К основному содержанию
скилл CX Codex

scene-memory — скилл для Claude Code: память о сцене

Скилл scene-memory для Claude Code сохраняет связи между объектами, их исходными положениями и событиями. Агент подключает его, когда следующий шаг зависит от демонстрации, прошлого наблюдения или действия другого участника.

MIT ★ 488 обновлён 2026-11-15

Установить в Claude Code · Через Skills CLI (Vercel) Все способы и платформы ↓
npx skills add Open-RUA/uni-robot-agent --skill scene-memory -a claude-code
Открыть на GitHub

Что делает scene-memory

Скилл помогает агенту удерживать идентичность объектов, исходные ориентиры и порядок событий во время манипуляций со сценой. Он отделяет запланированное положение от наблюдаемого, а ход демонстрации — от действий самого агента. Переходы фиксируются по наблюдаемым изменениям; пропущенные или неоднозначные события остаются неопределёнными.

Перед началом действий после демонстрации агенту нужно подтвердить её завершение и передачу управления: одной неподвижной картинки недостаточно. В среде с непрерывным движением нужны свежие наблюдения с привязкой ко времени; ожидание само может изменить сцену. Скилл также предписывает сохранять исходную позу и обновлять координаты контакта, если объект переместился.

Какие задачи решает

  • сохранить идентичность похожих объектов после перемещения или перекрытия
  • отделить начальное положение объекта от его текущей позиции
  • зафиксировать порядок наблюдаемых событий и оставить пропущенные переходы неопределёнными
  • подтвердить завершение демонстрации до начала действий агента
  • обновить координаты контакта после перемещения объекта

Примеры запросов агенту

  • Отследи, какие объекты переместились в этой демонстрации, и сохрани их исходный порядок.
  • Определи, завершил ли демонстратор действие и передал ли управление агенту.
  • Сохрани исходную позу объекта и обнови его координаты контакта после перемещения.

Как установить scene-memory

1Через Skills CLI (Vercel)

npx skills add Open-RUA/uni-robot-agent --skill scene-memory -a claude-code

2Вручную: положить файлы

~/.claude/skills/scene-memory/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/scene-memory/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы о scene-memory

Как установить scene-memory в Claude Code?

Выполни npx skills add Open-RUA/uni-robot-agent --skill scene-memory -a claude-code. Файл скилла находится по пути ~/.claude/skills/scene-memory/SKILL.md.

Что делает scene-memory?

Скилл помогает сохранять идентичность объектов, исходные ориентиры и порядок событий при манипуляциях со сценой. Он отделяет наблюдаемые переходы от запланированных действий и требует подтвердить передачу управления после демонстрации.

Как scene-memory определяет, что демонстрация завершена?

Нужно наблюдать финальное размещение и завершённое отведение руки демонстратора в состояние покоя на последовательных физических шагах. Неподвижные кадры сами по себе завершение не подтверждают.

Исходный текст

SKILL.md · MIT
---
name: scene-memory
description: Preserve identities, reference images and event order across occlusion, demonstrations and changing arrangements. Use when a past observation, demonstration handoff or external event determines the next action.
---

# Keep references, events and physical progress separate

Use `general/gripper/state-verification/SKILL.md` for relationship evidence and
completion. This reference preserves identities, initial references and events
needed to choose the next operation.

## Retain identity through changes

Assign distinct identities to similar instances before moving or covering them.
Record any initial positions, orientations or order that the goal refers to;
do not overwrite those references with the objects' later locations. Update
identity-to-location links through observed transfers, not planned endpoints.

A picture or demonstration can establish identity or order without giving a
current executable world position. Match visible distinguishing features and
localize the actual object separately. Preserve identity through observed
transfers; an intended destination cannot identify an unseen face. Derive an
ordered or symbolic plan from the instruction and visible instances, keeping
that plan separate from the confirmed physical relationships.

## Observe a relevant event, then act

Keep a demonstration or another actor's progress separate from your own. Record
an event when a transition is observed, not once per frame showing the same
state. Preserve ambiguous or missed transitions as uncertain.

Give waiting a specific observable purpose and leave the waiting phase when
that event is established. If a later action confirms an earlier operation,
verify that operation before submitting the confirmation; blind replay can
advance the sequence twice.

## Separate sequence recognition from the execution handoff

The hold/step examples below assume a step-driven environment. In a continuously
running environment, use fresh time-associated observations and account for sensor
latency; waiting can change the scene even without a submitted robot action.

When the instruction requires observing a demonstration before acting, track
"sequence identified" separately from "demonstration completed; my phase started."
Inferring the last item or seeing its release does not establish the handoff.
Confirm the final demonstrated action and an explicit start signal or completed
withdrawal to a clear resting posture. "Withdrawing" is not "withdrawn"; a hand
still over the work area or a temporary pause is not sufficient evidence.

Without an explicit start signal, keep your arms in their waiting posture and
use short hold intervals to advance the demonstration. Inspect fresh observations
from successive physical steps: the final placement should remain stable and
the demonstrator should have completed withdrawal and remained at rest across
those observations. Judge the actor and relevant objects, not pixel equality of
the whole image. Static frames alone do not establish completion.

Check observation step identities. Re-reading the same state or sleeping after
queued motion ends advances no physics; apparent stillness then is not evidence
that the demonstration has finished. Wait for hold completion before comparing
its final observation with the previous one. If handoff evidence is ambiguous,
continue bounded waiting and observation rather than starting an exploratory move.

Reorientation and reachability tests are physical actions too, even without
object contact. Keep the waiting posture until the handoff is established.
This applies to observe-then-execute tasks, not explicitly concurrent interaction.

Keep observation checkpoints around placements and the expected phase transition;
do not batch long waits across unresolved events. Use no fixed waiting duration
or step count as a substitute for completion evidence. If an event was missed,
retain uncertainty and inspect recorded observations before relying on its order.

## Keep historical references separate from live state

Associate relevant observations with their capture step or time. Keep the initial
goal reference, latest observed geometry and last confirmed relation separate.
A historical view requested for recognition does not reset the scene or establish
the current object position. After compaction, retain pending job IDs and resolve
them before planning from a fresh completed observation; a queued endpoint is
not an observed state.

A segmentation match on a reference picture can identify the depicted object
without locating its physical instance. Verify scene membership and visible
material before using that geometry for contact. If the object moves, preserve
its identity but refresh contact coordinates using
`general/gripper/moving-target-control/SKILL.md`.

Preserve the original goal reference through compaction as well as movement.
A convenient canonical orientation must not replace a requested historical pose.
For asymmetric objects, retain directed distinguishing features, not only an
undirected axis or bounding box. If pose or order references need a compact
record, read `general/gripper/scene-memory/references/pose-and-order-memory.md`.

© Open-RUA · MIT · Open-RUA/uni-robot-agent

Похожие скиллы

Все скиллы по теме «Настройка агента: память, контекст, субагенты» →
pixijs-scene-core-concepts pixijs Скилл pixijs-scene-core-concepts для Claude Code, Codex, Cursor, GitHub Copilot и Gemini CLI, который даёт агенту модель сцены PixiJS v8: дерево объектов, трансформации, маски, рендер-группы. CX Codex +1 7 100установок godot-scene-management thedivergentai Скилл godot-scene-management помогает проектировать загрузку сцен, переходы, фоновые загрузки, пулы объектов и сохранение состояния в Godot. CX Codex +1 529установок pixijs-scene-sprite pixijs Скилл pixijs-scene-sprite для Claude Code объясняет агенту, как рисовать изображения в PixiJS v8: Sprite, AnimatedSprite, NineSliceSprite и TilingSprite. Покрывает рабочий код отрисовки в проекте с уже подключённым PixiJS. CX Codex +1 7 200установок threejs-scene cesartevisual Скилл threejs-scene для Claude Code и Codex выстраивает иерархии сцен Three.js, кадрирует камеры и настраивает цикл рендеринга. Предотвращает обрезку широких моделей и утечки памяти при размонтировании. CX Codex +1 671установок muapi-ai-fight-scene SamurAIGPT Скилл muapi-ai-fight-scene собирает 16-клеточную раскадровку, а затем превращает её в 15-секундный экшен-клип через Seedance 2.0 image-to-video. CX Codex +1 668установок scene-assembly https://github.com/arjun988 Скилл scene-assembly для Claude Code помогает собирать большие сцены Blender из модульных элементов и организовывать их структуру. Включается для планировки уровней, кинематографических декораций и работы с библиотечными коллекциями. CX Codex +1 590установок

Из того же набора41

Весь набор →
return-to-start Скилл return-to-start для Claude Code и Codex возвращает пустые манипуляторы робота в исходные замеренные позы. Проверяет итоговое положение и углы ориентации перед завершением эпизода. CX Codex +1 ★ 488звёзд репо held-object-geometry Скилл held-object-geometry для Claude Code определяет положение нужной части предмета относительно захвата. Включается, когда робот переносит груз, проходит рядом с препятствием или готовится к контакту с инструментом. CX Codex +1 ★ 488звёзд репо reachability-and-recovery Скилл reachability-and-recovery для Claude Code выбирает руку, подход и допустимую передачу для полного маршрута захвата. Запускается, когда доступ к месту назначения сомнителен или нужно переназначить маршрут. CX Codex +1 ★ 488звёзд репо handover Скилл handover для Claude Code передаёт удерживаемый объект из одной роботизированной руки в другую. Агент использует его для передачи между руками, а не для обычной укладки одной рукой. CX Codex +1 ★ 488звёзд репо robodojo-motion-control Скилл robodojo-motion-control для Claude Code объясняет планирование движений RoboDojo, восстановление после отказа IK и диагностические счётчики. Помогает разобрать, почему робот не достиг заданной позы. CX Codex +1 ★ 488звёзд репо supported-contact Скилл supported-contact для Claude Code планирует контакт с объектом и движение вспомогательной руки. Включается, когда нужно удержать груз и одновременно поправить или зафиксировать его приёмник. CX Codex +1 ★ 488звёзд репо pose-targeting Скилл pose-targeting для Claude Code задаёт позицию и ориентацию цели движения робота. Используется при смене инструмента, повороте или выравнивании детали в захвате. CX Codex +1 ★ 488звёзд репо contact-effect Скилл contact-effect для Claude Code проверяет контакт с целью по наблюдаемым изменениям и помогает скорректировать движение. Включается при новом контакте или после изменения хвата, геометрии инструмента либо опоры. CX Codex +1 ★ 488звёзд репо

Спонсоры проекта

Компании, которые помогают держать аналитику открытой