robodojo-motion-control — скилл для Claude Code: IK и установка
Скилл robodojo-motion-control для Claude Code объясняет планирование движений RoboDojo, восстановление после отказа IK и диагностические счётчики. Помогает разобрать, почему робот не достиг заданной позы.
MIT ★ 488 обновлён 2026-11-15
npx skills add Open-RUA/uni-robot-agent --skill robodojo-motion-control -a claude-codeЧто делает robodojo-motion-control
Скилл объясняет, как RoboDojo строит маршрут по точкам и что означают результаты восстановления после отказа IK. Он различает исходную цель target_pose и временную точку исполнения, которую показывает execution_target_position и execution_target_quaternion.
Проверка IK для каждой точки остаётся строгой: 1 mm и 0.02 rad. После отказа поиск может один раз подобрать временную цель в пределах 80% допусков конечной позиции и ориентации; фактическое положение всё равно должно соответствовать исходным допускам. Автоматического возврата в центр цели нет.
Скилл разбирает счётчики ik_statistics и recovery.stats, причины отказа и обратную связь выполнения. Успешный вызов инструмента сам по себе не подтверждает достижение позы или захват объекта: нужны измеренное состояние и изображения. Проверки конечной точки не гарантируют отсутствие столкновений на всём пути.
Какие задачи решает
- разобрать причины отказа IK по диагностическим счётчикам
- отличить временную цель восстановления от исходной позы
- проверить, достиг ли робот заданной позиции
- оценить, подтверждает ли обратная связь захват объекта
Примеры запросов агенту
- Объясни, что означают
ik_statisticsиrecovery.statsпосле отказа движения. - Сравни
target_poseсexecution_target_positionи объясни, куда направлена рука. - По
feedback.pose_reachedи фактической позе определи, достиг ли робот цель.
Как установить robodojo-motion-control
1Через Skills CLI (Vercel)
npx skills add Open-RUA/uni-robot-agent --skill robodojo-motion-control -a claude-code2Вручную: положить файлы
~/.claude/skills/motion-control/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/motion-control/
1Через Skills CLI (Vercel)
npx skills add Open-RUA/uni-robot-agent --skill robodojo-motion-control -a codex2Вручную: положить файлы
.agents/skills/motion-control/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add Open-RUA/uni-robot-agent --skill robodojo-motion-control -a cursor2Вручную: положить файлы
.cursor/skills/motion-control/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install Open-RUA/uni-robot-agent uni_robot_agent/resources/skills/robodojo/gripper/motion-control2Вручную: положить файлы
.github/skills/motion-control/SKILL.md1Через Skills CLI (Vercel)
npx skills add Open-RUA/uni-robot-agent --skill robodojo-motion-control -a gemini-cli2Командой платформы
gemini skills install https://github.com/Open-RUA/uni-robot-agent --path uni_robot_agent/resources/skills/robodojo/gripper/motion-controlВручную: положить файлы
.devin/skills/motion-control/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Claude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о robodojo-motion-control
Как установить robodojo-motion-control в Claude Code?
Выполни npx skills add Open-RUA/uni-robot-agent --skill robodojo-motion-control -a claude-code. Файл скилла находится по пути ~/.claude/skills/motion-control/SKILL.md.
Что делает robodojo-motion-control?
Скилл объясняет нативный IK RoboDojo, временные цели восстановления, ограничения движения и диагностические счётчики. Он также описывает, как сверять обратную связь с фактическим состоянием робота.
Какие ограничения IK и восстановления описывает скилл?
Проверка IK для точки использует допуски 1 mm и 0.02 rad. После отказа RoboDojo может один раз найти временную цель в пределах 80% исходных допусков, но измеренное положение должно удовлетворять исходной цели.
Исходный текст
SKILL.md · MIT
--- name: robodojo-motion-control description: Interpret RoboDojo native IK, temporary recovery goals, motion guards and diagnostic counters. --- # Interpret RoboDojo motion and recovery Use `general/gripper/pose-targeting/SKILL.md` to construct pose targets and `general/gripper/motion-recovery/SKILL.md` to choose a changed recovery from observed evidence. The details below describe this backend, not other robots. ## Waypoint planning and temporary goals Profiles set waypoint limits and final arrival tolerances; they add no approach height. RoboDojo keeps strict native waypoint IK (1 mm / 0.02 rad). After a planning rejection, one recovery search per move may choose a temporary execution goal within 80% of the original final position and orientation tolerances. The requested target remains unchanged for measured arrival checks. Read `goal_recovery` and per-arm `execution_target_position`/`execution_target_quaternion` to distinguish the route's temporary endpoint from the original `target_pose`. There is no automatic return to the exact goal center or coarse-to-fine phase. Choose tolerances that the intended operation permits before submitting move. ## Recovery diagnostics Per-arm `recovery.rejected` records stages for finally rejected candidates. `native_not_converged` and `native_constraint_rejected` are distinct; a candidate can have both. `collision_or_native_constraint` means a sampled joint connection failed a native constraint check, not necessarily that endpoint IK failed. `goal_recovery` records the optional once-per-move final-region search. A found candidate is only a temporary execution goal: subsequent waypoints still need IK and measured arrival must satisfy the original goal's tolerances. There is no automatic tightening phase. Inspect actual feedback before dependent actions. ## Execution feedback and limits A successful tool call does not prove physical arrival or task success. Inspect `feedback.pose_reached`, actual position/orientation, executed steps and stop reason. `grasp` or `release` does not prove object attachment or detachment. Use measured state and images to verify the intended effect. The current native IK includes modelled self/table constraints. Other action routes do not necessarily have identical checks. Endpoint checks and joint jump guards do not establish collision-free swept motion; task objects, the other arm and carried objects are not automatically represented by the public robot geometry. Plan short observable approaches and check clearances. This interface does not add a timed-trajectory guarantee. Control steps consume native episode budget; model thinking and network delay are separate wall time. On a partial or uncertain action, inspect returned state/status instead of replaying the same physical request. ## IK recovery goals and counts RoboDojo keeps each native waypoint solve at 1 mm / 0.02 rad. After a rejected waypoint, move may search once for a temporary endpoint inside 80% of the original final position/orientation tolerances. `target_pose` remains the requested goal; `execution_target_position` and `execution_target_quaternion` identify the possibly adjusted endpoint. `goal_recovery` reports that search, not physical arrival. Actual pose must still satisfy the original tolerances; there is no automatic return to the center or coarse-to-fine phase. Primitive per-arm `recovery.stats` and move's aggregate `ik_statistics` count: - `ik_requests`: one arm's strict waypoint planning request, including held arms when actually solved; arms skipped after an earlier rejection are not counted. - `ik_request_failures`: requests still rejected after candidate recovery. - `solver_calls` / `seeds_attempted`: 32 then 128 means two calls and 160 seeds. - `candidates_returned`: distinct seed results, with the true top1/topN alias removed. - `candidates_checked` / `candidates_rejected`: candidates examined / finally rejected. Raw and legal whole-turn representations are branches of one candidate. `seed_budget` retains its existing meaning: the largest single solve's seed budget, not the sum. Different seeds with equal joint vectors remain distinct. `rejected` counts each finally rejected candidate at most once per stage; stages can overlap, so their sum is not a count of failures. Raw top1 convergence, native feasibility and pose errors are reported separately from its combined success. `ik_candidate_rejected` covers validation/connection failures and mixed stages; none of these finite searches proves the requested pose mathematically impossible. The waypoint IK rejection rate is `ik_request_failures / ik_requests` when the denominator is nonzero. Region-search calls are separately recorded under `goal_recovery.diagnostics` and are excluded from that fraction. Do not sum move aggregates and their primitive receipts together. Across logs, identify each primitive request and arm once. `ik_statistics=null` means this backend provided no such counters, not that zero IK requests failed. ## Recovery and episode stopping IK failure and joint-jump rejection are recoverable planning feedback, not task failure or an environment failure preventing interaction. While the task remains incomplete, interaction is available and budget remains, continue recovery. Neither one rejection nor repeated rejections justify finish, ending the turn, or declaring the task impossible. Abandon an ineffective route, not the goal.
© Open-RUA · MIT · Open-RUA/uni-robot-agent