К основному содержанию
скилл CX Codex

supported-contact — скилл для Claude Code: контакт и установка

Скилл supported-contact для Claude Code планирует контакт с объектом и движение вспомогательной руки. Включается, когда нужно удержать груз и одновременно поправить или зафиксировать его приёмник.

MIT ★ 488 обновлён 2026-11-15

Установить в Claude Code · Через Skills CLI (Vercel) Все способы и платформы ↓
npx skills add Open-RUA/uni-robot-agent --skill supported-contact -a claude-code
Открыть на GitHub

Что делает supported-contact

Скилл помогает агенту планировать толчки, скольжение, нажатия и удары с учётом точки контакта и движения самого объекта. После толчка он предлагает проверить, остановился ли объект, и корректировать движение по его фактическому положению. max_steps ограничивает число шагов выполнения, но не задаёт скорость или силу.

Вспомогательная рука может поправить положение приёмника или удерживать его во время работы. Скилл задаёт проверки устойчивости, зазоров для обеих рук и положения после отпускания груза. Он также описывает движение панелей на петлях и проверку повторных нажатий.

Какие задачи решает

  • подобрать точку контакта для толчка или сдвига объекта
  • скорректировать движение после проскальзывания или перелёта цели
  • переставить приёмник свободной рукой, пока рабочая удерживает груз
  • удержать приёмник неподвижно при укладке или вставке предмета
  • проверить движение панели на петле и отпускание между нажатиями

Примеры запросов агенту

  • Сдвинь предмет к цели и проверь, остановился ли он после толчка.
  • Удерживай груз одной рукой, а свободной поправь положение приёмника.
  • Зафиксируй приёмник во время укладки предмета и проверь его положение после отпускания.

Как установить supported-contact

1Через Skills CLI (Vercel)

npx skills add Open-RUA/uni-robot-agent --skill supported-contact -a claude-code

2Вручную: положить файлы

~/.claude/skills/supported-contact/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/supported-contact/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы о supported-contact

Как установить supported-contact в Claude Code?

Выполни npx skills add Open-RUA/uni-robot-agent --skill supported-contact -a claude-code. Файл скилла находится по пути ~/.claude/skills/supported-contact/SKILL.md.

Что делает supported-contact?

Скилл помогает планировать контактные движения и действия вспомогательной руки. Он описывает, как корректировать толчки по положению объекта и удерживать приёмник во время работы.

Когда вспомогательной руке нужно удерживать приёмник?

Когда приёмник может сместиться во время контакта с предметом. Скилл предлагает сначала установить контакт, а затем проверить, остаётся ли приёмник устойчивым.

Исходный текст

SKILL.md · MIT
---
name: supported-contact
description: Plan supported contact and an assisting hand's adjustment or restraint of a receiver. Use when both objects need control or the working hand holds a load while its destination needs adjustment.
---

# Plan motion at the working contact

Identify the surface that acts on the target. With a held tool, it may be an
edge or head far from the hand. Plan its path and clearance rather than the
wrist path alone. Use `general/gripper/contact-effect/SKILL.md` for probes,
effect diagnosis, event counting and conditions for reusing a stroke.

## Pushing and sweeping

When the requested operation uses surface support, retain that support instead
of spending the episode trying to establish airborne retention. Choose contact
from the observed direction of the required object motion.

Choose the contact point with both translation and rotation in mind: an offset
side push may turn the object. Reduce corrections near alignment using the
response observed in this episode rather than blindly reversing a prior push.

For a working edge acting on several objects, inspect each affected object and
the receiving support. If the edge pushes the receiver away, the old collection
route is invalid even when the objects moved forward. Restore the receiver's
support and revise the edge path while preserving completed placements.

### Control overshoot and check settling

Start with a short push and observe how far the object translates or rotates
relative to the hand motion. Do not assume that the object follows the hand or
stops when the hand stops.

As the object approaches the desired position, shorten the push stroke using
the observed response and leave room for any continued sliding. `max_steps`
limits execution steps; reducing it is not a speed or force command.

After each uncertain push, stop advancing into the object and, when support
permits, disengage without dragging it. Use a short `hold` to advance physics
and inspect its final observation for continued drift. If motion remains
uncertain, repeat bounded waiting and observation before another push;
repeated reads of the same state do not establish settling. If the object is
visibly tipping or approaching an edge, take a feasible protective action
rather than waiting for it to settle into a fall.

Correct from the object's settled pose. After overshoot, reduce the next stroke
or revise the contact point and direction rather than immediately issuing a
large reverse push. Verify the response before batching further contact motions.

## Use an assisting hand to prepare or restrain the receiver

Give the assisting hand a specific role: adjust the receiver's position or
orientation to make the route usable, or restrain unwanted motion during contact.
Use `general/gripper/placement-and-engagement/SKILL.md` to assess access and support.
Two arms need not move simultaneously; a stable, accessible receiver needs no
extra grasp.

For example, while the working hand retains a load in clear space, the free hand
can reposition an allowed movable receiver. First establish a feasible contact
and route for that hand, preserving support, existing contents and both arms'
clearance. Pause dependent placement while the receiver moves; verify its new
opening, pose and support before updating the loaded hand's route. Continue
restraint only if needed, otherwise withdraw the assisting hand clear of entry.

Choose an accessible contact on the receiver's body compatible with the expected
load direction. Preserve the opening, placement region and working hand's exit
corridor, including both forearms. Holding a movable lid or flap does not by
itself restrain the body. Avoid a support contact that tips, deforms or obstructs
the receiver; reposition it or choose another support when necessary.

Establish the assisting contact before the operation that relies on it. A closed
gripper or stationary hand alone does not prove restraint. During a short working
motion, check that the receiver stays stable and the manipulated object advances
relative to it. If both travel together, insertion or containment may not have
progressed. If restraint slips, pause dependent motion and revise the contact or
support before continuing from refreshed geometry.

Maintain needed restraint through object release and the working hand's clear
withdrawal; retreat can still hook the rim and displace the receiver. Once the
object and receiver have stable support and the working hand is clear, remove
the assisting contact along a clear route and inspect the final relationships.
Use `general/gripper/state-verification/SKILL.md` for any disturbed relation.

## Motion constrained by a hinge

Identify the moving panel, pivot region and supported base. Contact an accessible
part of the panel and follow its observed constrained motion in short segments.
Moving the base or pressing a neighboring surface does not establish panel
motion. If the base slides, contact misses or something blocks the path, restore
support or clearance before continuing. Check panel-to-base motion directly.

## Presses and strikes

Establish an approach, contact stroke and disengagement at the actual working
surface. For repeated presses, verify release between cycles. For strikes or
tool strokes, clear the working head before lateral travel so it does not drag
across neighboring targets.

Derive target order and required repetitions from the current instruction.
Apply the contact-effect checks before relying on an uncertain stroke.

© Open-RUA · MIT · Open-RUA/uni-robot-agent

Похожие скиллы

Все скиллы по теме «Настройка агента: память, контекст, субагенты» →
robotics-engineer rohitg00 Субагент robotics-engineer для разработки автономных роботов на ROS2: восприятие, планирование маршрутов, оценка состояния и управление в реальном времени. CX Codex ★ 2 858звёзд репо sumsub-supported-id-documents sumsub Скилл sumsub-supported-id-documents читает каталог поддерживаемых документов Sumsub и редактирует настройки типов документов по странам через API. CX Codex +1 813установок sdf earthtojake Скилл создаёт и проверяет SDFormat-документы для моделей и миров Gazebo. Он включается при работе с .sdf, позами, связями, сенсорами и физикой. CX Codex +1 11 500установок srdf earthtojake Помогает создавать, редактировать и проверять .srdf для MoveIt. Используется при настройке групп планирования, состояний робота и пар отключённых столкновений. CX Codex +1 11 400установок kimodo-motion-diffusion reason-machines Скилл kimodo-motion-diffusion для генерации 3D-движений человека и робота-гуманоида через Kimodo: текстовые промпты и кинематические ограничения. Нужна GPU примерно на 17 ГБ VRAM. CX Codex +1 1 300установок contact-research официальный anthropics Скилл contact-research собирает профиль контакта из Common Room по почте, никнейму или имени. Помогает оценить вовлечённость лида и найти темы для первого контакта. CX Codex +1 3 000установок

Из того же набора41

Весь набор →
reachability-and-recovery Скилл reachability-and-recovery для Claude Code выбирает руку, подход и допустимую передачу для полного маршрута захвата. Запускается, когда доступ к месту назначения сомнителен или нужно переназначить маршрут. CX Codex +1 ★ 488звёзд репо handover Скилл handover для Claude Code передаёт удерживаемый объект из одной роботизированной руки в другую. Агент использует его для передачи между руками, а не для обычной укладки одной рукой. CX Codex +1 ★ 488звёзд репо scene-memory Скилл scene-memory для Claude Code сохраняет связи между объектами, их исходными положениями и событиями. Агент подключает его, когда следующий шаг зависит от демонстрации, прошлого наблюдения или действия другого участника. CX Codex +1 ★ 488звёзд репо robodojo-motion-control Скилл robodojo-motion-control для Claude Code объясняет планирование движений RoboDojo, восстановление после отказа IK и диагностические счётчики. Помогает разобрать, почему робот не достиг заданной позы. CX Codex +1 ★ 488звёзд репо pose-targeting Скилл pose-targeting для Claude Code задаёт позицию и ориентацию цели движения робота. Используется при смене инструмента, повороте или выравнивании детали в захвате. CX Codex +1 ★ 488звёзд репо contact-effect Скилл contact-effect для Claude Code проверяет контакт с целью по наблюдаемым изменениям и помогает скорректировать движение. Включается при новом контакте или после изменения хвата, геометрии инструмента либо опоры. CX Codex +1 ★ 488звёзд репо placement-and-engagement Скилл placement-and-engagement для Claude Code планирует размещение и механическое соединение объектов по их видимым признакам. Включается, когда нужно проверить опору, вложение детали или её посадку в соединение. CX Codex +1 ★ 488звёзд репо state-verification Скилл state-verification для Claude Code проверяет состояния объектов и связи по различимым наблюдениям. Он нужен, если следующий шаг зависит от удержания объекта, размещения на опоре или завершения действия. CX Codex +1 ★ 488звёзд репо

Спонсоры проекта

Компании, которые помогают держать аналитику открытой