Skip to main content
skill CX Codex

drone-inspection-specialist — Claude Code skill for drone CV inspection

drone-inspection-specialist — a skill for drone footage analysis: fire detection, roof and hail inspection, thermal checks, and 3D Gaussian Splatting reconstruction.

MIT 227 installs ★ 274 updated 2026-10-30

Install into Claude Code · Skills CLI (Vercel) All methods and platforms ↓
npx skills add curiositech/some_claude_skills --skill drone-inspection-specialist -a claude-code
Open on GitHub

What drone-inspection-specialist does

This skill reads drone and satellite data for infrastructure inspection. It fuses RGB and thermal feeds to spot fires, checks defensible space against CAL FIRE and NFPA 1144 zones, examines roofs after hail, and rebuilds scenes with 3D Gaussian Splatting.

A decision tree inside the skill routes flight control, SLAM and navigation requests to drone-cv-expert instead. Confidence tables set alert levels: thermal plus smoke is treated as 95% confirmed, thermal alone only 70%. Repair costs are tied to the roof material first — asphalt shingles run $5–10 per square foot, slate $20–40.

For reconstruction, the skill recommends pulling 2–3 frames per second at 80% overlap rather than every frame. More frames do not improve the output. It also distinguishes real hail from wear by the spatial pattern: true hail damage is randomly distributed, clustered dents point elsewhere.

What it helps with

  • flag fires by combining thermal and smoke signals
  • check defensible space zones for CAL FIRE compliance
  • separate hail impact from ordinary roof wear
  • build a 3D model from drone video for measurements
  • estimate repair cost from the roof material

Example prompts for the agent

  • Check these roof frames for hail damage and estimate severity
  • Calculate NDVI and fuel load for this property from satellite imagery
  • Rebuild this drone video as a 3D model and measure the roof area

How to install drone-inspection-specialist

1Skills CLI (Vercel)

npx skills add curiositech/some_claude_skills --skill drone-inspection-specialist -a claude-code

2Manually: put the files in place

~/.claude/skills/drone-inspection-specialist/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/drone-inspection-specialist/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about drone-inspection-specialist

How do I install drone-inspection-specialist in Claude Code?

Run npx skills add curiositech/some_claude_skills --skill drone-inspection-specialist -a claude-code, then open ~/.claude/skills/drone-inspection-specialist/SKILL.md.

What does drone-inspection-specialist do?

It inspects drone and satellite data for property assessment: fire detection from thermal and RGB feeds, roof and hail analysis, thermal surveys, and 3D Gaussian Splatting reconstruction.

How is it different from drone-cv-expert?

This skill handles inspection and assessment tasks. For flight control, SLAM and sensor fusion it explicitly redirects to drone-cv-expert.

Source text

SKILL.md · MIT
---
name: drone-inspection-specialist
description: Advanced CV for infrastructure inspection including forest fire detection, wildfire precondition assessment, roof inspection, hail damage analysis, thermal imaging, and 3D Gaussian Splatting
  reconstruction. Expert in multi-modal detection, insurance risk modeling, and reinsurance data pipelines. Activate on "fire detection", "wildfire risk", "roof inspection", "hail damage", "thermal analysis",
  "Gaussian Splatting", "3DGS", "insurance inspection", "defensible space", "property assessment", "catastrophe modeling", "NDVI", "fuel load". NOT for general drone flight control, SLAM, path planning,
  or sensor fusion (use drone-cv-expert), GPU shader development (use metal-shader-expert), or generic object detection without inspection context (use clip-aware-embeddings).
allowed-tools: Read,Write,Edit,Bash(python:*,pip:*),Grep,Glob,mcp__firecrawl__firecrawl_search,WebFetch,mcp__stability-ai__stability-ai-generate-image
metadata:
  category: AI & Machine Learning
  pairs-with:
  - skill: drone-cv-expert
    reason: Core drone navigation and CV
  - skill: clip-aware-embeddings
    reason: Semantic understanding of inspected areas
  tags:
  - inspection
  - fire-detection
  - thermal
  - gaussian-splatting
  - insurance
---

# Drone Inspection Specialist

Expert in drone-based infrastructure inspection with computer vision, thermal analysis, and 3D reconstruction for insurance, property assessment, and environmental monitoring.

## Decision Tree: When to Use This Skill

```
User mentions drones/UAV?
├─ YES → Is it about inspection or assessment of something?
│        ├─ Fire detection, smoke, thermal hotspots → THIS SKILL
│        ├─ Roof damage, hail, shingles → THIS SKILL
│        ├─ Property/insurance assessment → THIS SKILL
│        ├─ 3D reconstruction for measurement → THIS SKILL
│        ├─ Wildfire risk, defensible space → THIS SKILL
│        └─ NO (flight control, navigation, general CV) → drone-cv-expert
└─ NO → Is it about fire/roof/property assessment without drones?
        ├─ YES → Still use THIS SKILL (methods apply)
        └─ NO → Different skill needed
```

## Core Competencies

### Fire Detection & Wildfire Risk
- **Multi-Modal Detection**: RGB smoke + thermal hotspot fusion
- **Precondition Assessment**: NDVI, fuel load, vegetation density
- **Defensible Space**: CAL FIRE/NFPA 1144 compliance evaluation
- **Progression Tracking**: Spread rate, direction prediction

### Roof & Structural Inspection
- **Damage Detection**: Cracks, missing shingles, wear, ponding
- **Hail Analysis**: Impact pattern recognition, size estimation
- **Thermal Analysis**: Moisture detection, insulation gaps, HVAC leaks
- **Material Classification**: Asphalt, metal, tile, slate identification

### 3D Reconstruction (Gaussian Splatting)
- **Pipeline**: Video → COLMAP SfM → 3DGS training → Web viewer
- **Measurements**: Roof area, damage dimensions, property bounds
- **Change Detection**: Before/after comparison for claims

### Insurance & Reinsurance
- **Claim Packaging**: Documentation meeting industry standards
- **Risk Modeling**: Catastrophe models, loss distributions
- **Precondition Data**: Satellite + drone + ground integration

## Anti-Patterns to Avoid

### 1. "Single-Sensor Dependence"
**Wrong**: Using only RGB for fire detection.
**Right**: Multi-modal fusion (RGB + thermal) for high-confidence alerts.
| Detection Source | Confidence | Action |
|------------------|------------|--------|
| Thermal fire only | 70% | Alert + verify |
| RGB smoke only | 60% | Alert + investigate |
| Thermal + RGB | 95% | Confirmed fire |

### 2. "Ignoring Hail Pattern"
**Wrong**: Counting damage without analyzing spatial distribution.
**Right**: True hail damage has RANDOM distribution. Linear or clustered patterns indicate other causes (foot traffic, age).

### 3. "Thermal Temperature Trust"
**Wrong**: Using raw thermal values without calibration.
**Right**: Account for:
- Emissivity of materials (roof = 0.9-0.95)
- Atmospheric transmission (humidity, distance)
- Reflected temperature from surroundings
- Time of day (thermal lag)

### 4. "3DGS Frame Overload"
**Wrong**: Extracting every frame from drone video.
**Right**: Extract 2-3 fps with 80% overlap. More frames ≠ better reconstruction.
| Video FPS | Extract Rate | Result |
|-----------|--------------|--------|
| 30 | 30 (all) | Redundant, slow processing |
| 30 | 2-3 | Optimal quality/speed |
| 30 | 0.5 | Insufficient overlap |

### 5. "Insurance Claim Speculation"
**Wrong**: Estimating costs without material identification.
**Right**: Identify material → Apply correct cost matrix.
| Material | Repair $/sqft | Replace $/sqft |
|----------|--------------|----------------|
| Asphalt shingle | $5-10 | $3-7 |
| Metal | $10-15 | $8-14 |
| Tile | $12-20 | $10-18 |
| Slate | $20-40 | $15-30 |

### 6. "Defensible Space Zone Confusion"
**Wrong**: Treating all vegetation equally regardless of distance.
**Right**: CAL FIRE zones have different requirements:
| Zone | Distance | Requirement |
|------|----------|-------------|
| 0 | 0-5 ft | Ember-resistant (no combustibles) |
| 1 | 5-30 ft | Lean, clean, green (spaced trees) |
| 2 | 30-100 ft | Reduced fuel (selective thinning) |

## Data Collection Strategy

### Satellite Data (Regional Context)
- **Sentinel-2**: 10m resolution, NDVI, fuel moisture (SWIR bands)
- **Landsat-8**: 30m resolution, historical baseline, thermal band
- **Planet**: 3m resolution daily, change detection
- **Application**: Regional risk mapping, before/after events

### Drone Data (Property Detail)
- **RGB Mapping**: 2-5cm GSD, orthomosaic, 3D model
- **Thermal Survey**: Moisture detection, heat signatures
- **Close Inspection**: Damage documentation, detail photos
- **Application**: Individual property assessment

### Ground Truth
- **Slope Measurement**: GPS transects for topographic risk
- **Soil Sampling**: Moisture content for fire risk
- **Material Verification**: Confirm roof type
- **Application**: Calibration and validation

## Quick Reference Tables

### Fire Detection Confidence Levels
| Signal Combination | Confidence | Alert Priority |
|-------------------|------------|----------------|
| Thermal >150°C + Smoke | 95% | CRITICAL |
| Thermal fire model | 80% | HIGH |
| Hotspot >80°C | 70% | MEDIUM |
| Smoke only | 60% | MEDIUM |
| Hotspot 60-80°C | 50% | LOW |

### Roof Damage Severity
| Type | Low | Medium | High | Critical |
|------|-----|--------|------|----------|
| Missing shingle | - | - | Always | - |
| Crack | <1" | 1-3" | >3" | Multiple |
| Granule loss | <10% | 10-30% | >30% | - |
| Ponding | - | Small | Large | Active leak |

### Wildfire Risk Factors (Weighted)
| Factor | Weight | High Risk Indicators |
|--------|--------|---------------------|
| Defensible space | 20% | Non-compliant zones |
| Vegetation density | 20% | NDVI >0.6, high fuel load |
| Slope | 15% | >30% grade |
| Roof material | 10% | Wood shake, Class C |
| Structure spacing | 10% | <30ft between buildings |
| Access/egress | 10% | Single road, narrow |

### 3DGS Quality Settings
| Quality Level | Iterations | Time | Use Case |
|---------------|------------|------|----------|
| Preview | 7K | 5 min | Quick check |
| Standard | 30K | 30 min | General use |
| High | 50K | 60 min | Documentation |
| Inspection | 100K | 3 hrs | Damage measurement |

## Reference Files

Detailed implementations in `references/`:
- `fire-detection.md` - Multi-modal fire detection, thermal cameras, progression tracking
- `roof-inspection.md` - Damage detection, thermal analysis, material classification
- `insurance-risk-assessment.md` - Hail damage, wildfire risk, catastrophe modeling, reinsurance
- `gaussian-splatting-3d.md` - COLMAP pipeline, 3DGS training, inspection measurements

## Integration Points

- **drone-cv-expert**: Flight control, navigation, general CV algorithms
- **metal-shader-expert**: GPU-accelerated 3DGS rendering
- **collage-layout-expert**: Visual report composition
- **clip-aware-embeddings**: Material/damage classification assistance

## Insurance Workflow

```
1. Pre-Event Assessment (Underwriting)
   ├─ Satellite: Regional risk context
   ├─ Drone: Property-level risk factors
   └─ Output: Risk score, premium factors

2. Post-Event Inspection (Claims)
   ├─ Drone survey: Damage documentation
   ├─ 3DGS: Measurements, change detection
   └─ Output: Claim package, cost estimate

3. Portfolio Risk (Reinsurance)
   ├─ Aggregate: TIV, loss curves
   ├─ Model: AAL, PML, concentration
   └─ Output: Treaty pricing, structure
```

---

**Key Principle**: Inspection accuracy depends on multi-source data fusion. Single-sensor assessments miss critical context. Always correlate drone findings with satellite baseline and weather data for defensible conclusions.

© curiositech · MIT · curiositech/some_claude_skills

Similar skills

All skills for AI and ML →

From the same set180

The whole set →
diagramming-expert The diagramming-expert skill turns architectures, processes, and relationships into text diagrams. Use it when a system is easier to explain with boxes, lines, and arrows. CX Codex +1 232installs design-critic design-critic evaluates UI and component code across 6 weighted aesthetic dimensions. Generates structured review scores and actionable remix suggestions. CX Codex +1 230installs grief-companion grief-companion is a Claude Code skill for grief education, memorial writing, and practical tasks after a loss. It responds to requests about bereavement, remembrance, or handling affairs after a death. CX Codex +1 229installs crisis-detection-intervention-ai The crisis-detection-intervention-ai skill detects crisis signals in user text and routes them through a safer escalation flow. It fits support, recovery, and mental health apps. CX Codex +1 227installs drizzle-migrations drizzle-migrations — a skill for schema work with Drizzle ORM on SQLite: tables, columns, indexes, migration generation and applying them. Fits projects where schema changes need to stay repeatable. CX Codex +1 226installs seo-visibility-expert seo-visibility-expert configures technical SEO, llms.txt files for AI scrapers, and schema markup. Useful when preparing web projects for launch. CX Codex +1 224installs mcp-creator mcp-creator is a Claude Code skill for building MCP servers that connect agents to external services. It activates on requests to create or develop an MCP server. CX Codex +1 222installs chatbot-analytics chatbot-analytics adds conversation monitoring and token usage tracking for AI chats while respecting HIPAA constraints. CX Codex +1 221installs

Project sponsors

Companies that keep this analytics open