Skip to main content

Break-Even ROAS: Formula, Examples & Free Calculator

Our write-up of a story first reported by Voluum Blog

Break-Even ROAS: Formula, Examples & Free Calculator

A ROAS of 3.0 can lose money, and 1.5 can make it. The first campaign sells a product at a 25% margin and reports a ROAS of 3.0. The second runs a CPA offer that keeps 85 cents per payout dollar after reversals and fees, and reports 1.5. The first buyer is thinking about scaling, the second about pausing. It should be the other way around.

Formula and what goes in

Break-even ROAS is the return on ad spend at which a campaign earns exactly what it costs. Formula: 1 divided by your profit margin, written as a decimal. At a 40% margin, break-even ROAS is 2.5, so each dollar of ad spend must bring back $2.50 in revenue.

ROAS counts revenue, not profit. Revenue still has to cover the product, payout reversals, payment fees and taxes. There is no universal good ROAS: a merchant with a 50% margin breaks even at 2.0, while one with a 25% margin needs 4.0.

You need one input: your profit margin before ad spend. That is the share of each revenue dollar you keep after every cost except advertising. Margin formula: (revenue minus all costs except ad spend) ÷ revenue.

If each order brings $80 in revenue and $48 goes to product and shipping, your margin is $32 ÷ $80 = 0.40, so break-even is 1 ÷ 0.40 = 2.5.

What counts as a cost depends on your model. A merchant counts product cost, shipping, payment fees and refunds. An affiliate counts reversed conversions, tracker and tool fees, taxes and anything else paid per conversion. Leave ad spend out.

Examples for CPA, RevShare and your own product

Say the offer pays $45 per conversion. The network reverses 10% of conversions, and tracker and other costs take 5% of the payout. Of each $45 in reported payout you keep $40.50 after reversals, and $2.25 in costs leaves $38.25.

Your margin is $38.25 ÷ $45 = 0.85, so break-even is 1 ÷ 0.85, about 1.18. You can pay up to $38.25 in ads per conversion. A ROAS of 1.5 earns roughly $0.28 for every $1 of ad spend (1.5 × 0.85 minus 1).

On paper, break-even for a CPA offer is 1.0, because the payout is your revenue. Reversals and fees push it higher. If your reports count every conversion before reversals, the gap between 1.0 and 1.18 stays invisible until the payout arrives.

RevShare changes the question, because revenue arrives over weeks instead of at the click. Say you pay $50 in ads per first-time depositor, and costs take 5% of what you earn. Break-even is 1 ÷ 0.95, about 1.05.

Now say a typical player brings $18 of commission in the first 30 days, $36 by day 60 and $55 by day 90. Your ROAS is 0.36 at day 30, 0.72 at day 60 and 1.10 at day 90. The campaign crosses break-even near the end of month three.

Judge that campaign at day 7 against 1.05 and you will pause every RevShare campaign you run. Measure each cohort at the same age and match the time frame of your rules to the payback window.

A store selling its own product has the most cost lines to count. Say the average order is $80, product and shipping cost $48 per order, payment fees take 2.9% of the order value and 4% of orders are refunded or charged back.

After refunds you keep $76.80 per order. Payment fees take $2.32 and product and shipping take $48, which leaves $26.48. Your margin is $26.48 ÷ $80 = 0.331, so break-even is about 3.02. A ROAS of 3.0 sits just under it, and 3.5 earns about $0.16 for every $1 of ad spend.

How to set up ROAS in Voluum

Voluum does not ship a ready-made ROAS column, but you can add one in a minute with a custom column. Click Columns in your report, then Add custom column. Name the column ROAS, choose Decimal as the display format and build the formula Revenue ÷ Cost.

Now keep your break-even number next to it. If your break-even is 1.18, any campaign above that in the ROAS column is earning after your other costs, and any campaign below it is not.

Automizer rules are the next step. A rule checks a metric against a condition within a time frame, and rule conditions can use ROI. Convert your break-even into an ROI threshold: (break-even ROAS minus 1) × 100%. A break-even of 1.18 becomes an ROI of 18%.

Voluum tracks revenue and ad cost, but not your reversals, fees or product costs. That is why the threshold is not 0%. The extra 18 points are those other costs, built into the number.

A starting rule for a CPA campaign could look like this: condition — ROI is lower than 18% and conversions is higher than 20, so a handful of early clicks does not trigger it; time frame — 3 days, checked every 8 hours; action — alert, and add pause once you trust the threshold. For RevShare, stretch the time frame to match your payback window, for example 30 days.

What quietly moves your break-even number

Your break-even point is not a constant. A few things shift it without anyone touching the campaign.

Reversal and refund rates come first. A network that reverses 5% of conversions one month and 15% the next has just moved your break-even. Check the rate by network or offer, not only overall.

Costs that scale differently matter too. Percentage costs leave your margin alone when a payout changes, but fixed per-conversion costs do not. A $2 tool fee takes 4% of a $50 payout and 5% of a $40 one.

The attribution window also plays a part. A longer window credits more late conversions to the campaign, so reported ROAS rises while the traffic stays the same. Compare campaigns that use the same window.

The last one is currency. If you pay for traffic in one currency and earn in another, exchange rates move your margin.

TG X Copied

Project sponsors

Companies that keep this analytics open