К основному содержанию
скилл CX Codex

draw-and-paint-art — скилл для Claude Code: рисование и установка

Скилл draw-and-paint-art для Claude Code помогает рисовать и раскрашивать персонажей, а также проверять позы и анатомию. Включается при работе над иллюстрацией, листом персонажа или текстурой.

MIT ★ 350 обновлён 2026-11-16

Установить в Claude Code · Через маркетплейс плагинов Все способы и платформы ↓
/plugin marketplace add codepawl/creator-generalist
/plugin install 2d-generalist@creator-generalist
Открыть на GitHub

Что делает draw-and-paint-art

Скилл ведёт работу от жеста и простых объёмов к анатомии, чистому контуру и цвету. Он помогает строить фигуру, учитывать перспективное сокращение, задавать направление света и рисовать в Krita, Blender Grease Pencil или кодом.

Для проверки предлагает смотреть на силуэт, пропорции и перекрытия, а лист персонажа сравнивать по масштабу и ключевым точкам. При прямом запросе на новую работу сначала выясняет детали задачи и показывает предварительный вариант; если его вызвал другой скилл с готовым заданием, повторно не спрашивает. Файл .kra сохраняют рядом с плоским экспортом.

Какие задачи решает

  • наметить жест и пропорции фигуры
  • раскрасить форму с заданным направлением света
  • проверить позу и силуэт персонажа
  • сверить виды персонажа на листе для 3D

Примеры запросов агенту

  • Нарисуй фигуру по референсу и проверь её пропорции.
  • Подготовь лист персонажа с видами спереди, сбоку и сзади для 3D-моделирования.
  • Помоги настроить слои и кисти в Krita для цифровой живописи.

Как установить draw-and-paint-art

1Через маркетплейс плагинов

/plugin marketplace add codepawl/creator-generalist
/plugin install 2d-generalist@creator-generalist

Команда ставит плагин 2d-generalist целиком, со всеми его скиллами

2Через Skills CLI (Vercel)

npx skills add codepawl/creator-generalist --skill draw-and-paint-art -a claude-code

3Вручную: положить файлы

~/.claude/skills/draw-and-paint-art/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/draw-and-paint-art/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы о draw-and-paint-art

Как установить draw-and-paint-art в Claude Code?

Добавь маркетплейс командой /plugin marketplace add codepawl/creator-generalist, затем установи плагин командой /plugin install 2d-generalist@creator-generalist.

Что делает draw-and-paint-art?

Помогает рисовать и раскрашивать фигуры, персонажей и текстуры, а также проверять анатомию, пропорции и позы. Ведёт работу от наброска до цвета.

Работает ли draw-and-paint-art с Krita и Blender Grease Pencil?

Да. Скилл охватывает рисование в Krita и Blender Grease Pencil, включая настройку инструментов Krita и работу с Grease Pencil в Blender.

Исходный текст

SKILL.md · MIT
---
name: draw-and-paint-art
description: "Draw and paint figures, characters, light and colour in any style with Krita, Blender Grease Pencil or code, and check a figure or character sheet for anatomy and pose errors. Use for gesture, construction, anatomy, foreshortening, painting light and form, hand-painted textures and turnaround sheets (\"anatomy\", \"Krita\")."
license: MIT
---

# Draw and Paint Art

This craft skill owns 2D drawing and digital painting: gesture, construction, anatomy, light, colour, Krita and Grease Pencil.
`2d-generalist`, `3d-generalist`, `model-characters` and `use-3d-software` call it. They keep the look and the order of work.

Read `local.md` next to this file first when it exists (machine paths and local rules).

## When to use

- You draw or paint a figure, a character, a prop or a painted texture.
- You build a turnaround, pose sheet or style sheet that a 3D artist will model from.
- You review a figure or sheet for anatomy, proportion, pose and silhouette errors.
- You set up Krita or Blender Grease Pencil for drawing.

## Ask first

When the user calls this skill directly for a new piece, find out what they want before you make anything. Read the
request, attachments and project files, then ask only about what is still unclear and would change the result:
purpose and platform, format (aspect, length, file type), subject details, look (style, references) and constraints.
Ask at most 4 questions in one round, each with 2 to 4 concrete options and your recommended option first (Claude Code:
`AskUserQuestion`; elsewhere a numbered list where "ok" takes the first options). Restate the goal in 2 or 3 lines,
show the cheapest preview of the look before the expensive step, and compare the result with the goal before you hand
it over. When a generalist skill called this one with a brief, use that brief and do not ask again.

## Core rules

1. Start with flow. Draw one line of action (a long S or C curve through neck and spine) before any shape.
2. Build every form from simple volumes. Use two blocks for ribcage and pelvis, cylinders for limbs, a circle at each joint and a box or ellipse for the head.
3. Draw through the forms. Draw the hidden edges so the parts do not contradict each other.
4. Work rough to clean. Lower the sketch layer opacity, trace once or twice with a darker line, and ink last.
5. Tilt the ribcage and pelvis against each other for contrapposto. Check head size against the ribcage.
6. Parts that come toward the viewer get bigger. A limb that tapers toward a joint can shrink as it comes forward.
7. Light has one direction. Paint in order: core shadow, light side, highlight, reflected light (lighter than the core shadow, darker than the lit side), cast shadow.
8. Paint values first in grayscale. Add colour with Color layers, Overlay and a Gradient Map, and keep the colours in value order.
9. Make the front line thicker where two shapes overlap, and avoid tangents between outlines.
10. Check the silhouette and the negative space. A strong silhouette is the goal in any style.
11. Shape language sets the feeling: circle is friendly, square is solid, triangle is aggressive. This holds for any style.
12. Flip the canvas often. A mirrored view shows errors that you stopped seeing.

## Workflow

1. Name the style and the use (concept, texture, sheet, final art). Pick the reference (3D pose viewer, photo, source model).
2. Draw the gesture and line of action, then the block-in (two blocks, limbs, joints, head).
3. Check proportion and pose on the block-in before adding anatomy or detail.
4. Add anatomy and surface forms, then the clean line pass with varied line weight.
5. Paint values in grayscale, then colour.
6. For 3D, export the sheet or texture and hand it to `model-characters` or `use-3d-software`.
7. Run the checks below.

## Routing

| The task is | Read |
| --- | --- |
| Gesture, line of action, construction, poses from reference, line weight | references/gesture-and-construction.md |
| Anatomy of torso, arm, leg, hand, foot, head, foreshortening, proportion checks | references/anatomy-and-foreshortening.md |
| Painting light on a form, colouring, painterly texture, portrait workflow | references/light-form-and-colour.md |
| Krita menus, dockers, brushes, layers, blending modes, Alpha Lock, transform | references/krita-and-tools.md |
| Grease Pencil v3 in Blender: drawing, layers, fills, Line Art, 2D over 3D | references/grease-pencil-drawing.md |
| Turnaround or style sheets, cut-out parts, painting textures for 3D | references/character-sheets-for-3d.md |
| Noticing, detail comparison, grayscale value check, final attack checklist, composition and colour variety | references/noticing-and-design-lessons.md |
| Paint over a Blender render, fake depth with paint | references/light-form-and-colour.md |
| Illustration stage order: sketch, sculpt, pose, props, light, paint-over | references/illustration-process-2d-3d.md |

For UV unwrap, seams, Texture Paint and rigging steps, use `model-characters` and `use-3d-software`. Do not copy those steps here.

## Checks

- Hide the sketch layer. The pose must still read from the silhouette alone.
- Flip the canvas horizontally and squint. Fix any lean, wrong head size or uneven shoulders.
- Compare head size with the ribcage, and compare limb lengths on both sides.
- Make a grayscale copy. The value order (dark, mid, light) must show the form and the light direction.
- Check each overlap and tangent in the line art.
- For a character sheet, overlay the views at the same scale. Heights, joints and key landmarks must line up across front, side and back.
- Save the file with layers (.kra) next to the flat export.
- Run the final attack checklist in `references/noticing-and-design-lessons.md` before you hand a piece over.

© CodePawl · MIT · codepawl/creator-generalist

Похожие скиллы

Каталог скиллов SKILL.md →
pixel-art-style https://github.com/arjun988 Скилл pixel-art-style для Claude Code задаёт стиль пиксель-арта и ограничения по текселям для ассетов Blender. Срабатывает на запросы о пиксельной графике, низком разрешении текстур и спрайтовом виде. CX Codex +1 514установок paint AThevon Скилл paint для Claude Code создаёт дизайн-систему проекта, генерирует токены и проводит аудит интерфейса. Запускается при проектировании визуального стиля с нуля для веба, Android или iOS. CX Codex +1 1 600установок p5-paint-animation heygen-com Скилл p5-paint-animation для Claude Code превращает текст, фото и видео в анимацию на p5.js с эффектом ручной работы. CX Codex +1 567установок scenario-zbrush-paint-render scenario-labs Скилл scenario-zbrush-paint-render автоматизирует полипейнт, запекание карт и рендеринг в ZBrush через BPR или Redshift. Пригодится 3D-художникам для подготовки презентационных шотов. CX Codex +1 434установок draw-io-diagram-generator официальный github Скилл draw-io-diagram-generator для GitHub Copilot создаёт и правит диаграммы draw.io в файлах .drawio, .drawio.svg и .drawio.png. Диаграмму можно получить прямо из запроса к агенту. CX Codex +1 2 800установок draw-io davila7 Скилл для Claude, который правит .drawio XML, конвертирует файлы в PNG и подгоняет расположение элементов на схеме. CX Codex +1 757установок

Из того же набора21

Весь набор →
3dg Запускает создание 3D-сцен и моделей в выбранном режиме. Команда /3dg открывает меню, а режим и тема задают тип результата. CX Codex +1 ★ 350звёзд репо 2dg Скилл 2dg для Claude Code запускает генератор 2D-видеоконтента и графики через слэш-команду. Принимает режим и тему для создания карт, таймлайнов, газетных коллажей или сценариев. CX Codex +1 ★ 350звёзд репо edit-video Скилл edit-video для Claude Code помогает монтировать и экспортировать видео в редакторе, который уже есть. Подключается для нарезки ролика, титров, цветокоррекции или пакетной обработки через FFmpeg. CX Codex +1 ★ 350звёзд репо sculpt-models Скилл sculpt-models для Claude Code помогает создавать и дорабатывать скульпты в Blender 5.x. Включается по запросу на скульптинг персонажа, существа, головы, ландшафта или потёртого объекта. CX Codex +1 ★ 350звёзд репо rig-characters Скилл rig-characters для Claude Code собирает риги персонажей и предметов для 2D- и 3D-анимации. Подключается для настройки скелета, исправления деформаций или экспорта в игровой движок. CX Codex +1 ★ 350звёзд репо game-generalist Скилл game-generalist для Claude Code превращает идею в оригинальную игру с игровым прототипом и плейтестом. Работает с веб-играми, Godot, Unity и Unreal. CX Codex +1 ★ 350звёзд репо use-3d-software Скилл use-3d-software для Claude Code подсказывает точные действия в 3D-программах и игровых движках. Подключается к задачам с Blender, Unity, Godot, Unreal, three.js и переносом моделей между ними. CX Codex +1 ★ 350звёзд репо paint-stylized-backgrounds Скилл paint-stylized-backgrounds для Claude Code создаёт стилизованные фоны и окружение для фильмов, игр и иллюстраций. Помогает превратить фото или рендер Blender в рисованную сцену, подготовить варианты освещения и добавить движение. CX Codex +1 ★ 350звёзд репо

Спонсоры проекта

Компании, которые помогают держать аналитику открытой