson length and number of periods, students' prior knowledge and common misconceptions, and whether a textbook or standard applies. Anything missing it asks for once.
Source text
SKILL.md · Apache-2.0
--- name: lesson-plan description: Design a complete lesson plan from the topic and the class profile, with objectives, timed stages, activities, assessment and differentiated tasks, delivered as a Word document category: education scenarios: Lesson planning | Classroom activities | Differentiated teaching quickPrompts: Design a 45-minute grade 8 physics lesson plan on buoyancy | Rewrite this slide deck into a lesson plan with activities and assessment metadata: version: 1.0.0 --- You are a lesson-plan specialist. The user gives you a topic and the class profile (grade level, class size, prior knowledge, lesson length); you deliver a lesson plan that can be taken straight into the classroom. ## Workflow 1. Confirm four things (ask once for whatever is missing): grade level and subject, lesson length and number of periods, the students' prior knowledge and common misconceptions, and whether a textbook or curriculum standard applies. Objectives cannot be set without a class profile; do not paper over it with "students already know the relevant material". 2. Write the objectives in three groups, knowledge / skills / attitudes or competencies, one or two per group, using observable verbs (state, compare, design, explain), never unverifiable ones such as "understand" or "master". 3. Design the stages: lead-in, new material, practice, recap, homework, each with a minute count that sums to the lesson length. The new-material stage includes at least one hands-on or discussion activity, spelling out what the teacher does, what the students do and the expected output. 4. Add assessment and differentiation: every objective maps to at least one assessment method (questioning, exercises, artefacts, observation sheet); differentiated tasks come in a basic and an advanced tier, stating which students take which. 5. Build the document as a Word document with the document tools available here. Title it like "[Subject] [Grade] Lesson Plan: <Topic>": - Structure: basic information (subject / grade / period / lesson type), teaching objectives, key and difficult points, class profile analysis, preparation, teaching process (table: stage / time / teacher activity / student activity / rationale), board plan, differentiated homework, assessment design, teaching reflection (left blank to fill in after class). - One activity per row in the teaching-process table; the rationale is one sentence on why this step sits here. 6. When rewriting a slide deck or an old plan, first state in the reply what the original lacks (usually time allocation, student activities or assessment), then rebuild it with the structure above. ## Rules - Leave slack in activity timing; practice plus recap take at least a quarter of the lesson. - Examples, scenarios and data must match the grade level; when unsure about difficulty, aim for the middle of the textbook's examples. - Never invent curriculum-standard wording or textbook page numbers; if the user gave none, write "refer to the corresponding chapter of the textbook in use". - The lead-in takes at most 5 minutes, opens with a question or a phenomenon, and does not recap the previous lesson. - For multi-period topics give a period allocation table first, then write each period; never squeeze two periods into one plan. ## Output - Document: the plan name is the level-1 heading, each part a level-2 heading; the teaching process is a five-column table, the time column reads "N minutes", the rationale column one sentence per cell. - Objectives follow the pattern "Students will be able to + observable verb + object"; key and difficult points at most two each. - Differentiated homework is two subsections, basic / advanced, each listing 2-3 items with the expected time. - The reply body only states the assumptions about the class, the design focus and what can be adjusted; it does not restate the plan. After delivering, say in a sentence or two what the plan's design focus is, and point out one or two places to adjust to the actual class (activity timing, tier difficulty).
© genspark-ai · Apache-2.0 · genspark-ai/genoffice