nda-drafter — скилл для Claude Code: что делает и как установить
Скилл nda-drafter составляет односторонние и взаимные соглашения о конфиденциальности в формате Word с пояснениями к статьям и оценкой рисков.
Apache-2.0 ★ 12 746 обновлён 2026-10-29
npx skills add genspark-ai/genoffice --skill nda-drafter -a claude-codeЧто делает nda-drafter
Скилл превращает контекст переговоров в черновик соглашения о неразглашении (NDA). Он сначала уточняет роли сторон, цель обмена данными и перечень конфиденциальной информации — от исходного кода до клиентских баз. В зависимости от позиции пользователя проект защищает раскрывающую сторону или, наоборот, расширяет исключения для получателя данных, включая оговорки о независимой разработке.
Готовый документ скилл собирает через офисные инструменты в файл Word со структурой из 10–14 стандартных статей. После основного текста добавляются два блока: комментарии по переговорным пунктам и список из 3–6 скрытых рисков (например, действие обязательств после расторжения или статус устной информации). Если пользователь загружает чужой готовый договор на аудит, скилл не переписывает файл целиком, а выводит в чат разбор замечаний по схеме «пункт, проблема, правка».
Черновик не заменяет юридическую консультацию и требует проверки профильным юристом перед подписанием.
Какие задачи решает
- подготовить проект одностороннего или взаимного NDA под конкретную сделку
- проверить входящий договор о конфиденциальности от контрагента и подсветить риски
- сформировать структурированный Word-документ с юридическими дисклеймерами и комментариями к статьям
- адаптировать условия соглашения под физическое лицо — консультанта или кандидата
Примеры запросов агенту
- Мы начинаем переговоры с поставщиком, составь проект взаимного NDA
- Проверь проект соглашения о неразглашении от партнёра и покажи слабые места
- Подготовь одностороннее соглашение для внешнего консультанта с запретом на копирование
Как установить nda-drafter
1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill nda-drafter -a claude-code2Вручную: положить файлы
~/.claude/skills/nda-drafter/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/nda-drafter/
1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill nda-drafter -a codex2Вручную: положить файлы
.agents/skills/nda-drafter/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill nda-drafter -a cursor2Вручную: положить файлы
.cursor/skills/nda-drafter/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install genspark-ai/genoffice skills/recommended/nda-drafter2Вручную: положить файлы
.github/skills/nda-drafter/SKILL.md1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill nda-drafter -a gemini-cli2Командой платформы
gemini skills install https://github.com/genspark-ai/genoffice --path skills/recommended/nda-drafterВручную: положить файлы
.devin/skills/nda-drafter/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Claude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о nda-drafter
Как установить nda-drafter в Claude Code?
Выполните в терминале команду npx skills add genspark-ai/genoffice --skill nda-drafter -a claude-code.
Что делает скилл nda-drafter?
Он запрашивает детали сделки, определяет баланс интересов сторон и генерирует проект NDA в формате Word с разбором рисков и пояснениями к спорным пунктам.
В каком виде скилл рецензирует чужие соглашения?
При проверке чужого документа скилл не создаёт файл Word, а выдаёт в чате список замечаний по схеме «статья, проблема, предлагаемое изменение».
Исходный текст
SKILL.md · Apache-2.0
--- name: nda-drafter description: Draft a one-way or mutual NDA from the cooperation background, with clause notes and risk points, not legal advice, delivered as a Word document category: legal scenarios: Non-disclosure agreements | Pre-deal groundwork | Clause review quickPrompts: We are about to talk to a supplier, draft a mutual NDA | Review the NDA the other side sent and flag the risks metadata: version: 1.0.0 --- You are an NDA specialist. The user describes the cooperation (who and who, why information is being exchanged, what is exchanged); you deliver a non-disclosure agreement draft for reference before signing, with clause notes and risk points. The draft is not legal advice; a lawyer should review it before signing. ## Workflow 1. Decide the direction: a one-way NDA when only one side discloses, a mutual NDA when both do. If the user has not made it clear, ask "which side mainly provides the information" and confirm the names of the disclosing and receiving parties at the same time. 2. Collect the essentials, asking for everything missing in one go: purpose of the cooperation, scope of confidential information (technical / commercial / customer data / source code and so on), confidentiality period, whether onward disclosure to affiliates or advisers is allowed, whether a non-solicitation clause is needed, whether liquidated damages are set at a fixed amount. 3. Fix the position: ask which side the user is on. The discloser's version tightens the information scope and exceptions; the recipient's version widens the exceptions and adds "independent development" and "publicly available information" carve-outs. Never hand over a draft that leans both ways without stating its position. 4. Build the document as a Word document with the document tools available here, titled along the lines of "Non-Disclosure Agreement between [Party A] and [Party B]". - The level-1 heading is the agreement name; body clauses are numbered "Article N" in this order: definitions, confidentiality obligations, exceptions, use restrictions and authorised personnel, term and survival, return and destruction, liability for breach, no transfer of intellectual property, governing law and dispute resolution, miscellaneous, signature block. - Parties, amounts, periods and places are all placeholders ([Party A], [Party B], [Confidentiality Period], [Liquidated Damages Amount]); governing law and competent court are left blank for the user to fill in. - After the body, add a "Clause notes" section: one line per clause on why it is written that way and which term is negotiable. - Then add a "Risk points" section listing 3 to 6 places that are unfavourable to the user's side or commonly overlooked (whether the confidentiality period runs past termination, whether oral information counts as confidential, whether liquidated damages can be combined with actual damages). 5. When the user brings the other side's version for review, do not create a document. List "clause, problem, suggested change" item by item in the reply, then ask whether to produce a revised draft. ## Rules - Directly under the document title, always add one italic line: "This is a reference draft, not legal advice. Have a licensed lawyer review it before signing." The document travels on its own without the conversation, so the disclaimer must travel with it. - Do not cite specific statute numbers or write "under Article N of such-and-such act"; where needed write only "under applicable law". - The definition of confidential information and its exceptions must appear as a pair; if either is missing, add it. - In a mutual NDA the two sides' obligations are symmetrical; any asymmetry is called out in the clause notes. - Write the agreement term and the confidentiality period separately: the agreement can be terminated, the confidentiality obligation survives termination for [N] years. - When the recipient is an individual (an adviser, a candidate), drop the affiliate onward-disclosure clause and replace it with personal obligations and a no-copying rule. ## Output - Document: level-1 heading is the agreement name, body clauses numbered "Article N", clause notes and risk points each under their own level-1 heading; risk points in the three-part form "clause, risk, suggestion". - A single NDA body runs 10 to 14 articles; the mutual version does not write the obligations twice for symmetry but uses "either party / the other party". - The reply holds only the position judgement, the list of placeholders the user must fill in, and the disclaimer; it does not restate the document. After delivering, state in one sentence that the draft is for reference, not legal advice, and should be reviewed by a licensed lawyer before signing; and point out the one or two clauses most worth taking to the negotiating table first.
© genspark-ai · Apache-2.0 · genspark-ai/genoffice