К основному содержанию
скилл CX Codex

change — скилл для Claude Code: что делает и как установить

Скилл change для Claude Code оформляет запрос на изменение уже собранного Briefproof проекта как отдельный цикл с проверкой регрессий. Запускается командой /briefproof:change.

MIT ★ 132 обновлён 2026-11-09

Установить в Claude Code · Через маркетплейс плагинов Все способы и платформы ↓
/plugin marketplace add dmitribogatenkov/briefproof
/plugin install briefproof@briefproof
Открыть на GitHub

Что делает change

Скилл превращает запрос на изменение в новые требования, разницу со старой спецификацией и план только затронутых задач. После сборки он проверяет запрос и повторно проходит по требованиям базового запуска, чтобы найти сломанные функции.

Работа начинается с чистого дерева проекта и завершённого запуска Briefproof. Скилл читает спецификацию и интерфейсы базового запуска, затем создаёт отдельную папку для нового цикла. Файлы базового запуска остаются историей; если запрос требует переделки проекта, предлагается начать новый цикл через /briefproof:build.

Для работы нужны Claude Code и инструмент журнала плагина mcp__briefproof__state. Незавершённый цикл можно продолжить повторным вызовом /briefproof:change.

Какие задачи решает

  • зафиксировать новые требования к уже собранному проекту
  • составить список задач, затронутых изменением
  • проверить, что прежние требования продолжают выполняться
  • найти регрессии после внесения изменений

Примеры запросов агенту

  • Измени форму регистрации: добавь поле для номера телефона и проверь прежние требования командой /briefproof:change.
  • Обнови экспорт отчётов в CSV через /briefproof:change и проверь, что остальная функциональность не сломалась.

Как установить change

1Через маркетплейс плагинов

/plugin marketplace add dmitribogatenkov/briefproof
/plugin install briefproof@briefproof

Команда ставит плагин briefproof целиком, со всеми его скиллами

2Через Skills CLI (Vercel)

npx skills add dmitribogatenkov/briefproof --skill change -a claude-code

3Вручную: положить файлы

~/.claude/skills/change/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/change/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы о change

Как установить change в Claude Code?

Добавь маркетплейс командой /plugin marketplace add dmitribogatenkov/briefproof, затем установи плагин командой /plugin install briefproof@briefproof.

Что делает change?

Он ведёт отдельный цикл изменения уже собранного проекта: фиксирует новые требования, описывает разницу со старой спецификацией и проверяет регрессии.

Что нужно для работы change?

Нужны Claude Code и инструмент журнала плагина mcp__briefproof__state. В папке проекта также должен быть завершённый запуск Briefproof.

Исходный текст

SKILL.md · MIT
---
name: change
description: Changes a project that Briefproof already built, with the same discipline at small scale. The request becomes new quoted requirements, a spec delta, only the tickets that change, and a blind re-check of the request plus a regression pass over what the base run delivered. Starts only on /briefproof:change.
disable-model-invocation: true
argument-hint: "[auto|ask] what to change, in plain words"
---

# Briefproof · change request

**First, check you are in Claude Code.** This skill needs the plugin's ledger tool,
`mcp__briefproof__state`. If it is not available, tell the user in one line,
*"Briefproof runs in Claude Code: open the Code tab (local session) or a terminal
and run `/briefproof:change`"*, and stop.

A change request is a short Briefproof run on top of a finished one. Everything
in `/briefproof:build` still holds (read its five rules if you have not this
session): the request is quoted, never paraphrased; a stranger checks the result
against the words; no code before the spec delta; one fresh executor per ticket.
What differs is scope: you touch only what the request needs, and you prove the
rest still works.

## Start

```
state {action: "init", kind: "change", request: "<the user's words, verbatim>", mode: "ask"}
```

The ledger refuses when this folder has no finished run (tell the user to run
`/briefproof:build` for a new project, or `/briefproof:adopt` for one that
already exists) or when the run is unfinished (resume it instead). A finished
adoption is a base run like any other; its brief is what the project did when
it was adopted, and a requirement marked `broken` there is fair game for the
request.
On success it creates a new run folder, `{run}`, and names the base run,
`{base}`. The mod has already written:

- `{run}/1-brief/brief.md`: the base brief with a `## Change request` section
  holding the request verbatim. This is the brief for this run.
- `{run}/1-brief/base-requirements.md`: what the base run delivered, for the
  regression pass.

Read `{base}/4-spec/spec.md`, `{base}/4-spec/interfaces.md` and the project's
`AGENTS.md` before anything else. You are changing a known system, not
discovering one.

## Stages

The eight stages are the same and the pane shows them the same way; most are
shorter.

1. **Preflight.** Confirm the working tree is clean (commit or ask). `stage manifest`.
2. **Manifest.** `add_requirements` with verbatim quotes from the *change
   request section only*. The base requirements are not re-added; they are the
   regression list.
3. **Briefing.** Ask only what the request leaves open, one round, suggested
   answer first, through `AskUserQuestion`. Often nothing.
4. **Spec.** Write `{run}/4-spec/spec.md` as a **delta**: start with one line
   naming the base spec, then only the sections that change, each saying what it
   replaces. Copy `{base}/4-spec/interfaces.md` to `{run}/4-spec/interfaces.md`
   and amend it; never edit the base run's files. **Gate G2:** the coverage
   checker reads `{run}/1-brief/brief.md` and the delta; tell it to check the
   change request section against the delta.
5. **Plan.** Tickets for the change only, each naming the files it owns. If a
   change touches a shared boundary, the three-ticket rule from the build skill
   applies (add beside, migrate, remove). **Gate G3**, commit the plan.
6. **Build.** Waves, fresh executors, reviews where it pays, exactly as in the
   build skill. Executors read `{run}/4-spec/interfaces.md`.
7. **Acceptance.** Clone to a temp dir and spawn the blind checker with
   `prompts/acceptance.md`, giving it `{run}/1-brief/brief.md`,
   `{run}/1-brief/base-requirements.md` and the clone. Tell it: *check every
   sentence of the Change request section as the brief; then, for each line of
   base-requirements.md, confirm it still holds with one quick check each and
   report any that broke.* A broken base requirement is a fix ticket before
   anything else. Save the reply as `{run}/7-acceptance/acceptance.md`. Then
   record the evidence for each new requirement:
   `set_requirement {id, status: "done", files: [<its FILES line>], note: "<evidence>"}`.
   The pane watches those files afterwards, together with the base run's: when
   this run finishes, the proof covers the whole chain. `gate G4`.
8. **Report.** `stage done` first, so the report and project memory are written
   on the Done model; the mod rewrites the report page when this turn ends. Then
   `{run}/8-report/report.md`: what changed and why, the new `R##` table, the regression result (N of N base requirements still hold), anything
   deferred, and the usage table from `show`. Update `AGENTS.md` if how to run
   or test changed.

## Red flags

- You edited a file under `{base}/`. Base runs are history.
- A base requirement broke and the report says "done" anyway.
- You rewrote the whole spec instead of a delta: the reader loses what changed.
- The request grew into a redesign. Say so, and offer `/briefproof:build` with a
  new brief instead.

## Resume

A bare `/briefproof:change` with an unfinished change run in this folder: `show`,
re-read `{run}/1-brief/brief.md` and the current stage's files, continue.

© Dmitri Bogatenkov · MIT · dmitribogatenkov/briefproof

Похожие скиллы

Все скиллы по теме «Тесты и QA» →
surgical-patch JuliusBrussee Скилл surgical-patch удерживает ассистента от лишнего рефакторинга при исправлении ошибок. Модель меняет только ответственный слой кода и пишет точечный тест. CX Codex +1 128 900установок openspec-verify-change openspec Скилл openspec-verify-change сверяет написанный код со спецификациями, задачами и архитектурой OpenSpec перед архивацией изменения. Пригодится при финальной приёмке задач. CX Codex +1 4 000установок tdd backnotprop Скилл tdd для Claude Code заставляет агента воспроизводить баг падающим тестом перед правкой кода. Включается по прямому запросу на TDD или при наличии дешёвого локального теста. CX Codex +1 10 000установок meticulous-iterative-dev alwaysmeticulous Скилл meticulous-iterative-dev ведёт многошаговую правку фронтенда и после каждого шага сверяет картинку с записанными сессиями Meticulous, чтобы регрессии всплывали сразу. CX Codex +1 9 100установок differential-audit pedrohcgs Скилл differential-audit для Claude Code сравнивает две реализации одной логики и выявляет расхождения в результатах, предупреждениях и обработке ошибок. Проверяет перенос кода между языками, рефакторинг и воспроизведение исследований. CX Codex +1 ★ 1 729звёзд репо vstack-s6-hunt-fix Hao AI Lab Скилл vstack-s6-hunt-fix для Claude Code ищет баги в пределах проверенной трассами модели и помогает проверить исправления. Он разбирает контрпримеры и сверяет результат с реальным кодом. CX Codex +1 ★ 89звёзд репо

Из того же набора3

Спонсоры проекта

Компании, которые помогают держать аналитику открытой