ics-and-ot-passive-network-monitoring — Claude Code skill
ics-and-ot-passive-network-monitoring is a Claude Code skill for passive traffic inspection in OT and SCADA setups. It inspects Modbus, S7comm, and DNP3 exchanges without active device polling.
no license ★ 73 updated 2026-11-15
npx skills add W4L33Dx/Cyber-Monster --skill ics-and-ot-passive-network-monitoring -a claude-codeWhat ics-and-ot-passive-network-monitoring does
The skill designs passive detection logic for industrial networks across Purdue levels 0 through 3. It tracks baselines across endpoint pairs, mapping permitted function codes, register boundaries, and transmission cadences. Because active probing can disrupt sensitive control loops, packet collection relies entirely on SPAN ports or hardware taps.
Detection models evaluate commands against plant states such as startup, batch changes, and planned maintenance. PLC firmware uploads or unapproved engineering workstation MAC addresses trigger high-priority alerts. If a tap drops packets or lacks protocol support, the methodology marks the result as an unverified telemetry gap rather than safe traffic.
What it helps with
- allowlist function codes for Modbus, S7comm, and DNP3 traffic
- catch unauthorized ladder logic and firmware writes to PLCs
- flag rogue engineering workstations by MAC and IP addresses
- build communication baselines across industrial operational phases
Example prompts for the agent
- Generate passive detection rules for Modbus TCP function codes on Purdue level 1
- Help me establish an OT communication matrix for S7comm endpoints
- Identify unexpected PLC write commands in this industrial capture log
How to install ics-and-ot-passive-network-monitoring
1Skills CLI (Vercel)
npx skills add W4L33Dx/Cyber-Monster --skill ics-and-ot-passive-network-monitoring -a claude-code2Manually: put the files in place
~/.claude/skills/ics-and-ot-passive-network-monitoring/SKILL.mdCopy the whole skill folder; for one project use .claude/skills/ics-and-ot-passive-network-monitoring/
1Skills CLI (Vercel)
npx skills add W4L33Dx/Cyber-Monster --skill ics-and-ot-passive-network-monitoring -a codex2Manually: put the files in place
.agents/skills/ics-and-ot-passive-network-monitoring/SKILL.mdFor all projects use ~/.agents/skills/
1Skills CLI (Vercel)
npx skills add W4L33Dx/Cyber-Monster --skill ics-and-ot-passive-network-monitoring -a cursor2Manually: put the files in place
.cursor/skills/ics-and-ot-passive-network-monitoring/SKILL.mdCursor also reads .agents/skills/ and .claude/skills/
1GitHub CLI
gh skill install W4L33Dx/Cyber-Monster blue-team/detection-and-monitoring/ics-and-ot-passive-network-monitoring2Manually: put the files in place
.github/skills/ics-and-ot-passive-network-monitoring/SKILL.md1Skills CLI (Vercel)
npx skills add W4L33Dx/Cyber-Monster --skill ics-and-ot-passive-network-monitoring -a gemini-cli2Platform CLI
gemini skills install https://github.com/W4L33Dx/Cyber-Monster --path blue-team/detection-and-monitoring/ics-and-ot-passive-network-monitoringManually: put the files in place
.devin/skills/ics-and-ot-passive-network-monitoring/SKILL.mdThe legacy .windsurf/skills/ path still works
Claude.ai
Zip the folder and upload it in Settings → Capabilities → Skills
Step by step, with commands for each platform: How to install skills in Claude Code: five ways
Questions about ics-and-ot-passive-network-monitoring
How to install ics-and-ot-passive-network-monitoring in Claude Code?
Run npx skills add W4L33Dx/Cyber-Monster --skill ics-and-ot-passive-network-monitoring -a claude-code in your terminal.
What does ics-and-ot-passive-network-monitoring do?
It provides detection blueprints to monitor industrial control systems passively. The skill focuses on spotting unapproved function codes, configuration writes, and unknown engineering assets.
What is required for ics-and-ot-passive-network-monitoring?
It requires passive network access via SPAN ports or network taps, protocol parsers for OT traffic, and a baseline capturing every operational mode of the facility.