blender-simulation — скилл для Claude Code
Скилл blender-simulation для Claude Code и других платформ, автоматизирующий физические симуляции в Blender 5.3. Запускает скрипты для настройки жёстких тел, ткани, жидкостей и рендеринга без графического интерфейса.
MIT 504 установок ★ 2 624 обновлён 2026-11-13
npx skills add EL4CTEO/blender-skills --skill blender-simulation -a claude-codeЧто делает blender-simulation
Этот инструмент управляет физикой внутри Blender через скрипты sim_setup.py. Он автоматизирует расчёт жёстких тел, тканей с предустановками и симуляции жидкостей Mantaflow. Скилл поддерживает запекание геометрии в кэш или ключевые кадры для экспорта в игровые движки.
Для работы требуется установленный Blender 5.3. Инструмент рассчитывает массу и плотность материалов, а также настраивает коллизии для предотвращения взаимного проникновения объектов. При работе с тканью или жидкостями рекомендуется проводить предварительные тесты в низком разрешении. Изменение настроек сцены или диапазона кадров делает кэш неактуальным, поэтому требуется повторное запекание.
Какие задачи решает
- Собрать симуляцию падения или столкновения объектов
- Запечь анимацию ткани или волос в ключевые кадры
- Настроить домен жидкости для рендеринга дыма или воды
- Рассчитать физические параметры тел по плотности материала
Примеры запросов агенту
- /blender-simulation:setup --rigid --active Crate1 --passive Floor --bake --to-keys
- /blender-simulation:setup --cloth Flag --preset
cotton --pin Pin --bake - /blender-simulation:setup --gn-cloth Sheet --colliders Table --set Bendiness=0.5 --bake
Как установить blender-simulation
1Через Skills CLI (Vercel)
npx skills add EL4CTEO/blender-skills --skill blender-simulation -a claude-code2Вручную: положить файлы
~/.claude/skills/blender-simulation/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/blender-simulation/
1Через Skills CLI (Vercel)
npx skills add EL4CTEO/blender-skills --skill blender-simulation -a codex2Вручную: положить файлы
.agents/skills/blender-simulation/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add EL4CTEO/blender-skills --skill blender-simulation -a cursor2Вручную: положить файлы
.cursor/skills/blender-simulation/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install EL4CTEO/blender-skills skills/blender-simulation2Вручную: положить файлы
.github/skills/blender-simulation/SKILL.md1Через Skills CLI (Vercel)
npx skills add EL4CTEO/blender-skills --skill blender-simulation -a gemini-cli2Командой платформы
gemini skills install https://github.com/EL4CTEO/blender-skills --path skills/blender-simulationВручную: положить файлы
.devin/skills/blender-simulation/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Через Skills CLI (Vercel)
npx skills add EL4CTEO/blender-skills --skill blender-simulation -a opencodeClaude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о blender-simulation
Как установить blender-simulation в Claude Code?
Выполните команду npx skills add EL4CTEO/blender-skills --skill blender-simulation -a claude-code. После этого проверьте файл конфигурации в ~/.claude/skills/blender-simulation/SKILL.md.
Что делает этот скилл?
Он автоматизирует создание физических эффектов в Blender, включая запекание данных симуляции в кэш и экспорт движений в ключевые кадры без участия графического интерфейса.
Что нужно для работы blender-simulation?
Для работы необходим установленный Blender 5.3 и доступ к скриптам из репозитория EL4CTEO/blender-skills.
Исходный текст
SKILL.md · MIT
--- name: blender-simulation description: Physics in Blender 5.3 - rigid bodies (density mass, shapes, bake to keys), classic cloth presets and pinning, new node-based Cloth/Hair Dynamics (XPBD, Collider, effectors), Mantaflow fluids, hair curves, GN simulation zones, headless baking. Use for destruction, drapes, flags, falling objects, liquids, smoke, hair motion. license: MIT metadata: author: blender-agent-skills version: "1.2.0" --- # Simulation The execution model is in `blender-core`. Procedural sim zones are in `blender-geometry-nodes`. ## One call ``` scripts/sim_setup.py -- --rigid --active Crate1 Crate2 --passive Floor --density 500 --frames 1 120 --bake --to-keys scripts/sim_setup.py -- --cloth Flag --preset cotton --pin Pin --colliders Pole --bake scripts/sim_setup.py -- --gn-cloth Sheet --colliders Table --set Bendiness=0.5 Stretchiness=0.1 --bake ``` `--bake` steps through every frame in order (this works headless for point caches **and** GN simulation zones) and reports final positions and `min_z`, so you can verify contact. `--to-keys` turns rigid-body motion into keyframes for engines. ## Choose the solver | Need | Use | |---|---| | Falling/stacking/destruction | Rigid Body (Bullet). Pre-fracture with Cell Fracture (extension) or GN Voronoi | | Clothing, flags, drapes (production-proven) | Classic **Cloth** modifier + Collision modifiers | | New node-based cloth/hair, custom forces, procedural setups | **Cloth Dynamics (Experimental)** / **Hair Dynamics** assets (5.2, XPBD) | | Liquids, smoke, fire | Mantaflow fluid domain + flow/effector (`fluid.bake_all`) | | Hair grooms | Curves objects + hair node assets (`procedural_hair_node_assets`), Hair Dynamics for motion | | Growth, trails, custom per-frame logic | GN Simulation zone | | Soft jiggle for games | bones with spring/jiggle in-engine, or Wiggle-style constraints baked to keys | ## Rigid bodies - Real scale and real mass matter: mass = volume × density (wood 500–700, concrete 2400, steel 7850, plastic 950 kg/m³). The script computes it. - Collision shape: `CONVEX_HULL` for dynamic objects (fast, stable), `MESH` only for **passive** concave colliders, and primitives (`BOX`, `SPHERE`, `CAPSULE`) when they fit. - Stability: substeps 10 and iterations 10 (set by the script). Use a small collision margin (1 mm). Avoid objects starting interpenetrated. - Export: bake to keyframes (`--to-keys`; the built-in `rigidbody.bake_to_keyframes` needs a UI, so the script samples `matrix_world` itself), then export the actions (`blender-export-pipelines`). ## Classic cloth - Presets (from Blender's): cotton, denim, leather, rubber, silk. The mesh needs even quad density (2–5 cm edges for clothing). Use a subdivided plane or retopologized garment, never ngons. - **Pinning**: vertex group with weight 1 = pinned (`settings.vertex_group_mass`). Animate pinned verts with hooks/armature. - Collisions: colliders get a `COLLISION` modifier (thickness 1–5 mm), plus self-collision for folds. Raise `quality` (steps) for fast motion. - Apply cloth as a shape (`modifier_apply_as_shapekey`) or bake to an Alembic/point cache for render. Games: bake to bones, or apply a static drape. ## Node-based dynamics (5.2, experimental) - Assets live in `datafiles/assets/nodes/geometry_nodes_dynamics_assets.blend`: `Cloth Dynamics (Experimental)`, `Hair Dynamics`, `Collider`, `Set Effector`, `Custom Force`, `Custom Effector`. The script appends them. - Cloth inputs include `Pin Group` (attribute), `Stretchiness`, `Bendiness`, `Substeps` (5), `Constraint Steps` (15), `Mass`, `Friction`, `Collision Radius`, `Linear Damping`, `Gravity`, `Tearing` (+ mode/threshold), `Effectors Collection`, `Effectors` (bundle). - Colliders: put a `Collider` modifier on each collider object and add those objects to the collection fed into `Effectors Collection` (the script does both). - Hair: Add → Empty Hair sets up the surface + `Capture Rest Geometry`. Hair Dynamics reads the rest/deformed surface through geometry bundles. - Limits (5.2): no self-collision yet, no built-in wind/turbulence (build a `Custom Force`). Interfaces may change, so pin the Blender version in production. - The solver itself (`GeometryNodeXPBDSolver`) takes a `World` bundle, `Delta Time`, `Substeps`, `Constraint Iterations`. Building directly on it is advanced; start from the assets. ## Fluids (Mantaflow) quick setup Domain object (`FLUID` modifier `fluid_type="DOMAIN"`, `domain_type="LIQUID"|"GAS"`), resolution 64 preview / 128–256 final, cache directory set and `cache_type="ALL"` for headless; flow objects `fluid_type="FLOW"` (`flow_type` LIQUID/SMOKE/FIRE, `flow_behavior` INFLOW/GEOMETRY); obstacles `EFFECTOR`. Bake with `bpy.ops.fluid.bake_all()` under a context override with the domain active. This is slow. Test at low resolution first. ## Rules - Simulations are frame-rate and scale dependent. Set `scene.render.fps` and the scale before tuning. - Always bake before rendering/exporting, and never rely on viewport playback order. - GN simulation zones: bake per modifier (`mod.bakes`, `object.geometry_node_bake_single`), or step frames sequentially (script) in background. - Point caches in background: stepping frames from `frame_start` fills the cache. `ptcache.bake_all(bake=True)` needs a valid context. - Verify with `look(mode="frames")` plus the numbers (`min_z` ≈ the collider top = contact, no tunnelling). ## Gotchas - Objects tunnelling through colliders: thin colliders, too few substeps, or too-fast motion. Thicken, raise substeps/quality, or use a bigger collision distance. - Exploding cloth at frame 1: starting interpenetration or a zero-area face. Run `blender-asset-qa`, offset the start. - Rigid body world cache ranges are separate from the scene range (the script syncs them). - Changing anything (frame range, settings) invalidates caches. Re-bake.
© blender-agent-skills · MIT · EL4CTEO/blender-skills