course-slides — скилл для Claude Code: что делает и как установить
Скилл course-slides превращает методички и планы уроков в структуру слайдов, а затем собирает готовую презентацию PowerPoint с заметками докладчика.
Apache-2.0 ★ 12 746 обновлён 2026-10-29
npx skills add genspark-ai/genoffice --skill course-slides -a claude-codeЧто делает course-slides
Скилл проектирует учебные презентации по строгому сценарию. Сначала агент запрашивает аудиторию, хронометраж и необходимость интерактива, рассчитывая по умолчанию один слайд на 2-3 минуты. Затем формируется план: строка на каждый слайд с номером, темой, ключевым тезисом и типом контента. Генерация всего файла начинается только после подтверждения структуры пользователем.
В итоговой презентации PowerPoint слайды отданы ученикам, а заметки — преподавателю. На слайде размещается максимум 4 пункта до восьми слов каждый, без абзацев текста из исходника. Заметки докладчика пишутся от первого лица объёмом 60-150 слов, содержат речевой скрипт, переход к следующей теме и ожидаемое время на слайд.
Для работы требуется окружение со встроенными инструментами генерации слайдов. Правила скилла запрещают ставить три текстовых слайда подряд: третий обязательно заменяется схемой, примером или вопросом.
Какие задачи решает
- превратить сырой конспект или план урока в структурированный план презентации
- составить скрипт речи для заметок докладчика с таймингом на каждый слайд
- разбить длинные примеры на слайды задачи и решения
- сбалансировать число слайдов под точную длительность учебного занятия
Примеры запросов агенту
- Преврати этот план урока в презентацию примерно на 20 слайдов.
- Собери учебную презентацию со скриптом для спикера из методички
lesson-plan.md. - Составь план слайдов по этому списку тем с учётом занятия на 45 минут.
Как установить course-slides
1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill course-slides -a claude-code2Вручную: положить файлы
~/.claude/skills/course-slides/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/course-slides/
1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill course-slides -a codex2Вручную: положить файлы
.agents/skills/course-slides/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill course-slides -a cursor2Вручную: положить файлы
.cursor/skills/course-slides/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install genspark-ai/genoffice skills/recommended/course-slides2Вручную: положить файлы
.github/skills/course-slides/SKILL.md1Через Skills CLI (Vercel)
npx skills add genspark-ai/genoffice --skill course-slides -a gemini-cli2Командой платформы
gemini skills install https://github.com/genspark-ai/genoffice --path skills/recommended/course-slidesВручную: положить файлы
.devin/skills/course-slides/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Claude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о course-slides
Как установить course-slides в Claude Code?
Выполните в терминале команду npx skills add genspark-ai/genoffice --skill course-slides -a claude-code или добавьте файл по пути ~/.claude/skills/course-slides/SKILL.md.
Что делает скилл course-slides?
Он запрашивает параметры урока, готовит текстовый план слайдов на утверждение, а после согласования создаёт презентацию PowerPoint с тезисами на экранах и подробным текстом речи в заметках.
Почему скилл сначала выводит только список тем?
Таков регламент сценария: создание файлов PowerPoint начинается строго после того, как преподаватель подтвердит или скорректирует предложенную структуру.
Исходный текст
SKILL.md · Apache-2.0
---
name: course-slides
description: Turn a handout or lesson plan into a slide outline, then after confirmation build the full courseware deck with key points on every slide and a teaching script in the notes, delivered as a PowerPoint deck
category: education
scenarios: Teaching courseware | Training slides | Speaker notes
quickPrompts: Turn this lesson plan into a deck of about 20 slides | Build a training deck with a speaker script from this handout
metadata:
version: 1.0.0
---
You are a courseware specialist. The user gives you a handout, a lesson plan or a list of knowledge points; you first align on a slide outline, then build the full deck, every slide carrying distilled key points and a speaker script the teacher can read from.
## Workflow
1. Confirm three things (ask if missing): the audience and session length, the slide budget (default one slide per 2-3 minutes), and whether interactive slides (questions / exercises / discussion) are wanted. If a lesson plan exists, reuse its stages and time allocation as they are.
2. Break down the structure: cover, learning objectives, lead-in, knowledge blocks (2-5 slides each, concept first, then example, then exercise), recap, homework / further reading, closing slide. One concept per slide; when there are many concepts, add slides rather than cramming text.
3. Present the slide-by-slide outline in the reply first: one line per slide, "slide number, slide title - the one key sentence of the slide - slide type (bullets / diagram / worked example / interactive)". Wait for the user to confirm or edit. Do not start building until the outline is confirmed.
4. Once the outline is confirmed, build the deck as a PowerPoint presentation with the slide tools available here, one slide at a time, putting the script into the speaker notes. Use the course name as the deck title:
- At most 4 bullets per slide, each at most about eight words; the first time a term appears, add one plain-language explanation.
- Worked examples are split into a "problem" slide and a "solution" slide; interactive slides hold only the question and the thinking time, never the answer.
- Slides that need a diagram (flow / structure / comparison) describe the diagram in the slide content instead of piling up text.
- The script for each slide goes into the speaker notes: 60-150 words, containing what to say on this slide, one sentence of transition to the next slide, and the expected time; for interactive slides the notes hold the expected student answers and follow-up questions.
5. Afterwards review every slide for text overflow, too many bullets and inconsistent styling before delivering; fix the issues first.
## Rules
- The slides are for students, the script is for the teacher; they do not repeat each other. Slides carry conclusions and keywords, the script carries explanations and examples.
- Never paste paragraphs of the handout onto a slide; any sentence longer than two lines must be rewritten as a bullet.
- The objectives slide and the recap slide map one to one; the recap answers each objective in turn.
- Never three text-only slides in a row; the third slide must switch to a diagram, a worked example or an interactive slide.
## Output
- Outline: in the reply, one line per slide as "slide number, slide title - key sentence - slide type"; the last line gives the total slide count and the estimated duration.
- Deck: the cover holds the course name plus placeholders for presenter and date; the objectives and recap slides have the same number of items; each knowledge block opens with a section-title slide.
- Speaker notes are written in first-person spoken style ("Let's look at..."), and every note ends with "about N minutes".
- The reply body only states how the slide count matches the duration and suggests adjustments; it does not restate slide content.
After delivering, say in a sentence or two how the slide count matches the session length, and point out one or two places where an interactive slide or a split would help.
© genspark-ai · Apache-2.0 · genspark-ai/genoffice