К основному содержанию
скилл CX Codex

spritekiln-splash-to-model — скилл для Claude Code: модель по арту

Скилл spritekiln-splash-to-model для Claude Code превращает изображение персонажа в спецификацию SpriteKiln. Он включается, когда нужно собрать модель, спрайт или анимацию по концепт-арту.

MIT ★ 177 обновлён 2026-11-12

Установить в Claude Code · Через Skills CLI (Vercel) Все способы и платформы ↓
npx skills add LucasJRamos/spritekiln --skill spritekiln-splash-to-model -a claude-code
Открыть на GitHub

Что делает spritekiln-splash-to-model

Скилл помогает перенести персонажа с изображения в YAML-спецификацию SpriteKiln. Сначала он предлагает подготовить референс, описать пропорции, узнаваемые черты и палитру, затем собрать форму и сверить её с артом в нужном направлении. Модель проверяется с восьми направлений, даже если референс показывает только одно.

Для сравнения нужны команды spritekiln ref compare и spritekiln review; создание и обработка референса выполняются через CLI spritekiln. Если фон сложный, для его удаления можно установить дополнительный пакет splash с rembg. При обрезанном изображении без ног сравнение IoU теряет смысл: скилл предлагает оценивать только видимые пропорции.

Какие задачи решает

  • собрать YAML-спецификацию персонажа по концепт-арту
  • сохранить узнаваемые черты при уменьшении спрайта до 64 px
  • сверить силуэт и палитру модели с референсом
  • продумать персонажа для направлений, которых нет на арте

Примеры запросов агенту

  • Собери модель SpriteKiln по этому изображению персонажа.
  • Преврати этот концепт-арт в спецификацию и спрайт для SpriteKiln.
  • Сделай модель и анимации персонажа по этому референсу.

Как установить spritekiln-splash-to-model

1Через Skills CLI (Vercel)

npx skills add LucasJRamos/spritekiln --skill spritekiln-splash-to-model -a claude-code

2Вручную: положить файлы

~/.claude/skills/spritekiln-splash-to-model/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/spritekiln-splash-to-model/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы о spritekiln-splash-to-model

Как установить spritekiln-splash-to-model в Claude Code?

Выполни npx skills add LucasJRamos/spritekiln --skill spritekiln-splash-to-model -a claude-code. Файл скилла появится по пути ~/.claude/skills/spritekiln-splash-to-model/SKILL.md.

Что делает spritekiln-splash-to-model?

Он помогает преобразовать изображение персонажа в YAML-спецификацию SpriteKiln, сверить силуэт и цвета с референсом и проработать модель в восьми направлениях.

Что нужно для работы spritekiln-splash-to-model?

Нужен CLI spritekiln. Для удаления сложного фона можно установить пакет splash с rembg.

Исходный текст

SKILL.md · MIT
---
name: spritekiln-splash-to-model
description: Turn an original splash or concept art into a SpriteKiln model (spec YAML) faithful to the art and legible at 64 px in 8 directions. Use when the user provides a character image and asks for its model, sprite or animations.
---

# From a splash art to a model

Goal: capture the character's **identity** (silhouette, proportions, striking shapes, palette), not the
brush strokes. At 64 px only what is big and contrasted survives. Read [workflow.md](workflow.md),
[modeling.md](modeling.md) and [spec.md](SPEC.md) first.

## 1. Prepare the reference
```
spritekiln new <name> --extends --ref <path/splash.png>   # <specs>/characters/<name>/ with splash.png; a humanoid
                                                      #    extends the template (drop --extends to copy it)
spritekiln ref prep <specs>/characters/<name>/splash.png    # -> splash_ref/: cutout.png, cutout_pitch38.png,
                                                      #    palette.yaml, ref.json (proportions)
```
- Look at the original splash **and** `cutout.png`. The background is removed from the border inwards, so
  flat, gradient and vignetted backgrounds work, and openings such as the gap between the legs stay
  transparent. If it cut wrong: try `--tol` 4–15 (colour step, default 9), ask for a PNG with
  transparency, or install the `splash` extra (rembg) for busy backgrounds.
- Decide which **direction** the art shows (front = `s`, 3/4 front = `se`/`sw`, profile = `e`/`w`).

## 2. Write the brief (top of the spec)
Before any geometry, fill `brief:` while looking at the image:
```yaml
brief:
  summary: one sentence on who this is and how they carry themselves
  reference: splash.png (seen from se)
  proportions: "head = 1/4 of the height; shoulders 1.6x the hips; short legs"
  head: "high ponytail past the shoulders, side-swept fringe, soft jaw, pointed chin; eyes only (face: minimal)"
  must_keep: [3-6 traits that identify the character from afar]
  simplify: [what will vanish or merge at 64 px]
  palette_notes: [dominant materials and colours]
```
At most 5–6 `must_keep`. Small ornaments become a colour spot or vanish. Exaggerate what is iconic (hat,
weapon, hair, cape): at 64 px, exaggeration is fidelity. The head is never a detail to drop: with stylized
proportions it is about a fifth of the sprite. `head` says what the splash's hair and face are, in the terms
of the head and hair kits, and how much face the project's style (`face`) shows.

## 3. Palette
`splash_ref/palette.yaml` has colour families with hue-shifted ramps ready (`fam1`, `fam2`...). Copy it to
the project's palettes folder as `<name>.yaml`, **rename** the ramps (skin, cloth, hair, metal...), drop
background or noise families and merge near-identical ones. Adjust with
`spritekiln palette ramp "#hex" --steps 5`. 3–6 materials plus one emissive is ideal. In the spec:
`palette: [gothic, ../../palettes/<name>.yaml]` (gothic brings the `fx_*` ramps and basics).

## 4. Blockout
Start from a template (`humanoid`, or `side_humanoid` for a side view) or a similar spec. Over a base, give
only the keys that change (`bones: {torso_rot: {pos: ...}}`, `ik: {leg_L: {lengths: [...]}}`):
1. **World scale:** total height 1.6–2.0; adjust the pelvis height (`torso_rot.pos`) and the IK lengths.
2. **Big masses:** torso, hips and legs as ellipsoids and cones; the head's size with the `head` bone
   scale (its shape and the hair come in step 5).
3. `pose --dirs all` and `ref compare <spec> <splash> --dir <dir>`.
4. Iterate until the **camera-corrected IoU ≥ 0.65** in the art's direction and no band hint is large.
   Each silhouette is scaled to its own bounding box, so a hat tip, a raised weapon or a flared hem moves
   the whole comparison: when an extremity changes, read the overlay on the sheet, not only the number.
   `ref compare` squashes the splash by cos(pitch) like the game camera sees a front view; against the raw
   splash the IoU tops out near 0.56, so do not chase raw numbers. The hints say at which height the sprite
   is too wide or too narrow: fix the part at that height. Do not chase IoU above ~0.85; the splash has its
   own perspective and pose, and legibility matters more.

## 5. Striking shapes and materials
First the **head and the hair**, as `brief.head` says: fit the `head` kit (`jaw`, `chin`, `width`) and a
hair kit (`hair`, `ponytail`, `bun`) with their params, or model them yourself ([modeling.md](modeling.md),
"Heads, faces and hair"). Look at them with `pose --focus head --dirs all` next to the splash's face.

Then one `must_keep` at a time (horns = `tube`), adding its entry to `review.keep` as you go
([spec.md](SPEC.md): the parts or materials that show the trait, and the directions where it must). A weapon, shield, helmet, hood, hat, cape, belt or pouch
starts from a kit (`spritekiln kits`; `use:` with its params, recoloured through materials); model your own
only when no kit comes close. After each one: `pose --dirs all`. Check the **8 directions**, not only the
art's; invent what the splash does not show, coherently, and record the decision in `brief`.

## 6. Final comparison and review
```
spritekiln ref compare <spec> <splash> --dir <dir>          # -> out/compare_<dir>.png + .json
spritekiln review <spec> --ref <splash> --ref-dir <dir> [--bg <game floor>] [--tint <scene light>]
```
Open the comparison sheet (reference | sprite | silhouette overlay | 8 directions | palettes) and the review
sheet. `ref compare` also says where the sprite's colour departs from the splash's at the same height ("bands
20-30% to 40-50%: render #2a2f3a is much darker than the reference #8a2030"): a coat in the wrong colour, a
sprite far darker than the art. A splash is painted under its own light, so treat these as places to look, not
numbers to match. Then an art-direction pass ([art-direction.md](art-direction.md)); apply the high-priority
fixes.

## 7. Animate
With the model approved, follow [animation.md](animation.md). The personality of the splash (heavy, agile,
arrogant) must show in the idle and in the timing of the attack.

## Pitfalls
- A splash with a dynamic pose (raised leg, raised weapon): compare against a similar animation frame
  (`--anim attack --frame 2`) instead of the rest pose.
- A cropped splash (no feet): the IoU is meaningless; compare only the proportions of the visible part and
  say so.
- A weapon bigger than the body: keep it out of the comparison (note it in the brief) and check margins in
  QA.

## More
Reference files in this folder: [workflow.md](workflow.md), [style.md](style.md), [SPEC.md](SPEC.md), [modeling.md](modeling.md), [animation.md](animation.md), [art-direction.md](art-direction.md), [recipe.md](recipe.md).

© LucasJRamos · MIT · LucasJRamos/spritekiln

Похожие скиллы

Все скиллы по теме «Геймдев и 3D: Unity, Unreal, Godot, Blender» →
character-design-sheet 101-skills Скилл character-design-sheet помогает сохранять внешность персонажа в генерациях через FLUX LoRA, круговые схемы ракурсов и текстовые якоря. Пригодится при создании арта для игр, комиксов и новелл. CX Codex +1 65 900установок character-design omer-metin Помогающий создавать персонажей игр с чёткими силуэтами и эмоциональной выразительностью. Запускается по ключевым словам вроде character design, hero design, silhouette. CX Codex +1 467установок layer-pixel-art layerai Скилл layer-pixel-art для генерации пиксель-арта в Layer: спрайты, тайлы, циклы ходьбы и сборка кадров в спрайт-лист. Помогает, когда картинка выходит размытой или не по сетке. CX Codex +1 5 100установок pixel-art-sprites omer-metin Скилл pixel-art-sprites настраивает ассистента на отрисовку спрайтов и тайлсетов. Пригодится при разработке ретро-игр с жёсткими лимитами палитры и кадров. CX Codex +1 3 300установок game-assets OpusGameLabs Скилл game-assets для Claude Code создаёт пиксельных персонажей, врагов и предметы для браузерных игр. Подключайте его, когда геометрические фигуры нужно заменить узнаваемыми игровыми объектами. CX Codex +1 1 700установок blockbench-texturing jasonjgardner Скилл blockbench-texturing для Claude Code создаёт и раскрашивает текстуры 3D-моделей в Blockbench через MCP-инструменты. Включает работу с пиксель-артом, UV-развёртками и покраской отдельных участков модели. CX Codex +1 1 400установок

Из того же набора10

Весь набор →
spritekiln Правило spritekiln для Claude Code задаёт работу со спрайтами SpriteKiln из YAML-спецификаций. Оно включается для файлов specs/**/*.yaml. CX Codex +1 ★ 177звёзд репо animator Субагент animator для Claude Code создаёт и дорабатывает SpriteKiln-анимации. Инструмент автоматически применяет тайминги, учитывает антиципацию и проверяет переходы в восьми направлениях. CX Codex ★ 177звёзд репо character-modeler Субагент character-modeler для Claude Code моделирует персонажей, монстров и пропы в SpriteKiln по брифу или splash art. Сверяет силуэт в 8 направлениях. CX Codex ★ 177звёзд репо pixel-art-director Субагент pixel-art-director для Claude Code оценивает спрайты и анимации SpriteKiln перед финализацией ассета. Он проверяет силуэты, контраст и лица, выдавая список правок без изменения файлов. CX Codex ★ 177звёзд репо pxforge-splash-to-model Скилл pxforge-splash-to-model для Claude Code переносит концепт-арт персонажа в YAML-модель SpriteKiln. Включается, когда вы даёте арт героя и просите подготовить модель, спрайт или анимации. CX Codex +1 ★ 177звёзд репо spritekiln-animation spritekiln-animation — скилл для Claude Code, который помогает создавать и настраивать анимации по спецификации SpriteKiln. Он задаёт движение для пиксельных персонажей в восьми направлениях и размечает игровые события. CX Codex +1 ★ 177звёзд репо pxforge-animation Скилл pxforge-animation для Claude Code настраивает 8-направленную пиксельную анимацию в спецификациях SpriteKiln. Он рассчитывает тайминги кадров, антисипацию, циклы и игровые события. CX Codex +1 ★ 177звёзд репо spritekiln Скилл spritekiln для Claude Code создаёт и редактирует персонажей, монстров и предметы в виде анимированных пиксельных спрайтов с восемью направлениями. Перед первым ассетом проекта агент уточняет художественный стиль. CX Codex +1 ★ 177звёзд репо

Спонсоры проекта

Компании, которые помогают держать аналитику открытой