blender-retopology-uv — Claude Code skill: what it does, install
The blender-retopology-uv Claude Code skill covers retopology and UV work in Blender 5.3. Use it to turn a sculpt or scan into a game mesh, or prepare UVs for texturing and baking.
MIT 603 installs ★ 2,624 updated 2026-11-13
npx skills add EL4CTEO/blender-skills --skill blender-retopology-uv -a claude-codeWhat blender-retopology-uv does
The skill explains automatic and manual retopology, edge flow for deforming models, and UV setup. Its automatic options are Quadriflow, Decimate, and planar; scripts/auto_retopo.py creates an object ending in _low and hides the source. Unwrap options include seam-based, Minimum Stretch, and Smart methods.
scripts/uv_pack.py and scripts/texel_density.py cover seam marking, pixel-margin packing, and texel-density measurement. The guidance also addresses lightmap UV2, UDIMs, and mirrored UVs. Apply the object scale before measuring density, or the result will be wrong. The execution model is in blender-core.
What it helps with
- turn a sculpt or scan into a low-poly game mesh
- choose a retopology method for organic or hard-surface geometry
- mark seams and pack UV islands with pixel margins
- measure and adjust a model's texel density
Example prompts for the agent
- Make a game mesh from
Sculptwithquadriflowand a target of 8000 triangles. - Unwrap this model by seams and pack its islands with a margin for a 2k texture.
- Measure this model's texel density at resolution 2048, then set it with
--set.
How to install blender-retopology-uv
1Skills CLI (Vercel)
npx skills add EL4CTEO/blender-skills --skill blender-retopology-uv -a claude-code2Manually: put the files in place
~/.claude/skills/blender-retopology-uv/SKILL.mdCopy the whole skill folder; for one project use .claude/skills/blender-retopology-uv/
1Skills CLI (Vercel)
npx skills add EL4CTEO/blender-skills --skill blender-retopology-uv -a codex2Manually: put the files in place
.agents/skills/blender-retopology-uv/SKILL.mdFor all projects use ~/.agents/skills/
1Skills CLI (Vercel)
npx skills add EL4CTEO/blender-skills --skill blender-retopology-uv -a cursor2Manually: put the files in place
.cursor/skills/blender-retopology-uv/SKILL.mdCursor also reads .agents/skills/ and .claude/skills/
1GitHub CLI
gh skill install EL4CTEO/blender-skills skills/blender-retopology-uv2Manually: put the files in place
.github/skills/blender-retopology-uv/SKILL.md1Skills CLI (Vercel)
npx skills add EL4CTEO/blender-skills --skill blender-retopology-uv -a gemini-cli2Platform CLI
gemini skills install https://github.com/EL4CTEO/blender-skills --path skills/blender-retopology-uvManually: put the files in place
.devin/skills/blender-retopology-uv/SKILL.mdThe legacy .windsurf/skills/ path still works
Skills CLI (Vercel)
npx skills add EL4CTEO/blender-skills --skill blender-retopology-uv -a opencodeClaude.ai
Zip the folder and upload it in Settings → Capabilities → Skills
Step by step, with commands for each platform: How to install skills in Claude Code: five ways
Questions about blender-retopology-uv
How do I install blender-retopology-uv in Claude Code?
Run npx skills add EL4CTEO/blender-skills --skill blender-retopology-uv -a claude-code. The skill file is at ~/.claude/skills/blender-retopology-uv/SKILL.md.
What does blender-retopology-uv do?
It provides guidance for retopology and UV work in Blender, from building a low-poly mesh to unwrapping, packing islands, and setting texel density.
What does blender-retopology-uv need to work?
The instructions target Blender 5.3. The skill's execution model is in blender-core.
Source text
SKILL.md · MIT
--- name: blender-retopology-uv description: Retopology and UVs in Blender 5.3 - auto retopo (Quadriflow, Decimate, planar), deformation edge flow, seams, unwrap (Angle Based, Minimum Stretch, Smart), pixel-margin packing, texel density measure/set, lightmap UV2, UDIMs, mirrored UVs. Use to turn sculpts/scans/AI meshes into game meshes or prep UVs for texturing/baking. license: MIT metadata: author: blender-agent-skills version: "1.2.0" --- # Retopology & UVs The execution model is in `blender-core`. ## Retopology **Automatic** (`scripts/auto_retopo.py -- --objects Sculpt --tris 8000 --method ...`) makes `<name>_low` and leaves the source hidden: | Method | Use for | Notes | |---|---|---| | `quadriflow` | organic props, static characters, scans | clean quads. Voxel-remeshes first so the input is manifold (retries on the source if that fails); UVs are lost (re-unwrap) | | `decimate` | background props, LODs, AI-generated meshes | keeps UVs/shape, gives triangles. Fast | | `planar` | hard-surface CAD/boolean results | dissolves flat areas; keeps seams/sharp/material/UV borders | **Manual** (hero characters, anything that deforms). Set up a new mesh object with a Shrinkwrap modifier (`PROJECT`, target = sculpt), snapping to `FACE_PROJECT` + `use_snap_project`, and the source in a different viewport color/x-ray. Clean loops with `mesh.relax_edge_loops` / `space_edge_loops_evenly` (LoopTools, built in since 5.3). Auto retopo isn't good enough for deforming hero meshes, because the edge flow below matters. ### Edge flow rules for deforming meshes - Concentric loops around the eyes and mouth (≥3 rings). The nasolabial loop flows from the nose wing to the mouth corner. - **3 loops** at every bending joint (elbow, knee, finger knuckles), plus a loop on each side to keep volume. The shoulder needs extra loops for raising the arm. - Keep poles (3/5-edge verts) out of bending areas. Put them on flat, stiff regions (chest, back of skull). - Distribute quads evenly, with density where deformation and silhouette need it. Use triangles only in hidden, non-deforming spots. - Character tri budgets in 2026: mobile 5–15k, Roblox body ≤ 10.7k total, console/PC third-person 30–80k, hero/cinematic 100k+. Check the target in `blender-game-optimization`. ## UVs 1. **Seams**: hide them (under arms, inner legs, back of the head, under parts), follow hard edges, cut cylinders on the back side. Rule for game meshes: every hard edge (>~60°, `sharp_edge`) **must** be a UV seam, or the normal map shows artifacts. `scripts/uv_pack.py --seams-from-sharp 60` does this. 2. **Unwrap**: `--method seams` (Angle Based with marked seams), `--method min_stretch` (SLIM, 4.3+, least distortion on organics), `--method smart` (hard-surface/auto, `--angle 66`). 3. **Straighten** rectangular islands (Follow Active Quads, live only) so trims and pixel grids line up. 4. **Average island scale + pack** with margin in pixels: 2k → 8 px, 4k → 16 px, mobile 1k → 4 px. `--shape CONCAVE` gives the tightest pack (slow headless). The default `AABB` is instant. 5. **Texel density** (`scripts/texel_density.py --res 2048`): keep `spread` ≤ 1.3 within an asset. Set it with `--set <px/m>`; if `fits_0_1` is false, change res or density. 6. QA: `blender-asset-qa` reports zero-area UV faces and overlap %. ### Texel density targets (px/m; studio baselines, not laws) | Context | px/m | |---|---| | First-person hero / weapons | 1024–2048 | | First-person environment | 512–1024 | | Third-person games | 512 (console/PC), 256 (mobile) | | Top-down / strategy | 128–256 | | Roblox | ~256–512 per texture: 5×5 studs → 256², 10×10 → 512², 20×20 → 1024² | Everything in the same scene should share one density. The exception is hero assets, kept within 2x. ## Special cases - **Mirrored/stacked UVs** save space but break unique bakes. Move the duplicate islands exactly +1 U (outside 0–1) during baking, then move them back. Their normal maps must be mirror-safe (tangent space handles it in engines with MikkTSpace). - **Lightmap UV2** (`--lightmap`, gives `UVMap_Lightmap`): no overlaps, every island inside 0–1, generous margin. Unreal/Unity can generate their own; ship one only if the engine pipeline wants it. Keep UV0 active for texturing. - **UDIMs** (film/hero): islands in tiles 1001+ (U offset 1 per tile). Texture node image `source="TILED"`. Game engines mostly don't support UDIMs. - **Trim sheets**: unwrap the strips, then scale/move the islands onto the trim rows (V positions from the trim layout). Islands may exceed 0–1 in U for tiling. - **Roblox**: exactly one UV set, all inside 0–1. Overlaps are allowed. ## Gotchas - 5.0+: UV selection is shared across UV maps (`.uv_select_*` attributes). Old `BMLoopUV.select` code fails. - `uv.*` operators run in Edit Mode and act on selected faces. Select everything first (scripts handle this). - Headless `uv.pack_islands` with `CONCAVE`/`CONVEX` + rotation can take 2–25 s even on tiny meshes. Use `AABB` while iterating. - Unwrap warning "failed to solve island": the island has no seams (closed shape). Add seams. - Apply scale before measuring texel density, or the density reads wrong (the scripts use world space and already account for scale).
© blender-agent-skills · MIT · EL4CTEO/blender-skills