К основному содержанию
скилл CX Codex

anymove-capture — скилл для Claude Code: установка

Скилл anymove-capture для Claude Code превращает двухкамерный AI-клип в игровую анимацию. Проверяет согласованность видов, подгоняет риг и выдаёт GLB с рендерами.

Apache-2.0 ★ 653 обновлён 2026-11-13

Установить в Claude Code · Через маркетплейс плагинов Все способы и платформы ↓
/plugin marketplace add patch-gg/anymove
/plugin install anymove@anymove
Открыть на GitHub

Что делает anymove-capture

anymove-capture считывает суставы из двух ракурсов, сверяет их движение и подгоняет риг сразу под оба вида. Запуск начинается командой tools/capture.sh <c> runs/<c>/videos/roar/s1/h3max.mp4 roar. Результат включает det.npz, overlay.mp4, motion.json, анимацию render/animation.glb, кадры и showcase.mp4.

Качество захвата оценивается по согласованности лап и ошибке репроекции. При проблемах доступны проверка наложения суставов, исправление перепутанных ног через --fix-swaps, настройка ограничений рига и отключение временного выравнивания через --no-align. Для просмотра диагностики используются tools/fit_check.py и tools/plot_heights.py.

Для чтения нужен NVIDIA GPU, для подгонки подходит CPU или GPU. Экспорт и рендеры требуют Blender 5.x, а Python-часть запускается в окружении Python 3.11 из requirements.txt. Нужны runs/<c>/reader.pt от anymove-reader и runs/<c>/ref/ref.png от anymove-rig.

Какие задачи решает

  • считать суставы из двух ракурсов видео
  • проверить, совпадают ли движения между видами
  • подогнать риг под фронтальный и боковой ракурсы
  • экспортировать анимацию в GLB и рендеры
  • разобрать ошибочный фит по наложению и репроекции

Примеры запросов агенту

  • Захвати движение из runs/<c>/videos/roar/s1/h3max.mp4 командой tools/capture.sh <c> runs/<c>/videos/roar/s1/h3max.mp4 roar и подготовь GLB.
  • Проверь, насколько хорошо согласованы два вида в захвате roar, и оцени ошибку репроекции.
  • Фит выглядит неверно: покажи диагностику через python tools/fit_check.py VIDEO runs/<c>/clips/<name> out.jpg 10 40 80 и предложи исправление.

Как установить anymove-capture

1Через маркетплейс плагинов

/plugin marketplace add patch-gg/anymove
/plugin install anymove@anymove

Команда ставит плагин anymove целиком, со всеми его скиллами

2Через Skills CLI (Vercel)

npx skills add patch-gg/anymove --skill anymove-capture -a claude-code

3Вручную: положить файлы

~/.claude/skills/anymove-capture/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/anymove-capture/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы об anymove-capture

Как установить anymove-capture в Claude Code?

Выполните команды по порядку: /plugin marketplace add patch-gg/anymove, затем /plugin install anymove@anymove.

Что делает anymove-capture?

Скилл извлекает суставы из двухкамерного AI-клипа, проверяет согласованность ракурсов, подгоняет риг и экспортирует анимацию в GLB вместе с рендерами и сравнительным видео.

Что нужно для работы anymove-capture?

Нужен NVIDIA GPU для чтения видео, CPU или GPU для подгонки, Blender 5.x для GLB и рендеров, а также Python 3.11 venv из requirements.txt. В проекте нужны runs/<c>/reader.pt от anymove-reader и runs/<c>/ref/ref.png от anymove-rig.

Исходный текст

SKILL.md · Apache-2.0
---
name: anymove-capture
description: Turn a two-camera AI clip into a game-ready animation with anymove - read every joint with the creature's trained reader, check that the two views agree, fit the rig in both views at once, and export a GLB with renders and a side-by-side comparison. Covers the quality gates (paw agreement, reprojection error), what to do when a fit fails, and three-quarter showcase renders. Use when someone has an anymove clip to capture, asks whether a capture is good, wants the GLB or renders of a move, or a fit looks wrong.
license: Apache-2.0
compatibility: NVIDIA GPU for reading (a few GB), CPU or GPU for the fit, Blender 5.x for the GLB and renders, Python 3.11 venv from requirements.txt. Needs runs/<c>/reader.pt (anymove-reader) and runs/<c>/ref/ref.png (anymove-rig).
---

# anymove-capture: clip in, animation out

```bash
tools/capture.sh <c> runs/<c>/videos/roar/s1/h3max.mp4 roar
```

Writes `runs/<c>/clips/roar/`: `det.npz` (every joint in both views, every frame), `overlay.mp4` (the joints drawn on
the clip), `motion.json` (the fit: root path and rotation, Euler angles per bone, joints in metres),
`render/animation.glb` (the rig with the animation, for any engine), `render/persp` and `render/side` frames, and
`showcase.mp4` (the AI clip with joints, the rig in 3/4, and clip vs rig through the same side camera).

## What happens

1. **Read.** The clip is aligned to the reference frame (video models resize or crop the canvas: an affine fit by
   ECC; "ECC did not converge" means a plain stretch was used, so check the overlay), split into its two views, and
   the reader finds every joint in each (about 10 s for 5 s of video).
2. **Check the views agree.** A joint has the same height in both halves. Per foot (creature.json `"feet"`), the
   correlation of its height between the views over the clip is the paw agreement. If the halves run out of step in
   time, the front view is time-warped onto the side view (only when that cuts the height gap by 15% or more).
3. **Fit.** Blender's forward kinematics in torch, Euler angles bounded by the joint limits, fitted to both views at
   once. Heights come mostly from the side view (the front view foreshortens leg lifts), left-right from the front
   view. It starts from an analytic IK pose aimed at the triangulated joints and anneals a robust loss from 40 px to
   6 px, so big poses (sit, rear, slam) are found. Under a minute for 5 s (about 90 s for the dragon's roar on a CPU).
4. **Export.** Blender keys the rig, writes the GLB and renders the views.

## Is it good? Read the solve output

The dragon's roar, for example:

```
paw height agreement between views: {'fpaw_L': 1.0, 'fpaw_R': 1.0, 'hpaw_L': 0.78, 'hpaw_R': None, 'score': 0.93}
sync as generated: mean height gap 4.4 px, worst 8.6 px, best constant lag 0 frames
reprojection error px: {'front': 5.92, 'front_x_only': 2.55, 'side': 7.99}
```

- **Paw agreement score:** 0.8 or more, the views tell one story: keep it. 0.5-0.8: look at `showcase.mp4`, often one
  limb is off. Under 0.5: the video model animated the views differently; reroll the clip (anymove-film). `None` for
  a foot means it barely moved (planted feet in a roar); judge that clip by the reprojection error instead.
- **Reprojection error** (layout pixels, how far the fitted rig's joints land from the readings): front_x_only of 1-3
  px and side of 2-8 px were typical on good clips. Scale by the creature's size in the frame.
- Results so far: dragon take-off 1.00, roar 0.93, swipe 0.85, walk 0.81; spider rear-up 0.99, bite 0.96, pounce
  0.89, walk 0.36-0.49 (fails); demon wing beat 0.99, slam 0.84, roar 0.73 with feet planted and 3 px reprojection;
  wolf trot 0.94 with H3 Max.

## When a fit is wrong

- Legs crossed or a limb flipped side to side in the side view: the painted colours make labels reliable, so swap
  fixing is off. `python -m mocap.solve ... --fix-swaps` swaps near/far legs where heights say the reader mixed them
  up; it "fixed" correct labels on one clip, so only use it after looking. Its pairs come from creature.json's `paint`
  groups. If the video dropped the paint and the front view swaps feet, set `"fix_front_swaps": true` in creature.json.
- The fit stays standing while the clip sits or rears: check `overlay.mp4`; if the readings are right, the limits in
  rig.json are too tight for the pose.
- Feet slide or sink: contact joints come from creature.json `contacts`, or default to every painted-limb joint near
  the ground at rest. Check the solve output's `planted contacts` line. 1 to 2 cm a step is as good as it gets for now.
- A low-confidence wrong reading the fit rightly ignored still counts in `reproj_px`. `reproj_confident_px` leaves
  those out, so judge by it. Limbs behind the body read badly from the side, so `tools/score_takes.py` also reports
  `side_near`, the near side alone.
- One joint chain won't fit, such as a tail: `--joint-weight` and `--joint-sigma` weight it by name prefix, though that
  didn't rescue the T-rex's tail swipe.
- Run `--no-align` to skip the time warp when the views were already in step and it hurt.

Debug views: `python tools/fit_check.py VIDEO runs/<c>/clips/<name> out.jpg 10 40 80` (readings as rings, fitted
joints as dots, per frame) and `python tools/plot_heights.py runs/<c>/clips/<name>/det.npz out.png` (joint heights
per view over time: lags and swaps show up as curves that don't overlap). Both need `MOCAP_CREATURE` set.

## Showcase renders (3/4 view on a shadow-catcher floor)

```bash
MOCAP_CREATURE=assets/<c> blender -b -P blender/apply_motion.py -- assets/<c>/rigged/rigged.blend \
  assets/<c>/rigged/rig_info.json runs/<c>/clips/roar/motion.json runs/<c>/clips/roar/tile \
  --views persp --samples 16 --res 1152x648 --cam -5.4,-6.0,1.4 --target 0,-0.3,1.5 --lens 32
```

`tools/capture.sh` uses creature.json `"camera"` for its 3/4 renders, and without one frames the take itself
(`tools/frame_camera.py`). So the takes share one camera, save one that frames them all:
`python tools/frame_camera.py --write assets/<c>/creature.json runs/<c>/clips/*/motion.json`. Options take a space, never
`=`. Frame the creature to its whole clip, not its rest pose: read the joint heights from the render's `joints.json` (the
demon flew to 5.3 m), then check every frame's alpha bounding box. Cameras that
worked: dragon `--cam -5.4,-6.0,1.4 --target 0,-0.3,1.5`, spider `-3.3,-3.65,1.3 / 0,-0.1,0.78`, demon
`-6.4,-7.1,1.8 / 0,-0.1,2.1` (flying: `-7.4,-8.3,2.1 / 0,-0.1,2.6`). The shadow catcher leaves a faint denoiser haze
in the alpha; when compositing, drop alpha under 10/255. `--springs assets/wolf/fur.json` adds damped spring fur on
the wolf (bones from `blender/add_fur_bones.py`).

© Patch · Apache-2.0 · patch-gg/anymove

Похожие скиллы

Все скиллы по теме «ИИ и ML» →
move-ai-motion-capture calesthio Скилл move-ai-motion-capture для Claude Code автоматизирует планирование и обработку данных захвата движения в системах Move AI. Он помогает настраивать параметры съёмки и экспорт анимации. CX Codex +1 136установок texture-state-animation RobLe3 Скилл texture-state-animation помогает продумать переходы между состояниями текстур в Blender так, чтобы не получить грубый кроссфейд целых картинок и дёргание текстур. CX Codex +1 1 300установок blender-animation blender-agent-skills Скилл blender-animation для Claude Code, автоматизирующий анимацию в Blender 5.3 через Python-скрипты. Управляет ключевыми кадрами, ретаргетингом mocap и запеканием ригов для игровых движков. CX Codex +1 757установок deepmotion-animate-3d calesthio Скилл deepmotion-animate-3d для Claude Code помогает спланировать захват движений по видео через сервис DeepMotion Animate 3D. Подключается при настройке мокапа для 3D-персонажей. CX Codex +1 143установок meshyai OpusGameLabs Генерирует 3D-модели из текста или картинки через Meshy AI, ставит скелет на гуманоидов и добавляет анимации ходьбы и бега для Three.js. CX Codex +1 1 000установок kiln elithril Скилл kiln создаёт и правит 3D-модели в Blender: от текстового описания до экспорта в GLB, FBX или USDZ. Пригодится и для проверки готового файла. CX Codex +1 ★ 231звёзд репо

Из того же набора7

anymove Плагин anymove для Claude Code превращает одно AI-видео в готовую 3D-анимацию формата GLB для любого скелета существа. Пайплайн запускает генерацию движения через fal и подгоняет кости в Blender. ★ 653звёзд репо anymove-film Скилл anymove-film для Claude Code создаёт двухкамерный AI-клип движения существа anymove. Проверяет split screen, цвета конечностей и синхронность ракурсов. CX Codex +1 ★ 653звёзд репо anymove-reader Скилл anymove-reader для Claude Code обучает детектор суставов персонажа на основе DINOv2. Запускается после подготовки рига в anymove-rig и перед захватом движений. CX Codex +1 ★ 653звёзд репо anymove-lora Скилл anymove-lora для Claude Code обучает LoRA MiniMax H3 на fal, чтобы сохранять двухкамерный кадр и цвета конечностей существа. CX Codex +1 ★ 653звёзд репо anymove Скилл anymove для Claude Code координирует захват движений негуманоидных существ по ИИ-видео в пайплайне anymove. Запускается при анимации монстров или драконов и выдаёт готовый GLB. CX Codex +1 ★ 653звёзд репо anymove-rig Скилл anymove-rig для Claude Code настраивает скелет и риггинг негуманоидных существ в Blender для анимации в anymove. Запускается при подготовке новой 3D-модели или устранении разрывов сетки. CX Codex +1 ★ 653звёзд репо

Спонсоры проекта

Компании, которые помогают держать аналитику открытой