Skip to main content
skill CX Codex official · Anthropic

customize · anthropics/claude-for-legal, legal-builder-hub — Claude Code skill: profile edits and installation

customize — a Claude Code skill for editing a Legal Builder Hub profile. It responds to requests to change profile details, registries, update settings, or QA strictness.

Apache-2.0 ★ 10,060 updated 2026-10-23

Install into Claude Code · Plugin marketplace All methods and platforms ↓
/plugin marketplace add anthropics/claude-for-legal
/plugin install legal-builder-hub@claude-for-legal
Open on GitHub

What customize does

customize guides changes to a Legal Builder Hub profile one setting at a time, without repeating the initial interview or editing YAML by hand. It covers company and practice details, installed plugins and skills, watched registries, update behavior, QA checks, and integrations.

Before saving, it displays the current value, asks for a replacement, and describes the downstream effect. Shared company details go in company-profile.md and affect all 12 plugins. Profile sections cannot be deleted; a watched registry can be paused while keeping its install history and stopping update checks. If the configuration is missing or still has [PLACEHOLDER] values, run /legal-builder-hub:cold-start-interview first.

What it helps with

  • edit a practice profile without repeating setup
  • add or pause a watched registry
  • change update cadence and notification channel
  • adjust QA strictness before installing a skill

Example prompts for the agent

  • Change my practice profile to cover the areas used for recommendations.
  • Add a registry to the skill search list.
  • Switch updates to ask before applying them.

How to install customize

1Plugin marketplace

/plugin marketplace add anthropics/claude-for-legal
/plugin install legal-builder-hub@claude-for-legal

This installs the whole legal-builder-hub plugin with all its skills

2Skills CLI (Vercel)

npx skills add anthropics/claude-for-legal --skill customize -a claude-code

3Manually: put the files in place

~/.claude/skills/customize/SKILL.md

Copy the whole skill folder; for one project use .claude/skills/customize/

Step by step, with commands for each platform: How to install skills in Claude Code: five ways

Questions about customize

How do I install customize in Claude Code?

Add the marketplace with /plugin marketplace add anthropics/claude-for-legal, then install the plugin with /plugin install legal-builder-hub@claude-for-legal.

What does customize do?

It guides one-at-a-time edits to a Legal Builder Hub profile, such as changing watched registries or QA strictness. It shows the existing value and asks for the replacement before saving.

What does customize need to work?

Set up Legal Builder Hub first with /legal-builder-hub:cold-start-interview. customize cannot edit a profile if its configuration is missing or still contains [PLACEHOLDER] values.

Source text

SKILL.md · Apache-2.0
---
name: customize
description: >
  Guided customization of your Legal Builder Hub profile — change one thing
  without re-running the whole cold-start interview. Adjust practice profile,
  installed starter pack, watched registries, update preferences, or QA
  strictness. Use when the user says "change my [thing]", "add a registry",
  "update my profile", "edit my config", or "customize".
argument-hint: "[section name, or describe what you want to change]"
---

# /customize

## When this runs

The user typed `/legal-builder-hub:customize`. They want to change something
in their Builder Hub profile — a watched registry, update notification
preferences, a practice area for recommendations — without re-running the
whole cold-start interview and without hand-editing YAML.

## What to do

1. **Read the config.** Read
   `~/.claude/plugins/config/claude-for-legal/legal-builder-hub/CLAUDE.md`
   (and `~/.claude/plugins/config/claude-for-legal/company-profile.md` one
   level up). If the plugin config does not exist or still contains
   `[PLACEHOLDER]` values, say:

   > You haven't run setup yet. Run `/legal-builder-hub:cold-start-interview`
   > first — customize is for adjusting a profile you already have.

2. **Show the customizable map.** List what's in the profile, grouped, with a
   one-line summary of the current value:

   - **Company / who you are** — name, industry, jurisdictions, stage, practice
     setting *(shared across all 12 plugins — changes flow through
     `company-profile.md`)*
   - **Your practice profile** — practice areas in scope, used to recommend
     community skills
   - **Installed starter pack** — which plugins and skills are installed via
     the hub, with install source
   - **Watched registries** — GitHub repositories / URLs the hub pulls
     community skills from
   - **Update preferences** — check cadence (daily / weekly / on demand),
     notification channel (Slack / in-session), auto-update vs. prompt
   - **QA strictness** — how aggressively `/skills-qa` flags issues on a candidate
     skill before install (lenient / middle / strict), and which
     failure-mode checks are on
   - **Skill install defaults** — install scope (user / project), whether
     to run `/skills-qa` automatically before install
   - **Integrations** — Slack / document storage status, fallbacks

3. **Ask what they want to change.**

   > What would you like to adjust? Pick a section, or describe the change in
   > your own words.

4. **Make the change.** Show the current value, ask for the new value, explain
   what changes downstream, confirm, write it to the config.

   Examples:
   - *Adding a new watched registry:* "`/registry-browser` will search this registry
     alongside the existing ones. `/auto-updater` will check it on its next run."
   - *QA strictness strict → middle:* "`/skills-qa` will report the same findings
     but not block install on the medium band unless you confirm."
   - *Auto-update on → off:* "The hub will prompt you before applying
     updates instead of applying them automatically."

5. **For shared-profile changes** (company name, industry, jurisdictions,
   practice setting, stage): write to
   `~/.claude/plugins/config/claude-for-legal/company-profile.md` and note:

   > This change affects all 12 plugins — any plugin that reads your
   > jurisdiction footprint now sees [new value].

6. **Close.**

   > Done. Your next output will reflect the change. Anything else? You can
   > run `/legal-builder-hub:customize` anytime.

## Guardrails

- **Never delete a section.** If the user wants to "remove" a watched
  registry, offer to mark it `[Paused]` and explain that pausing keeps the
  install history but stops update checks.
- **Flag internal inconsistency.** If the change would make the profile
  inconsistent (e.g., auto-update on + QA strictness off; or practice
  profile that doesn't match any installed plugin), flag the tension.
- **Flag guardrail degradation.** The Legal Skill Design Framework checks
  (nine design parameters, three legal failure modes, trust-surface check)
  are what `/skills-qa` exists to run — turning them off defeats the point. If the
  user wants to lower strictness, recommend the middle band rather than
  disabling the check.
- **One change at a time.** Don't re-ask the whole interview.

© Anthropic · Apache-2.0 · anthropics/claude-for-legal

Similar skills

All skills for Agent setup: memory, context, orchestration →

customize by other authors comes first.

customize official anthropics customize — a skill to adapt the C/C++ vulnerability-finding pipeline to other languages, domains, and target shapes. Turns an opinionated demo into a template: swap the detector, prompts, and sandbox — and the pipeline hunts what you need. CX Codex +1 1,100installs customize official anthropics customize updates one part of an AI governance practice profile without repeating the cold-start interview. Use it for risk settings, escalation contacts, registry entries, or workspace paths. CX Codex +1 644installs customize nanocoai The customize skill guides changes to NanoClaw, from adding channels and integrations to adjusting triggers and agent behavior. It asks what you need before choosing where to make the change. CX Codex +1 ★ 31,137repo stars customize official Anthropic The customize Claude Code skill edits individual settings in a regulatory practice profile. It runs when someone asks to change watched regulators, a threshold, or another profile section. CX Codex +1 ★ 10,060repo stars customize official Anthropic The customize Claude Code skill edits a product counsel practice profile one section at a time. It activates when someone asks to update a profile, risk calibration, or review framework. CX Codex +1 ★ 10,060repo stars setup kirkchen setup initializes Beat in a repository, detects the stack, and configures testing frameworks. Runs during initial project onboarding or when updating Beat configuration. CX Codex +1 523installs bmad-customize bmad-code-org The bmad-customize Claude Code skill edits BMad overrides and document templates. It activates on requests to change an agent’s behavior, a workflow, or what a PRD contains. CX Codex +1 17,000installs conversation-archaeologist OneWave-AI conversation-archaeologist is a Claude Code skill that analyzes past Claude conversations to build a user profile. CX Codex +1 371installs dart-test-fundamentals kevmoo dart-test-fundamentals — a skill for Claude Code and Codex that enforces best practices for Dart's package:test. It structures test suites, configures dart_test.yaml, and handles teardowns. CX Codex +1 455installs nemotron-customize NVIDIA Nemotron Team nemotron-customize is a Claude Code skill that plans Nemotron customization workflows. It activates for requests to train, evaluate, convert, or otherwise configure Nemotron models. CX Codex +1 2,200installs jetson-customize-pcie Jetson Team jetson-customize-pcie configures individual PCIe controllers on a Jetson Thor or Orin custom carrier: enable, lane count, link speed. Changes land in a kernel-DT overlay. CX Codex +1 1,100installs

From the same set174

The whole set →
cold-start-interview The cold-start-interview Claude Code skill builds a litigation practice profile through an interview. Its questions change with the user's role and the side they represent. CX Codex +1 ★ 10,060repo stars docket-watcher docket-watcher — a subagent for Claude Code, Codex, and Cursor. Sweeps court dockets on a schedule, pulls filings, computes candidate deadlines, and writes status reports. CX Codex ★ 10,060repo stars customize The customize Claude Code skill updates a legal clinic profile on request, from its jurisdiction to practice templates and semester settings. It activates for requests to revise the config, add a practice area, or start a new semester. CX Codex +1 ★ 10,060repo stars cold-start-interview The cold-start-interview Claude Code skill records a law school clinic’s practice areas, jurisdiction, and supervision model. Run it for initial setup, a fresh configuration, or an integration check. CX Codex +1 ★ 10,060repo stars cold-start-interview The cold-start-interview Claude Code skill interviews users about their legal practice and suggests a starter set of skills. It runs during first-time setup or when someone asks how to get started. CX Codex +1 ★ 10,060repo stars registry-sync The registry-sync Claude Code subagent checks watched skill registries and sends a digest of changes. Run it with “sync registries,” “anything new,” or let it follow its schedule. CX Codex ★ 10,060repo stars customize The customize Claude Code skill edits a law student’s study profile one section at a time. It responds to requests to update classes, study preferences, or bar exam plans. CX Codex +1 ★ 10,060repo stars cold-start-interview The cold-start-interview Claude Code skill builds a law student’s study profile and gathers course materials. It starts during initial setup or when asked to get started. CX Codex +1 ★ 10,060repo stars

Project sponsors

Companies that keep this analytics open