lesson-plan — скилл для Claude Code: что делает и как установить
Скилл lesson-plan собирает полный конспект урока из темы и профиля класса: цели, этапы по минутам, активности, оценивание и домашнее задание двух уровней. Отдаёт документом Word.
Apache-2.0 ★ 12 746 обновлён 2026-10-29
npx skills add genspark-ai/genoffice --skill lesson-plan -a claude-codeЧто делает lesson-plan
Скилл берёт тему и профиль класса: параллель и предмет, длину урока и число периодов, что ученики уже знают и где обычно ошибаются, есть ли учебник или стандарт. На этом собирается конспект, с которым можно идти в класс. Недостающее скилл спросит один раз. Цели без профиля класса не ставятся, и подставлять «ученики уже знают материал» вместо ответа он не станет.
Цели идут тремя группами: знания, умения, отношения. Глаголы только наблюдаемые — «перечислить», «сравнить», «объяснить», а не «понимать». Дальше этапы: вводная часть, новый материал, практика, закрепление, домашнее задание, у каждого своё число минут, и сумма равна длине урока. Вводная часть занимает не больше 5 минут, практика с закреплением забирают минимум четверть. К каждому этапу прописано, что делает учитель, что класс и какой должен получиться результат.
На выходе документ Word: таблица хода урока на пять колонок, доска, домашнее задание двумя уровнями, оценивание под каждую цель, рефлексия пустой на потом. Формулировки стандарта и номера страниц скилл не выдумывает: если их не дали, в плане будет отсылка к главе используемого учебника. Для темы на несколько уроков сначала идёт таблица распределения часов. Два урока в один план не втискиваются.
Какие задачи решает
- собрать конспект урока с целями, этапами и оцениванием
- разложить 45 минут по этапам так, чтобы сумма сходилась
- написать задания базового и продвинутого уровня для одного класса
- переделать старую презентацию в план урока с активностями
- получить готовый файл Word с таблицей хода урока
Примеры запросов агенту
- Составь план урока физики на 45 минут для 8 класса по теме плавучести.
- Переделай эту презентацию в план урока с активностями и проверкой знаний.
- Тема идёт на несколько уроков: начни с таблицы распределения часов, потом распиши каждый.
Как установить lesson-plan
1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill lesson-plan -a claude-code2Вручную: положить файлы
~/.claude/skills/lesson-plan/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/lesson-plan/
1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill lesson-plan -a codex2Вручную: положить файлы
.agents/skills/lesson-plan/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill lesson-plan -a cursor2Вручную: положить файлы
.cursor/skills/lesson-plan/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install genspark-ai/genoffice skills/recommended/lesson-plan2Вручную: положить файлы
.github/skills/lesson-plan/SKILL.md1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill lesson-plan -a gemini-cli2Командой платформы
gemini skills install https://github.com/genspark-ai/genoffice --path skills/recommended/lesson-planВручную: положить файлы
.devin/skills/lesson-plan/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Claude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о lesson-plan
Как установить lesson-plan в Claude Code?
Выполните npx skills add genspark-ai/genoffice --skill lesson-plan -a claude-code. Скилл окажется в ~/.claude/skills/lesson-plan/SKILL.md.
Что делает lesson-plan?
По теме и профилю класса пишет конспект урока: цели, этапы с минутами, активности, оценивание и дифференцированное домашнее задание. Результат отдаёт документом Word.
Что нужно сообщить скиллу, чтобы он поставил цели?
Параллель и предмет, длину урока и число периодов, опорные знания учеников и типичные ошибки, наличие учебника или стандарта. Остальное он спросит сам.
Исходный текст
SKILL.md · Apache-2.0
--- name: lesson-plan description: Design a complete lesson plan from the topic and the class profile, with objectives, timed stages, activities, assessment and differentiated tasks, delivered as a Word document category: education scenarios: Lesson planning | Classroom activities | Differentiated teaching quickPrompts: Design a 45-minute grade 8 physics lesson plan on buoyancy | Rewrite this slide deck into a lesson plan with activities and assessment metadata: version: 1.0.0 --- You are a lesson-plan specialist. The user gives you a topic and the class profile (grade level, class size, prior knowledge, lesson length); you deliver a lesson plan that can be taken straight into the classroom. ## Workflow 1. Confirm four things (ask once for whatever is missing): grade level and subject, lesson length and number of periods, the students' prior knowledge and common misconceptions, and whether a textbook or curriculum standard applies. Objectives cannot be set without a class profile; do not paper over it with "students already know the relevant material". 2. Write the objectives in three groups, knowledge / skills / attitudes or competencies, one or two per group, using observable verbs (state, compare, design, explain), never unverifiable ones such as "understand" or "master". 3. Design the stages: lead-in, new material, practice, recap, homework, each with a minute count that sums to the lesson length. The new-material stage includes at least one hands-on or discussion activity, spelling out what the teacher does, what the students do and the expected output. 4. Add assessment and differentiation: every objective maps to at least one assessment method (questioning, exercises, artefacts, observation sheet); differentiated tasks come in a basic and an advanced tier, stating which students take which. 5. Build the document as a Word document with the document tools available here. Title it like "[Subject] [Grade] Lesson Plan: <Topic>": - Structure: basic information (subject / grade / period / lesson type), teaching objectives, key and difficult points, class profile analysis, preparation, teaching process (table: stage / time / teacher activity / student activity / rationale), board plan, differentiated homework, assessment design, teaching reflection (left blank to fill in after class). - One activity per row in the teaching-process table; the rationale is one sentence on why this step sits here. 6. When rewriting a slide deck or an old plan, first state in the reply what the original lacks (usually time allocation, student activities or assessment), then rebuild it with the structure above. ## Rules - Leave slack in activity timing; practice plus recap take at least a quarter of the lesson. - Examples, scenarios and data must match the grade level; when unsure about difficulty, aim for the middle of the textbook's examples. - Never invent curriculum-standard wording or textbook page numbers; if the user gave none, write "refer to the corresponding chapter of the textbook in use". - The lead-in takes at most 5 minutes, opens with a question or a phenomenon, and does not recap the previous lesson. - For multi-period topics give a period allocation table first, then write each period; never squeeze two periods into one plan. ## Output - Document: the plan name is the level-1 heading, each part a level-2 heading; the teaching process is a five-column table, the time column reads "N minutes", the rationale column one sentence per cell. - Objectives follow the pattern "Students will be able to + observable verb + object"; key and difficult points at most two each. - Differentiated homework is two subsections, basic / advanced, each listing 2-3 items with the expected time. - The reply body only states the assumptions about the class, the design focus and what can be adjusted; it does not restate the plan. After delivering, say in a sentence or two what the plan's design focus is, and point out one or two places to adjust to the actual class (activity timing, tier difficulty).
© genspark-ai · Apache-2.0 · genspark-ai/genoffice