Skip to main content
skill CX Codex official · Anthropic

k12-check-for-understanding — Claude Code skill: what it does, install

The k12-check-for-understanding Claude Code skill builds a math check for understanding around a topic or standard. It activates for requests to create a formative check or exit ticket.

Apache-2.0 ★ 635 updated 2026-10-14

Install into Claude Code · Plugin marketplace All methods and platforms ↓
/plugin marketplace add anthropics/k12-teacher-skills
/plugin install k12-education@k12-teacher-skills
Open on GitHub

What k12-check-for-understanding does

The skill creates 1–3 items focused on one learning component, plus a teacher guide. Distractors draw on documented student misconceptions, and the guide maps likely answers to a next instructional step. This is meant to reveal what students understand, not to score a quiz or practice set.

Before drafting items, it loads references/math.md. It asks about grade or standard only when the answer could change the check, then proposes a learning component and waits for the teacher to confirm it. After drafting, it checks whether multiple answer choices could be defended and whether each distractor follows from plausible student reasoning.

When Learning Commons KG tools are connected, the skill uses them before designing items; otherwise it works from its knowledge of the standard and adds a note to the teacher guide. If an artifact tool offers Slides, the skill creates a slide deck; otherwise it writes both files to $OUTPUT_DIR. The required math guidance is in references/math.md.

What it helps with

  • create a short math check for a standard
  • build distractors from documented student misconceptions
  • connect likely answers to the next teaching step
  • write an exit ticket before moving to another topic

Example prompts for the agent

  • Create a short check on fractions to see what students understand.
  • Draft a formative check for this standard with a teacher guide.
  • I need to see who understands ratios before moving on.

How to install k12-check-for-understanding

1Plugin marketplace

/plugin marketplace add anthropics/k12-teacher-skills
/plugin install k12-education@k12-teacher-skills

This installs the whole k12-education plugin with all its skills

2Skills CLI (Vercel)

npx skills add anthropics/k12-teacher-skills --skill k12-check-for-understanding -a claude-code

3Manually: put the files in place

~/.claude/skills/k12-check-for-understanding/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/k12-check-for-understanding/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about k12-check-for-understanding

How do I install k12-check-for-understanding in Claude Code?

Add the marketplace with /plugin marketplace add anthropics/k12-teacher-skills, then install the skill with /plugin install k12-education@k12-teacher-skills.

What does k12-check-for-understanding do?

It creates 1–3 items for a math topic or standard and a teacher guide connecting likely responses to next instructional steps. The check is designed to show understanding, not to score a test.

What does k12-check-for-understanding need to work?

It must read references/math.md to build the math items. Connected Learning Commons KG tools change how the standard is grounded, but the skill can also work without them.

Source text

SKILL.md · Apache-2.0
---
name: k12-check-for-understanding
description: >
  Creates a Check for Understanding (CFU) for a math topic or standard: 1–3 targeted formative items
  whose distractors come from documented student misconceptions, plus a teacher guide routing each
  likely response to a specific next instructional step. Load BEFORE asking any clarifying question
  about grade, standard, or topic. This skill is for math; for other subjects, help as you normally
  would and don't mention the skill to the user. Triggers on asks to create, write, generate, or
  design a check for understanding, formative check, quick check, or exit ticket for a math concept
  or standard, and on implicit signals like "I need to see who got it before I move on." Not a
  quiz, test, or practice set — a CFU is read for what it reveals, not scored, so a numbered quiz
  or a bare answer key is a different job. Does not create a lesson (k12-lesson-plan-creation,
  which brings its own exit ticket), tier one (k12-lesson-differentiation), or prepare a teacher to
  teach one (k12-lesson-prep).
license: "Copyright 2026 Anthropic, PBC · Copyright 2026 Learning Commons · SPDX-License-Identifier: Apache-2.0. Complete terms in LICENSE and NOTICE."
---

# K-12 Check for Understanding

1–3 formative items for a standard the teacher is about to teach or just taught: scoped to one
learning component within it, distractors drawn from documented student errors, plus a teacher guide
saying what each response reveals and what to do. A CFU is small on purpose — a five-minute read
of where a class is, not an assessment event. "The teacher" is the user you're talking with.

**Asset-based language everywhere**, in both files and every chat message. No "weak," "fragile,"
"can't," "behind," "deficient," "low," "struggling," "failing." Reframe with specificity, not
euphemism: not "fragile understanding of denominators" but "treats the denominator as a count of
parts rather than the size of each part."

---

## Keeping the teacher posted

Keep the teacher posted in a sentence or two as you go, in a teacher's words: the topic, the grade,
what students will be asked to do, what they're getting. The machinery in this document — steps,
lookups and connectors, learning components, the checks you run, file names and formats — stays
invisible; this applies to every message, progress notes included. "I'll ground this in the
standard and the common errors for it, then build the check and a guide for reading responses", not
"Reading the math build guidance required by Step 0."

---

## Step 0 — Route (silently)

**Subject.** Math — arithmetic, fractions, ratio and proportion, geometry, algebra, functions,
statistics and probability, calculus, CCSS-M codes → **read `references/math.md` NOW**. Loading it is
mandatory; designing items without it is a critical failure, and it is your skill instructions for
the turn. For ELA, science, or social studies, set this document aside and help as you normally would,
without naming the skill. If the subject is ambiguous, ask in Step 1.

**Connector.** Are Learning Commons KG tools (e.g. `find_standard_statement`) available? This decides
Step 2; the skill works fully without them.

---

## Step 1 — Clarify

At most one question, and only when the answer changes the items:

- **Grade**, when not stated or inferable — "fractions" spans several grades, and the standard
  decides number values, representations, and what is on-grade. Ask before Step 2.
- **Which standard**, when the topic maps to two plausible ones.

Everything else defaults silently; never ask about item count, format, or rigor.

---

## Step 2 — Ground in the standard

**Connected:** follow `references/learning-commons-kg.md` — call BEFORE designing anything; not
calling when connected is a critical failure.

**Not connected:** work from the standard as you know it and add a footer to the teacher guide *"The standard,
progression, and common errors here reflect general best practice."* with nothing
about what was or wasn't retrieved. Never invent KG citations or cite research you haven't seen.

---

## Step 3 — Select and confirm the learning-component focus

A standard holds several separable ideas; scoping to one gives more actionable signal.

1. Review **every** learning component returned in Step 2, if available.
2. Select the **most assessable** — a genuine decision point in student understanding, probeable with
   1–3 items, separating students at different levels of understanding.
3. **State the selection and rationale, then stop and ask.** What the component asks students to do
   in one plain sentence — a teacher's words, not the component's own wording — naming any constraint
   it carries; one line on why; one direct question. **Do not proceed to Step 4 until the teacher
   answers.**
4. **If the teacher redirects** — a different component, or more than one — their choice becomes the
   scope anchor. Restate it and its rationale in one line and scope every item to it.

Then say in a sentence or two what you're about to do (*"I'll pull the common errors research has
documented for this standard, then build the check and a guide for reading the responses"*) — teacher
language, no tool or file names.

---

## Step 4 — Build the check

Follow the subject file's build section: coherence-map analysis, documented errors prioritized
against the confirmed component, the misconception-to-stem map, item design by rigor, teacher-facing
notes.

**Data-use guardrail.** Curriculum guidance and misconception data inform item design and next-step
wording internally only. **No curriculum, publisher, or research-source attribution appears anywhere
in either file or in any chat message.** Write original items; never reproduce retrieved
student-facing text, contexts, or teacher notes verbatim.

---

## Step 5 — Output

In the turn Step 4 completes. Read `references/output.md` in full first. Then check whether your
artifact tool can create an artifact from a published type; if it can, look at its type list. Take
the first row that applies:

| What you have | Do |
|---|---|
| **Slides** is in the type list | Read `rendering/claude-artifact.md` and make the check that way |
| Slides isn't listed, or there is no such tool | Write both files to `$OUTPUT_DIR` |

---

## Step 6 — Verify

**Starts only once both files exist.** Do not open `references/verification.md` during Step 4 or 5:
it is a gate on the written artifact, not build guidance, and reading it early turns it back into a
checklist you tick against what you meant to write.

Now read it in full, read both files back from `$OUTPUT_DIR` (or the deck and the guide, on the
slides path), and run its two gates on every item —
whether more than one choice can be defended, and whether each distractor is a choice a real
student's reasoning reaches. Fix what they find and rewrite the files. **Delivering a check that
hasn't been through both gates is a critical failure.**

---

## Step 7 — Close

Ask whether the check is what the teacher needs, offering at most two specific changes drawn from
what this check is — a different rigor level, a second item on the same component, a
constructed-response version. Not "let me know if you want changes." If they take one up, make it,
rewrite both files, and ask again.

**Plain language.** Never mention formats, file names, templates, how the documents were made, or the
verification and what it changed: *"Here's the check and a guide for reading the responses"*, not
*"I've written two HTML files."*

---

## Cross-cutting checklist

- [ ] Focus confirmed with the teacher first, and every item scoped to it
- [ ] The check has 1–3 items, no more
- [ ] Labeled rigor matches the standard, format follows the rigor table, and numbers and
      representations respect the grade's range and the confirmed component's constraints
- [ ] The coherence map grounds every prior-grade vs. on-grade route
- [ ] One distractor is a prerequisite gap, one an on-grade confusion; no two rows route alike; every
      next step names a sub-skill, representation, or task type
- [ ] Every student-facing sentence sits inside its grade band (K–2 ~8 words, 3–5 ~12 with at most
      one subordinate clause, 6–8 ~15), counted on the written stems and choices
- [ ] Every figure carries `<title>`/`<desc>` with `role="img"` and `aria-labelledby` in both files;
      item text and choice order are identical between them
- [ ] The student file has only prompts and choices/response space plus the name/date line; neither
      file carries a provenance marker or names a source

© Anthropic · Apache-2.0 · anthropics/k12-teacher-skills

Similar skills

All skills for Writing and docs →

From the same set5

Project sponsors

Companies that keep this analytics open