blitz3d-decomp — Claude Code skill: decompile Blitz3D games
blitz3d-decomp — a Claude Code skill that turns Blitz3D game executables into readable Blitz source and guides ports to another engine. It activates when game code or animated .b3d models are needed.
MIT 430 installs ★ 9,829 updated 2026-10-25
npx skills add rehan-remade/universal-modder --skill blitz3d-decomp -a claude-codeWhat blitz3d-decomp does
The skill uses B3DDecomp to extract readable Blitz code from a Blitz3D game executable. It traces game values through the code, then guides a port that keeps the original operation order and game tick. Separate instructions and scripts cover animated .b3d models with bones and keyframes going into Roblox.
Building B3DDecomp requires the .NET 8 SDK. The tool launches Blitz3DDisasm by name, so the built files must be available on PATH. Games based on SCP: Containment Breach code also need fmod.decls. The skill stops at builds protected against decompilation and encrypted modules rather than bypassing those protections. Only code and assets the user has rights to may be published or uploaded; SCP: Containment Breach ports follow CC BY-SA 3.0.
What it helps with
- extract readable Blitz source from a game executable
- trace where game values are set and read
- port Blitz3D behaviour to another engine
- move an animated
.b3dmodel into Roblox - compare a port against values from the decompiled game
Example prompts for the agent
- Decompile my Blitz3D game and recover readable source code.
- Help port this Blitz3D game's behaviour to another engine.
- Move this animated
.b3dmodel into Roblox and compare it with the original game.
How to install blitz3d-decomp
1Skills CLI (Vercel)
npx skills add rehan-remade/universal-modder --skill blitz3d-decomp -a claude-code2Manually: put the files in place
~/.claude/skills/blitz3d-decomp/SKILL.mdCopy the whole skill folder; for one project use .claude/skills/blitz3d-decomp/
1Skills CLI (Vercel)
npx skills add rehan-remade/universal-modder --skill blitz3d-decomp -a codex2Manually: put the files in place
.agents/skills/blitz3d-decomp/SKILL.mdFor all projects use ~/.agents/skills/
1Skills CLI (Vercel)
npx skills add rehan-remade/universal-modder --skill blitz3d-decomp -a cursor2Manually: put the files in place
.cursor/skills/blitz3d-decomp/SKILL.mdCursor also reads .agents/skills/ and .claude/skills/
1GitHub CLI
gh skill install rehan-remade/universal-modder skills/blitz3d-decomp2Manually: put the files in place
.github/skills/blitz3d-decomp/SKILL.md1Skills CLI (Vercel)
npx skills add rehan-remade/universal-modder --skill blitz3d-decomp -a gemini-cli2Platform CLI
gemini skills install https://github.com/rehan-remade/universal-modder --path skills/blitz3d-decompManually: put the files in place
.devin/skills/blitz3d-decomp/SKILL.mdThe legacy .windsurf/skills/ path still works
Skills CLI (Vercel)
npx skills add rehan-remade/universal-modder --skill blitz3d-decomp -a opencodeClaude.ai
Zip the folder and upload it in Settings → Capabilities → Skills
Step by step, with commands for each platform: How to install skills in Claude Code: five ways
Questions about blitz3d-decomp
How do I install blitz3d-decomp in Claude Code?
Run npx skills add rehan-remade/universal-modder --skill blitz3d-decomp -a claude-code. The skill file is placed at ~/.claude/skills/blitz3d-decomp/SKILL.md.
What does blitz3d-decomp do?
It uses B3DDecomp to recover readable Blitz source from Blitz3D games, then guides ports of game behaviour or models to another engine. It also describes checking the port against measured values from the decompiled code.
What does blitz3d-decomp need to run?
Building B3DDecomp requires the .NET 8 SDK. B3DDecomp also needs its Blitz3DDisasm executable; games based on SCP: Containment Breach code require fmod.decls.
Source text
SKILL.md · MIT
--- name: blitz3d-decomp description: Decompile a Blitz3D game to readable Blitz source with B3DDecomp and port what it does to another engine. Covers SCP - Containment Breach-era and other .bb games, B3DDecomp, Blitz3D runtime behaviour (fixed tick, Animate, CurveValue, Euler angles, quaternions, Rnd), animated .b3d models (viewmodels with bones and keyframes) into Roblox, and where to stop (builds protected against decompiling, games and assets the user has no rights to). Use when a Blitz3D game's code or animated models are needed. --- # Blitz3D decompile and port Blitz3D games ship as one exe: the runtime in `.text` and the compiled game in a resource module that the runtime links at load. Ghidra on the exe shows only the runtime. The route that works: **B3DDecomp disassembles the module and decompiles it to Blitz source.** Then the source is the spec for the port, and the original game stays the oracle. Keep every disassembly and decompile outside any repo (convention: `~/<game>-decomp/`), and never publish them; the scripts here are fine to keep. Leave proprietary DLLs that forbid decompiling alone: their export names in the exe are enough. Journal in the mod's `MODLOG.md`. Read the source when there is one: SCP: Containment Breach (Regalis11/scpcb) and its Ultimate Edition Reborn fork (Jabka666/scpcb-ue-my) are open source under CC BY-SA 3.0. **What a port may use.** A port that re-expresses a game's logic, or converts its models, keyframes, textures or sounds, redistributes that game once it is published or uploaded (to Roblox too). Port only what the user has the rights to: their own game, or an openly licensed one on its terms (SCP: Containment Breach: credit it and keep the port under CC BY-SA 3.0, and check each asset's credits, since fan games mix licences). Anything else stays a private study: nothing from it is uploaded or published. ## 1. Tools - B3DDecomp (juanjp600/B3DDecomp, C#, GPL-3): clone outside the repo, then `dotnet build Blitz3DDecomp.sln -c Release`. It needs a .NET 8 SDK; a user-local one installs without admin (`dotnet-install.ps1 -Channel 8.0 -InstallDir <dir>`). Run with `DOTNET_ROLL_FORWARD=Major` and `bin/Release/net8.0` on `PATH`: the decompiler starts `Blitz3DDisasm` by name. - If one function aborts the whole run, apply [references/b3ddecomp-skip-failures.patch](references/b3ddecomp-skip-failures.patch) (`git apply`; made on commit 2b3148b): the decompiler then skips a function it can't finish, with a `step5 failed` line, instead of stopping. Done when `Blitz3DDecomp.exe` and `Blitz3DDisasm.exe` build. ## 2. Disassemble and decompile `Blitz3DDecomp.exe <copy of game.exe>` writes `<game>_disasm/` (Code/ per function, Type/, Strings.txt, BuiltIn/, Libs/, BuiltInSymbols.txt), then decompiles it to `<game>_decomp/`. Games built from SCP: Containment Breach's code need the game's `fmod.decls` as a second argument (B3DDecomp's README: the shipped decls drop a parameter from `FSOUND_Stream_Open`). When it still aborts, the exception names the construct. Never make a type setter silently ignore writes to get past one: the type propagation then loops forever with no output. **Protected builds: stop.** Some builds are protected against this step: a modified compiler and runtime hash every function, type and builtin name (B3DDecomp stops with `Unrecognized function: @_builtIn_f<garbled>`; SCP: Containment Breach 2's client is built this way), or the module is encrypted. Those are protections the developer added against decompiling. Don't reverse them: tell the user and stop (`skills/mod-any-game/references/safety.md`). Current B3DDecomp undoes one of them by itself, without saying so: an XOR on a `.b3dmod` section. List the exe's sections first (`objdump -h`, or any PE viewer) and stop if it has one. Done when `<game>_decomp/` holds `Main.bb`, `Functions/`, `Types/` and `Decls/` and the run prints at most a handful of `step5 failed` lines. ## 3. Find the system - Strings first: an asset path or sound the system loads (`grep -l StringConstant_<n> Code/*`). - Data-driven templates: the init function stores constants into a template per item. If the game has an addon/JSON loader, it names every field. Done when every number the port will use is traced to the line that sets it and the line that reads it. ## 4. Port Read [references/blitz-runtime.md](references/blitz-runtime.md) before writing port code: Blitz3D's clock, Animate, CurveValue, Euler angles, Rnd and entity calls behave in ways a straight transcription gets wrong. For animated `.b3d` models (viewmodels, rigs, keyframes) into Roblox, follow [references/b3d-to-roblox.md](references/b3d-to-roblox.md); its scripts are in `scripts/roblox/`. Port step for step: same order, same constants, same tick. Mark every deviation in a comment with the reason. The rights rule above covers the code as much as the models. ## 5. Verify against the oracle Measure the port against the decompiled numbers in the engine, not by eye: rates (shots per second at the fixed tick), durations (frames / speed / ticks per second), aim (the sight's dot on the screen centre), ammo on the server. Record each check and its result in the journal. Done when every ported behaviour has a measured number next to the decompiled one.
© rehan-remade · MIT · rehan-remade/universal-modder