Skip to main content

How to use Semrush with Google Search Console

Our write-up of a story first reported by Semrush Blog

How to use Semrush with Google Search Console

Semrush and Google Search Console connect through separate integrations in each Semrush tool, not one account-wide link. GSC reports the clicks, impressions and indexing issues Google recorded. Semrush adds daily rankings, competitor data and backlink analysis.

SEO consultant Bill Widmer explains why he needs both tools: 'Semrush shows me where a site stands against competitors, but only GSC shows what Google actually did with each page. On one client site, a checklist page was cited in AI answers for 50 prompts and still earned zero clicks from Google, and GSC's impressions and average position are what tell you whether that's an indexing problem, a ranking problem, or a click problem. Semrush can't see your real clicks, and GSC can't see anyone else's site, so I never plan an SEO strategy without both.'

Which tools connect to GSC

Position Tracking imports GSC queries as tracked keywords. Connect via the Keywords window > 'Import from...' > 'Google Search Console'.

Backlink Audit pulls backlinks Google found and your disavow file. Connect via 'Integrations' > 'Google Search Console' > 'Connect'.

My Reports adds clicks, impressions, CTR and average position broken down by query, page, country, device or search appearance. Connect via the Integrations sidebar in the report builder > 'Google Search Console'.

SEO Dashboard shows your property's clicks and impressions as a chart. Connect via the ⋮ menu > 'Setup Google account' or the 'Google Search Console' tab > 'Connect'.

Site Audit integrates with Google Analytics only, so comparing its results with GSC indexing reports is a manual check. Semrush does not store data it pulls from connected Google accounts.

How to connect GSC to Semrush

Your GSC property must match the domain in your Semrush project, including www vs. non-www versions. If they don't match, Semrush can't find the property and will show a 'No properties match your campaign scope' error. For Backlink Audit, the property must cover your root domain, not a subfolder like example.com/blog/.

Open your project's SEO Dashboard, click 'Connect Google' in the top right. Sign in with the Google account that has access to your property, then select the property in the wizard. You don't need to connect Google Analytics for GSC to work. Once connected, the dashboard's 'Google Search Console' tab shows your property's clicks and impressions.

To import keywords from GSC into Position Tracking, use the 'Import from...' menu in the Keywords window. For new campaigns, find it at the top right of the Keywords step. For existing campaigns, click the gear icon and select 'Tracked keywords'. Select 'Google Search Console' from the drop-down. Review the imported list, then click 'Add keywords to campaign' and 'Save changes'. Imported keywords count toward your plan's keyword limit.

To connect GSC to Backlink Audit, give a unique Semrush email address full access to your GSC property. This step applies even if you've already connected GSC elsewhere in Semrush. You need Owner or Full permission in GSC; restricted users can't complete this step.

Open your Backlink Audit campaign, click 'Integrations' in the top right, and click 'Connect' under Google Search Console. Copy the Backlink Audit email address shown in the window. Each project gets its own address in the format backlink.audit.{code}@gmail.com. In GSC, go to Settings > 'Users and permissions' > 'Add user'. Paste the email address and select 'Full' permission. Backlink Audit needs full permission to upload your disavow file to Google. Back in Backlink Audit, click 'Check connection and Upload backlinks'. After you connect, Backlink Audit recrawls your profile with the new GSC links.

To add GSC widgets to My Reports, open the report builder and drag them in from the Integrations sidebar. Find 'Google Search Console' under SEO, then choose from two tabs: Widgets (single metrics and tables) and Groups (prebuilt sets, including Search Performance Overview, Audience Insights, Desktop Search and Mobile Search).

How to use Semrush with GSC data

Position Tracking checks rankings every day, so changes show up before they appear in GSC. GSC reports positions a few days late and only for days your page gets impressions, so a drop can go unnoticed for days.

Bill Widmer tested this on his own site. Position Tracking flagged a 19-position drop for 'b2b saas ai search consultant', one of his most important keywords, on October 27. A day later, GSC's newest data was still from October 26, so the drop wasn't visible there yet. Only Semrush showed this drop the day it happened.

In Position Tracking, add competitors to the same campaign to see whether a drop only impacted you or also affected every competitor on the SERP. Check GSC queries that rank roughly in positions 4 through 15 for difficulty and intent in Keyword Overview. Low-difficulty terms whose intent matches the page that already ranks for them are quick wins.

For queries with high impressions but few clicks, run the main term through the Keyword Magic Tool. If the related terms share the page's intent, expand the existing page to include those topics. If they point to a different need, create a new page.

Backlink Audit combines GSC's link data with Semrush's own crawl, so you review the links Google reports alongside the ones Semrush found. With both sources in one list, you're less likely to miss a toxic link that belongs in your disavow file or a lost link worth recovering.

Google only recommends disavowing when spammy links have caused (or are likely to cause) a manual action. For most sites, the bigger payoff is recovering broken and lost links.

When Bill Widmer connected GSC on his own site, referring domains rose from 984 to 1,090, and nearly all of the new ones were flagged toxic (222 to 324). Part of that came from nine days of regular crawling, but it's a reason to review new domains before you disavow anything.

If you do need to disavow, build one list in Semrush, import your existing disavow files from GSC, and upload the combined list to Google's Disavow Tool.

Checking clicks and indexing

Compare Position Tracking with the GSC chart on your SEO Dashboard. Both sit on the same page, so you can see rankings and real clicks without switching tools. If rankings rise but clicks stay flat, review the SERP for those keywords. A featured snippet, AI Overview, or weak title tag can keep searchers from clicking even when you rank well. GSC's generative AI performance reports show how often your pages appear in AI Overviews and AI Mode, which can help explain the gap.

In My Reports, place GSC widgets next to Semrush widgets in the same PDF. Clients see Google's own clicks and impressions alongside rankings, competitors, and backlink data. Try pairing a GSC Query table next to Position Tracking rankings for the same keywords.

To diagnose indexing issues, check GSC's page indexing report first, then run Site Audit to find the URLs and causes behind them. GSC tells you what Google has actually flagged, so fix those issues first. Site Audit crawls your site the way a search engine would. It shows which pages trigger each problem and catches issues Google hasn't reported yet, like broken internal links or redirect chains.

Common connection errors

'No properties match your campaign scope' means the Google account you connected doesn't have a property that matches your Semrush project domain. It usually happens when you're signed in to the wrong Google account, or when the property and project differ on www vs. non-www. Sign out of Google, sign back in with the account that owns the matching property, and connect again.

'Make sure you have added account … to your GSC properties' in Backlink Audit means GSC doesn't recognize the Backlink Audit email address. The address may be missing, added with 'Restricted' instead of 'Full' permission, or copied from a different project. Copy the address again from 'Integrations' in the current campaign, then re-add it in GSC with 'Full' permission. Each project has its own address, so one from another project won't work.

'All links were uploaded from shared properties' in Backlink Audit is not an error. It means Semrush has already uploaded all backlinks available from the properties you shared and will sync them periodically. To add more links to the audit, connect another Google account with a property that matches your campaign scope.

GSC counts the actual clicks your site received from Google. Semrush estimates traffic based on the positions your site ranks at, the monthly search volume of those keywords, and average CTR by position. Different numbers are normal and don't mean the connection is broken.

TG X Copied

Project sponsors

Companies that keep this analytics open