Skip to main content
command CX Codex

rclone_serve_webdav — Claude Code command and how to install

rclone_serve_webdav starts a WebDAV server for remote:path through rclone. Useful when a remote needs to open in a browser, a WebDAV client or another rclone.

MIT ★ 50,109 updated 2026-10-24

Install into Claude Code · Plugin marketplace All methods and platforms ↓
/plugin marketplace add sickn33/agentic-awesome-skills
/plugin install agentic-awesome-skills@agentic-awesome-skills
Open on GitHub

What rclone_serve_webdav does

This command runs rclone serve webdav against a remote:path and exposes that location over HTTP as a WebDAV share. You can browse it in a web browser, connect from any WebDAV client, or add it to rclone as a WebDAV remote.

--addr sets the address, port or unix socket and can be repeated. --baseurl puts the server under a URL prefix, which helps behind a proxy. --cert and --key switch on HTTPS, and --client-ca adds client certificate checks. --etag-hash changes how ETags are built: by default they come from modification time and size, while auto picks the first hash the backend supports. systemd socket activation and a custom page template via --template are also supported.

The server listens on localhost only unless you say otherwise. Bind --addr to a public or LAN address and the docs advise turning on authentication. Keep the Windows WebClient and Office block on Basic auth over plain HTTP, and use HTTPS with a certificate the client trusts. The unix socket example has no authentication, so put the socket in a private directory.

What it helps with

  • share a cloud remote folder over WebDAV on a local network
  • browse remote contents in a web browser without a separate client
  • serve WebDAV over HTTPS with --cert and --key
  • put rclone behind a proxy under a --baseurl prefix
  • start WebDAV on the first connection via a systemd socket

Example prompts for the agent

  • Start a WebDAV server for remote:path with the rclone_serve_webdav command
  • Use rclone_serve_webdav to serve remote:backup over HTTPS with --cert and --key
  • Run rclone_serve_webdav on the unix socket /tmp/my.socket

How to install rclone_serve_webdav

1Plugin marketplace

/plugin marketplace add sickn33/agentic-awesome-skills
/plugin install agentic-awesome-skills@agentic-awesome-skills

2Manually: put the files in place

.claude/commands/rclone_serve_webdav.md

Call it with /rclone_serve_webdav. For all projects use ~/.claude/commands/

Questions about rclone_serve_webdav

How do I install rclone_serve_webdav in Claude Code?

Run /plugin marketplace add sickn33/agentic-awesome-skills, then /plugin install agentic-awesome-skills@agentic-awesome-skills.

What does rclone_serve_webdav do?

It runs rclone serve webdav and publishes remote:path over the WebDAV protocol. You can open the result in a browser or a WebDAV client, or add it to rclone as a remote.

Which address does the server listen on by default?

Localhost only. --addr changes it, for instance --addr :8080 for all IPs. On a public or LAN address the docs advise enabling authentication.

Source text

rclone_serve_webdav.md · MIT
---
title: "rclone serve webdav"
description: "Serve remote:path over WebDAV."
versionIntroduced: v1.39
# autogenerated - DO NOT EDIT, instead edit the source code in cmd/serve/webdav/ and as part of making a release run "make commanddocs"
---

> **Official documentation:** [https://rclone.org/commands/rclone_serve_webdav/](https://rclone.org/commands/rclone_serve_webdav/)
# rclone serve webdav

Serve remote:path over WebDAV.

## Synopsis

Run a basic WebDAV server to serve a remote over HTTP via the
WebDAV protocol. This can be viewed with a WebDAV client, through a web
browser, or you can make a remote of type WebDAV to read and write it.

## WebDAV options

### --etag-hash

This controls the ETag header.  Without this flag the ETag will be
based on the ModTime and Size of the object.

If this flag is set to "auto" then rclone will choose the first
supported hash on the backend or you can use a named hash such as
"MD5" or "SHA-1". Use the [hashsum](/commands/rclone_hashsum/) command
to see the full list.

## Access WebDAV on Windows and Office

Use an HTTPS endpoint with a certificate trusted by the client for Basic
authentication. Keep Windows WebClient and Office restrictions against Basic
authentication over plaintext HTTP enabled; do not set registry values to allow
non-TLS authentication as a routine compatibility workaround.

If transfers exceed a client limit, inspect the relevant WebClient setting and
restart that service only after assessing the system-wide effect.

## Serving over a unix socket

You can serve the webdav on a unix socket like this:

```console
rclone serve webdav --addr unix:///tmp/my.socket remote:path
```

and connect to it like this using rclone and the webdav backend:

```console
rclone --webdav-unix-socket /tmp/my.socket --webdav-url http://localhost lsf :webdav:
```

This example configures no HTTP authentication. Create the socket in a private
directory with restrictive permissions, or explicitly configure authentication;
HTTP itself can authenticate and using a Unix socket does not add it.

## Server options

Use `--addr` to specify which IP address and port the server should
listen on, eg `--addr 1.2.3.4:8000` or `--addr :8080` to listen to all
IPs.  By default it only listens on localhost.  You can use port
:0 to let the OS choose an available port.

If you set `--addr` to listen on a public or LAN accessible IP address
then using Authentication is advised - see the next section for info.

You can use a unix socket by setting the url to `unix:///path/to/socket`
or just by using an absolute path name.

`--addr` may be repeated to listen on multiple IPs/ports/sockets.
Socket activation, described further below, can also be used to accomplish the same.

`--server-read-timeout` and `--server-write-timeout` can be used to
control the timeouts on the server.  Note that this is the total time
for a transfer.

`--max-header-bytes` controls the maximum number of bytes the server will
accept in the HTTP header.

`--baseurl` controls the URL prefix that rclone serves from.  By default
rclone will serve from the root.  If you used `--baseurl "/rclone"` then
rclone would serve from a URL starting with "/rclone/".  This is
useful if you wish to proxy rclone serve.  Rclone automatically
inserts leading and trailing "/" on `--baseurl`, so `--baseurl "rclone"`,
`--baseurl "/rclone"` and `--baseurl "/rclone/"` are all treated
identically.

`--disable-zip` may be set to disable the zipping download option.

### TLS (SSL)

By default this will serve over http.  If you want you can serve over
https.  You will need to supply the `--cert` and `--key` flags.
If you wish to do client side certificate validation then you will need to
supply `--client-ca` also.

`--cert` must be set to the path of a file containing
either a PEM encoded certificate, or a concatenation of that with the CA
certificate. `--key` must be set to the path of a file
with the PEM encoded private key. If setting `--client-ca`,
it should be set to the path of a file with PEM encoded client certificate
authority certificates.

`--min-tls-version` is minimum TLS version that is acceptable. Valid
values are "tls1.0", "tls1.1", "tls1.2" and "tls1.3" (default "tls1.0").

## Socket activation

Instead of the listening addresses specified above, rclone will listen to all
FDs passed by the service manager, if any (and ignore any arguments passed
by `--addr`).

This allows rclone to be a socket-activated service.
It can be configured with .socket and .service unit files as described in
<https://www.freedesktop.org/software/systemd/man/latest/systemd.socket.html>.

Socket activation can be tested ad-hoc with the `systemd-socket-activate`command

```console
systemd-socket-activate -l 127.0.0.1:8000 -- rclone serve webdav remote:path
```

This will socket-activate rclone on the first connection to port 8000 over TCP.

### Template

`--template` allows a user to specify a custom markup template for HTTP
and WebDAV serve functions.  The server exports the following markup
to be used within the template to server pages:

| Parameter   | Subparameter | Description |
| :---------- | :----------- | :---------- |
| .Name       |              | The full path of a file/directory. |
| .Title      |              | Directory listing of '.Name'. |
| .Sort       |              | The current sort used. This is changeable via '?sort=' parameter. Possible values: namedirfirst, name, size, time (default namedirfirst). |
| .Order      |              | The current ordering used. This is changeable via '?order=' parameter. Possible values: asc, desc (default asc). |
| .Query      |              | Currently unused. |
| .Breadcrumb |              | Allows for creating a relative navigation. |
|             | .Link        | The link of the Text relative to the root. |
|             | .Text        | The Name of the directory. |
| .Entries    |              | Information about a specific file/directory. |
|             | .URL         | The url of an entry. |
|             | .Leaf        | Currently same as '.URL' but intended to be just the name. |
|             | .IsDir       | Boolean for if an entry is a directory or not. |
|             | .Size        | Size in bytes of the entry. |
|             | .ModTime     | The UTC timestamp of an entry. |

The server also makes the following functions available so that they can be used
within the template. These functions help extend the options for dynamic
rendering of HTML. They can be used to render HTML based on specific conditions.

| Function   | Description |
| :---------- | :---------- |
| afterEpoch  | Returns the time since the epoch for the given time. |
| contains    | Checks whether a given substring is present or not in a given string. |
| hasPrefix   | Checks whether the given string begins with the specified prefix. |
| hasSuffix   | Checks whether the given string end with the specified suffix. |

### Authentication

By default this will serve files without needing a login.

You can either use an htpasswd file which can take lots of users, or
set a single username and password with the `--user` and `--pass` flags.

Alternatively, you can have the reverse proxy manage authentication and use the
username provided in the configured header with `--user-from-header`  (e.g., `--user-from-header=x-remote-user`).
Ensure the proxy is trusted and headers cannot be spoofed, as misconfiguration
may lead to unauthorized access.

If either of the above authentication methods is not configured and client
certificates are required by the `--client-ca` flag passed to the server, the
client certificate common name will be considered as the username.

Use `--htpasswd /path/to/htpasswd` to provide an htpasswd file.  This is
in standard apache format and supports MD5, SHA1 and BCrypt for basic
authentication.  Bcrypt is recommended.

To create an htpasswd file:

```console
touch htpasswd
htpasswd -B htpasswd user
htpasswd -B htpasswd anotherUser
```

The password file can be updated while rclone is running.

Use `--realm` to set the authentication realm.

Use `--salt` to change the password hashing salt from the default.

## VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk
filing system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the
VFS layer has to deal with that. Because there is no one right way of
doing this there are various options explained below.

The VFS layer also implements a directory cache - this caches info
about files and directories (but not the data) in memory.

## VFS Directory Cache

Using the `--dir-cache-time` flag, you can control how long a
directory should be considered up to date and not refreshed from the
backend. Changes made through the VFS will appear immediately or
invalidate the cache.

```text
    --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
    --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)
```

However, changes made directly on the cloud storage by the web
interface or a different copy of rclone will only be picked up once
the directory cache expires if the backend configured does not support
polling for changes. If the backend supports polling, changes will be
picked up within the polling interval.

You can send a `SIGHUP` signal to rclone for it to flush all
directory caches, regardless of how old they are.  Assuming only one
rclone instance is running, you can reset the cache like this:

```console
kill -SIGHUP $(pidof rclone)
```

If you configure rclone with a [remote control](/rc) then you can use
rclone rc to flush the whole directory cache:

```console
rclone rc vfs/forget
```

Or individual files or directories:

```console
rclone rc vfs/forget file=path/to/file dir=path/to/dir
```

## VFS File Buffering

The `--buffer-size` flag determines the amount of memory,
that will be used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file.  The
buffer will only use memory for data that is downloaded but not not
yet read. If the buffer is empty, only a small amount of memory will
be used.

The maximum memory used by rclone for buffering can be up to
`--buffer-size * open files`.

## VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file.  See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

```text
    --cache-dir string                     Directory rclone will use for caching.
    --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
    --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
    --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
    --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
    --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
    --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)
```

If run with `-vv` rclone will print the location of the file cache.  The
files are stored in the user cache file area which is OS dependent but
can be controlled with `--cache-dir` or setting the appropriate
environment variable.

The cache has 4 different modes selected by `--vfs-cache-mode`.
The higher the cache mode the more compatible rclone becomes at the
cost of using disk space.

Note that files are written back to the remote only when they are
closed and if they haven't been accessed for `--vfs-write-back`
seconds. If rclone is quit or dies with files that haven't been
uploaded, rclone can retry them on restart with the same remote and cache
settings, provided the persistent cache and metadata remain intact.

If using `--vfs-cache-max-size` or `--vfs-cache-min-free-space` note
that the cache may exceed these quotas for two reasons. Firstly
because it is only checked every `--vfs-cache-poll-interval`. Secondly
because open files cannot be evicted from the cache. When
`--vfs-cache-max-size` or `--vfs-cache-min-free-space` is exceeded,
rclone will attempt to evict the least accessed files from the cache
first. rclone will start with files that haven't been accessed for the
longest. This cache flushing strategy is efficient and more relevant
files are likely to remain cached.

The `--vfs-cache-max-age` will evict files from the cache
after the set time since last access has passed. The default value of
1 hour will start evicting files from cache that haven't been accessed
for 1 hour. When a cached file is accessed the 1 hour timer is reset to 0
and will wait for 1 more hour before evicting. Specify the time with
standard notation, s, m, h, d, w .

You **should not** run two copies of rclone using the same VFS cache
with the same or overlapping remotes if using `--vfs-cache-mode > off`.
This can potentially cause data corruption if you do. You can work
around this by giving each rclone its own cache hierarchy with
`--cache-dir`. You don't need to worry about this if the remotes in
use don't overlap.

### --vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote and write
directly to the remote without caching anything on disk.

This will mean some operations are not possible

- Files can't be opened for both read AND write
- Files opened for write can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files open for read with O_TRUNC will be opened write only
- Files open for write only will behave as if O_TRUNC was supplied
- Open modes O_APPEND, O_TRUNC are ignored
- If an upload fails it can't be retried

### --vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk.  This means that files opened for
write will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

- Files opened for write only can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files opened for write only will ignore O_APPEND, O_TRUNC
- If an upload fails it can't be retried

### --vfs-cache-mode writes

In this mode files opened for read only are still read directly from
the remote, write only and read/write files are buffered to disk
first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

### --vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone
will keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to `--vfs-cache-mode` writes.

When reading a file rclone will read `--buffer-size` plus
`--vfs-read-ahead` bytes ahead.  The `--buffer-size` is buffered in memory
whereas the `--vfs-read-ahead` is buffered on disk.

When using this mode it is recommended that `--buffer-size` is not set
too large and `--vfs-read-ahead` is set large if required.

**IMPORTANT** not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache
directory is on a filesystem which doesn't support sparse files and it
will log an ERROR message if one is detected.

### Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file
copy has changed relative to a remote file. Fingerprints are made
from:

- size
- modification time
- hash

where available on an object.

On some backends some of these attributes are slow to read (they take
an extra API call per object, or extra work per object).

For example `hash` is slow with the `local` and `sftp` backends as
they have to read the entire file and hash it, and `modtime` is slow
with the `s3`, `swift`, `ftp` and `qingstor` backends because they
need to do an extra API call to fetch it.

If you use the `--vfs-fast-fingerprint` flag then rclone will not
include the slow operations in the fingerprint. This makes the
fingerprinting less accurate but much faster and will improve the
opening time of cached files.

If you are running a vfs cache over `local`, `s3` or `swift` backends
then using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of
the files in the cache may be invalidated and the files will need to
be downloaded again.

## VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the
chunk specified.  This can reduce the used download quota for some
remotes by requesting only chunks from the remote that are actually
read, at the cost of an increased number of requests.

These flags control the chunking:

```text
    --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
    --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
    --vfs-read-chunk-streams int            The number of parallel streams to read at once
```

The chunking behaves differently depending on the `--vfs-read-chunk-streams` parameter.

### `--vfs-read-chunk-streams` == 0

Rclone will start reading a chunk of size `--vfs-read-chunk-size`,
and then double the size for each read. When `--vfs-read-chunk-size-limit` is
specified, and greater than `--vfs-read-chunk-size`, the chunk size for each
open file will get doubled only until the specified value is reached. If the
value is "off", which is the default, the limit is disabled and the chunk size
will grow indefinitely.

With `--vfs-read-chunk-size 100M` and `--vfs-read-chunk-size-limit 0`
the following parts will be downloaded: 0-100M, 100M-200M, 200M-300M, 300M-400M
and so on. When `--vfs-read-chunk-size-limit 500M` is specified, the result would
be 0-100M, 100M-300M, 300M-700M, 700M-1200M, 1200M-1700M and so on.

Setting `--vfs-read-chunk-size` to `0` or "off" disables chunked reading.

The chunks will not be buffered in memory.

### `--vfs-read-chunk-streams` > 0

Rclone reads `--vfs-read-chunk-streams` chunks of size
`--vfs-read-chunk-size` concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links
or very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
`--vfs-read-chunk-size` and `--vfs-read-chunk-streams` as these will
depend on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be `--vfs-read-chunk-streams 16` and
`--vfs-read-chunk-size 4M`. In testing with AWS S3 the performance
scaled roughly as the `--vfs-read-chunk-streams` setting.

Similar settings should work for high latency links, but depending on
the latency they may need more `--vfs-read-chunk-streams` in order to
get the throughput.

## VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the [chunked reading](#vfs-chunked-reading)
feature.

In particular S3 and Swift benefit hugely from the `--no-modtime` flag
(or use `--use-server-modtime` for a slightly different effect) as each
read of the modification time takes a transaction.

```text
    --no-checksum     Don't compare checksums on up/download.
    --no-modtime      Don't read/write the modification time (can speed things up).
    --no-seek         Don't allow seeking in files.
    --read-only       Only allow read-only access.
```

Sometimes rclone is delivered reads or writes out of order. Rather
than seeking rclone will wait a short time for the in sequence read or
write to come in. These flags only come into effect when not using an
on disk cache file.

```text
    --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
    --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)
```

When using VFS write caching (`--vfs-cache-mode` with value writes or full),
the global flag `--transfers` can be set to adjust the number of parallel uploads
of modified files from the cache (the related global flag `--checkers` has no
effect on the VFS).

```text
    --transfers int  Number of file transfers to run in parallel (default 4)
```

## Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

```text
    --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
    --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
```

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a
file which appears as a symlink `link-to-file.txt` would be stored on
cloud storage as `link-to-file.txt.rclonelink` and the contents would
be the path to the symlink destination.

Note that `--links` enables symlink translation globally in rclone -
this includes any backend which supports the concept (for example the
local backend). `--vfs-links` just enables it for the VFS layer.

This scheme is compatible with that used by the
[local backend with the --local-links flag](/local/#symlinks-junction-points).

The `--vfs-links` flag has been designed for `rclone mount`, `rclone
nfsmount` and `rclone serve nfs`.

It hasn't been tested with the other `rclone serve` commands yet.

A limitation of the current implementation is that it expects the
caller to resolve sub-symlinks. For example given this directory tree

```text
.
├── dir
│   └── file.txt
└── linked-dir -> dir
```

The VFS will correctly resolve `linked-dir` but not
`linked-dir/file.txt`. This is not a problem for the tested commands
but may be for other commands.

**Note** that there is an outstanding issue with symlink support
[issue #8245](https://github.com/rclone/rclone/issues/8245) with duplicate
files being created when symlinks are moved into directories where
there is a file of the same name (or vice versa).

## VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only
by case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case used
to create the file is preserved and available for programs to query.
It is not allowed for two files in the same directory to differ only by case.

Usually file systems on macOS are case-insensitive. It is possible to make macOS
file systems case-sensitive but that is not the default.

The `--vfs-case-insensitive` VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the remote
as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers
to an existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the same
name is not found but a name differing only by case exists, rclone will
transparently fixup the name. This fixup happens only when an existing file
is requested. Case sensitivity of file names created anew by rclone is
controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the target)
may differ from case sensitivity of a file system presented by rclone (the source).
The flag controls whether "fixup" is performed to satisfy the target.

If the flag is not provided on the command line, then its default value depends
on the operating system where rclone runs: "true" on Windows and macOS, "false"
otherwise. If the flag is provided without a value, then it is "true".

The `--no-unicode-normalization` flag controls whether a similar "fixup" is
performed for filenames that differ but are [canonically
equivalent](https://en.wikipedia.org/wiki/Unicode_equivalence) with respect to
unicode. Unicode normalization can be particularly helpful for users of macOS,
which prefers form NFD instead of the NFC used by most other platforms. It is
therefore highly recommended to keep the default of `false` on macOS, to avoid
encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the `--vfs-block-norm-dupes`
flag allows hiding these duplicates. This comes with a performance tradeoff, as
rclone will have to scan the entire directory for duplicates when listing a
directory. For this reason, it is recommended to leave this disabled if not
needed. However, macOS users may wish to consider using it, as otherwise, if a
remote directory contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the mount,
and both will appear to be editable, however, editing either version will
actually result in only the NFD version getting edited under the hood. `--vfs-block-
norm-dupes` prevents this confusion by detecting this scenario, hiding the
duplicates, and logging an error, similar to how this is handled in `rclone
sync`.

## VFS Disk Options

This flag allows you to manually set the statistics about the filing system.
It can be useful when those statistics cannot be read correctly automatically.

```text
    --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)
```

## Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running `df` on the
filesystem, then pass the flag `--vfs-used-is-size` to rclone.
With this flag set, instead of relying on the backend to report this
information, rclone will scan the whole remote similar to `rclone size`
and compute the total used space itself.

**WARNING**: Contrary to `rclone size`, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots of API
calls resulting in extra charges. Use it as a last resort and only with caching.

## VFS Metadata

If you use the `--vfs-metadata-extension` flag you can get the VFS to
expose files which contain the [metadata](/docs/#metadata) as a JSON
blob. These files will not appear in the directory listing, but can be
`stat`-ed and opened and once they have been they **will** appear in
directory listings until the directory cache expires.

Note that some backends won't create metadata unless you pass in the
`--metadata` flag.

For example, using `rclone mount` with `--metadata --vfs-metadata-extension .metadata`
we get

```console
$ ls -l /mnt/
total 1048577
-rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

$ cat /mnt/1G.metadata
{
        "atime": "2025-03-04T17:34:22.317069787Z",
        "btime": "2025-03-03T16:03:37.708253808Z",
        "gid": "1000",
        "mode": "100664",
        "mtime": "2025-03-03T16:03:39.640238323Z",
        "uid": "1000"
}

$ ls -l /mnt/
total 1048578
-rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
-rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata
```

If the file has no metadata it will be returned as `{}` and if there
is an error reading the metadata the error will be returned as
`{"error":"error string"}`.

## Auth Proxy

If you supply the parameter `--auth-proxy /path/to/program` then
rclone will use that program to generate backends on the fly which
then are used to authenticate incoming requests.  This uses a simple
JSON based protocol with input on STDIN and output on STDOUT.

WebDAV uses HTTP authentication. SFTP-specific `--authorized-keys` and
SSH public-key authentication do not apply to this listener.

There is an example program
[bin/test_proxy.py](https://github.com/rclone/rclone/blob/master/bin/test_proxy.py)
in the rclone source code.

The program's job is to take a `user` and `pass` on the input and turn
those into the config for a backend on STDOUT in JSON format.  This
config will have any default parameters for the backend added, but it
won't use configuration from environment variables or command line
options - it is the job of the proxy program to make a complete
config.

This config generated must have this extra parameter

- `_root` - root to use for the backend

And it may have this parameter

- `_obscure` - comma separated strings for parameters to obscure

If password authentication was used by the client, input to the proxy
process (on STDIN) would look similar to this:

```json
{
  "user": "me",
  "pass": "mypassword"
}
```

And as an...

© sickn33 and contributors · MIT · sickn33/agentic-awesome-skills

Similar slash commands

All slash commands for DevOps and infrastructure →

From the same set187

The whole set →
hf-cli This skill guides Hugging Face Hub tasks through the hf CLI, from moving repository files to managing buckets and cached data. Use it when an agent needs to work with Hub resources. CX Codex +1 ★ 50,109repo stars lookdev The lookdev skill stands up a local browser studio: sliders for visual parameters, plus an annotation mode for editing prose and media in place. CX Codex +1 ★ 50,109repo stars rclone_serve_http rclone_serve_http runs a lightweight web server to expose any rclone remote over HTTP or HTTPS. It lets you browse remote directory listings in a browser or connect downstream HTTP remotes. CX Codex +1 ★ 50,109repo stars rclone_serve_s3 rclone_serve_s3 — a command for Claude Code and Codex that starts an S3-compatible server on top of any rclone remote. Supports Signature Version 4, so any S3 client or another rclone remote can connect to it. CX Codex +1 ★ 50,109repo stars axonx Guides agents through running quantitative research tasks in AxonX, inspecting execution logs, and connecting via MCP. CX Codex +1 ★ 50,109repo stars rclone_mount The rclone_mount command exposes an rclone remote as a mounted file system. Use it when cloud-stored files need to appear at a local mount point. CX Codex +1 ★ 50,109repo stars datacircle Downloads one file with every GTM API plan from datacircle.dev and hands it to the agent for pricing and comparison. CX Codex +1 ★ 50,109repo stars rclone Displays reference help for rclone CLI commands, backend options, and storage flags directly inside Claude Code or Codex sessions. CX Codex +1 ★ 50,109repo stars

Project sponsors

Companies that keep this analytics open