К основному содержанию
скилл CX Codex

anymove-rig — скилл для Claude Code: что делает и как установить

Скилл anymove-rig для Claude Code настраивает скелет и риггинг негуманоидных существ в Blender для анимации в anymove. Запускается при подготовке новой 3D-модели или устранении разрывов сетки.

Apache-2.0 ★ 653 обновлён 2026-11-13

Установить в Claude Code · Через маркетплейс плагинов Все способы и платформы ↓
/plugin marketplace add patch-gg/anymove
/plugin install anymove@anymove
Открыть на GitHub

Что делает anymove-rig

Скилл готовит существо к генерации видео в anymove: ориентирует GLB-сетку мордой к -Y, выставляет масштаб, задаёт суставы и кости в rig.json, а затем строит скелет и веса через Blender. Скрипт build_rig.py объединяет вершинные швы, предотвращая разрывы геометрии на сгибах конечностей.

Каждая конечность красится в отдельный цвет в creature.json, после чего рассчитывается кадр двух камер (вид спереди и сбоку) с разделителем. Для работы требуются Blender 5.x в PATH и виртуальное окружение Python 3.11, а ключ fal.ai нужен только при генерации меша через Tripo H3.1.

Какие задачи решает

  • создать скелет для негуманоидного персонажа в rig.json
  • устранить разрывы сетки на текстурных швах при сгибе конечностей
  • настроить двухкамерный рендер вида спереди и сбоку для anymove
  • раскрасить конечности модели в контрастные цвета для видеомодели

Примеры запросов агенту

  • Сделай риг для существа spider по модели из assets/spider
  • Исправь выворачивание суставов и разрывы сетки на лапах волка
  • Настрой двухкамерную раскладку и масштаб в creature.json для дракона

Как установить anymove-rig

1Через маркетплейс плагинов

/plugin marketplace add patch-gg/anymove
/plugin install anymove@anymove

Команда ставит плагин anymove целиком, со всеми его скиллами

2Через Skills CLI (Vercel)

npx skills add patch-gg/anymove --skill anymove-rig -a claude-code

3Вручную: положить файлы

~/.claude/skills/anymove-rig/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/anymove-rig/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы об anymove-rig

Как установить anymove-rig в Claude Code?

Выполните в терминале агента /plugin marketplace add patch-gg/anymove, затем установите плагин командой /plugin install anymove@anymove.

Что делает anymove-rig?

Скилл управляет подготовкой 3D-модели: масштабирует сетку, расставляет кости в rig.json, запускает автоматический скиннинг в Blender и рендерит референсный кадр.

Что нужно для работы anymove-rig?

Нужны установленный Blender 5.x в переменной PATH (или BLENDER=...) и окружение с Python 3.11 по requirements.txt. Ключ fal.ai обязателен только если меш генерируется через Tripo.

Исходный текст

SKILL.md · Apache-2.0
---
name: anymove-rig
description: Set up a new creature for anymove - get a textured mesh, scale and face it, place its skeleton in rig.json with grid views, build and skin the rig in Blender, paint each limb its own colour, choose the two-camera framing, and render the reference frame the video model starts from. Use when adding a creature to anymove, when a rig tears or deforms badly, when the creature is cut off or tiny in the two-camera frame, or when someone asks how to rig a non-humanoid for anymove.
license: Apache-2.0
compatibility: Blender 5.x on PATH (or BLENDER=...), Python 3.11 venv from requirements.txt. A fal.ai key only if the mesh is generated with Tripo.
---

# anymove-rig: one creature, ready to film

Everything for creature `<c>` lives in `assets/<c>/`: `model.glb` (the mesh), `creature.json` (framing, paint, words
for the prompt), `rig.json` (the skeleton). Copy a close example to start: `assets/wolf` (quadruped), `assets/dragon`
(quadruped with wings), `assets/spider` (eight legs), `assets/demon` (biped with wings and tail).

## 1. The mesh

- Any textured GLB works. `tools/make_mesh.py` makes one on fal. anymove's examples are Tripo H3.1
  (`tripo3d/h3.1/image-to-3d` on fal, $0.40 with HD texture) from one FLUX 3 concept image: a plain 3/4 view of the creature on a neutral background, whole body in
  frame, limbs apart and clearly separate.
- Prefer a design where every limb reads separately. Fire, smoke, capes, weapons and long hair hide joints from the
  reader later; leave them to game VFX.

## 2. Face it, scale it, stand it on the ground

Fill in `creature.json` → `"prep": {"length_m": ..., "rotz_deg": ..., "axis": "y"}`: the real size along `axis` (y is
nose to tail; x for creatures wider than long, like a spider's leg span; z for tall bipeds), and the turn about Z that
makes it face -Y. Then:

```bash
tools/prep.sh <c>        # assets/<c>/prep/static.blend, verts.npy, and views.png (side, front, top, 10 cm grid)
```

Check `assets/<c>/prep/views.png`: in the side view the head is on the right, the feet sit on z = 0, and both feet of a
pair are level in the front view. Tripo's `align_image` orientation can leave a creature turned a few degrees; fix
`rotz_deg` until the feet are level (the demon needed -73, not -90). If unsure which way it faces, run
`blender -b -P blender/inspect_mesh.py -- assets/<c>/model.glb runs/<c>/inspect` and look at the four views.

## 3. The skeleton: rig.json

Metres in the prepped mesh's frame: the creature faces -Y, its left is +X, Z is up, the ground is z = 0.

```json
{
  "joints": {"hips": [0, 0.32, 0.86], "spine1": [0, 0.05, 0.95], "shoulder_L": [0.21, -0.55, 1.02]},
  "bones": [["pelvis", "hips", "spine1", null], ["upperarm_L", "shoulder_L", "elbow_L", "chest"]],
  "limits_deg": {"pelvis": [[-30, 30], [-20, 20], [-30, 30]], "upperarm": [[-70, 50], [-10, 10], [-25, 25]]}
}
```

- `joints`: name to [x, y, z]. Every `_L` joint is mirrored to `_R` (x negated) unless you give the `_R` joint
  yourself; give both for asymmetric meshes (the dragon's wings).
- `bones`: [name, head joint, tail joint, parent]. The first bone is the root (free to turn and move). `_L` bones are
  mirrored too. Joints at bone ends are what the reader learns to find, so put one at every place the video should
  control: paw tips, wing tips, tail segments (6 for a long tail), jaw if the mouth opens.
- `limits_deg`: per bone name, or per stem without `_L`/`_R`: [[x lo, x hi], [y lo, y hi], [z lo, z hi]] in degrees.
  **Mirrored bones share a local Z axis,** so the same Z angle raises one arm and pushes the other across the body. If a
  stem's Z range isn't symmetric, give each side its own, mirrored: `upperarm_L` z `[-90, 55]`, `upperarm_R` z `[-55, 90]`.
  Local X is the bending axis (world X for bones in the body's plane), Y runs along the bone (twist: small for spine
  and legs, ±8-20; arms can need ±40), Z swings sideways. Limits shape the training poses as well as the fit: too wide
  and the reader learns impossible poses, too narrow and it can't read the move.

Place joints from the grid views. After each edit:

```bash
tools/prep.sh <c>               # redraws views.png with the joints and bones on the grid
tools/rig.sh <c> preview        # joints over an x-ray of the mesh: assets/<c>/prep/preview/joints_{side,front,top}.png
```

Joints belong inside the limb, at the pivot: the elbow at the bend, not on the skin. For legs, take the centre line
from the side and front views; for wings, put the wrist and finger tips on the membrane's edge.

## 4. Build, skin, paint, render the reference

Fill in `creature.json` → `"paint"`: one group per limb with a colour and the bones it covers, left and right in
different colours, all colours far apart (pink #F53CD1, blue #2F6BFF, yellow #FFD21F, cyan #19D3E0, orange #FF7A1A,
green #2BD94A, purple #9B4DFF, red #FF2B2B). Set `"feet"` to the paw or foot joints (the sync score uses them).

```bash
tools/rig.sh <c>     # assets/<c>/rigged/{rigged.blend, rig_info.json, testpose_*.png}, runs/<c>/ref/ref.png
```

`build_rig.py` merges the seam vertices first (Tripo splits the mesh at every texture seam; skipping this tears the
thighs open when a joint bends), skins with Blender's automatic weights, smooths them and keeps 4 bones per vertex.
Check `testpose_front.png` and `testpose_side.png`: the bent limbs stay whole and only the painted part moves.

## 5. The two-camera framing: creature.json "layout"

`{"W_FRONT": 640, "W_SIDE": 640, "M_PER_PX": 0.006875, "GROUND_V": 630}`: widths of the two views in pixels (they sum
to 1280; 420 + 860 suits a long, narrow quadruped, 640 + 640 a wide one), metres per pixel, and the ground's pixel
row in the 720-row frame. The creature in its biggest pose must fit both views with margin: height under about
`GROUND_V × M_PER_PX × 0.85`, width under `W_FRONT × M_PER_PX`, length under `W_SIDE × M_PER_PX`. A dragon rearing
with wings up needs more headroom than one standing. Re-run `tools/rig.sh <c>` after changing it and look at
`runs/<c>/ref/ref.png`: the whole creature, both views, a dark divider between them, nothing touching an edge.

## 6. Words for the prompt

Also in `creature.json`: `name` ("spider"), `noun` ("giant spider"), `describe` ("a black armoured giant spider with
bone-coloured markings"), `colour_code` ("first left leg pink, first right leg blue; ..."), `count` ("Exactly eight
legs, two fangs, one body, one round abdomen."), `flank` ("flank" or "side") and `limbs` ("legs" or "limbs").
`tools/make_prompt.py` builds every prompt from these (anymove-film).

Last, `"camera": {"cam": "-5.4,-6.0,1.4", "target": "0,-0.3,1.5", "lens": 32}` is the 3/4 view that
`tools/capture.sh` renders each move from (anymove-capture says how to frame it). Without it, the wolf's applies.

## Failure modes seen

- Torn or gaping thighs when a leg bends: seam vertices weren't merged (a mesh from a tool other than build_rig.py),
  or a joint sits outside the limb.
- A limb half painted: the paint group misses a bone, or the weights spill onto the body; move the joint, rebuild.
- The rig bends the wrong way: the bone's local X isn't the bending axis. Keep bones of a limb in one plane.
- Automatic rigging (UniRig) can replace hand placement; its install pulls prebuilt flash-attn wheels from GitHub.

© Patch · Apache-2.0 · patch-gg/anymove

Похожие скиллы

Все скиллы по теме «Геймдев и 3D: Unity, Unreal, Godot, Blender» →
scenario-blender-rigging scenario-labs Скилл scenario-blender-rigging для риггинга персонажа, существа или пропа в Blender через Python: метариг Rigify, веса, IK/FK, лицевой риг. CX Codex +1 1 200установок blender-clothing blender-agent-skills Скилл blender-clothing для Claude Code автоматизирует создание игровой одежды в Blender 5.3. Извлекает геометрию из полисетки тела, переносит веса костей и устраняет сквозные пробивания ткани. CX Codex +1 416установок scenario-blender-animation scenario-labs Скилл scenario-blender-animation автоматизирует анимацию персонажей и объектов в Blender через Python-скрипты. Он полезен при позовом блокинге, сглаживании кривых, артикуляции лица и проверке дуг. CX Codex +1 1 200установок blender-image-to-3d majidmanzarpour Скилл blender-image-to-3d для Claude Code собирает игровой 3D-ассет в Blender по референсам через контролируемые фазы с рендером и сравнением. Запускается при упоминании референс-изображения для создания модели. CX Codex +1 917установок blender-facial-shapekeys blender-agent-skills Скилл blender-facial-shapekeys для Claude Code настраивает лицевые риги и шейп-кеи в Blender 5.3 для ARKit 52 и экспорта в движки. Запускается при подготовке трехмерных персонажей к анимации или экспорту. CX Codex +1 548установок animation https://github.com/arjun988 Скилл animation для Claude Code автоматизирует создание анимаций в Blender. Инструмент запускается при настройке ключевых кадров для персонажей и объектов. CX Codex +1 675установок

Из того же набора7

anymove Плагин anymove для Claude Code превращает одно AI-видео в готовую 3D-анимацию формата GLB для любого скелета существа. Пайплайн запускает генерацию движения через fal и подгоняет кости в Blender. ★ 653звёзд репо anymove-film Скилл anymove-film для Claude Code создаёт двухкамерный AI-клип движения существа anymove. Проверяет split screen, цвета конечностей и синхронность ракурсов. CX Codex +1 ★ 653звёзд репо anymove-reader Скилл anymove-reader для Claude Code обучает детектор суставов персонажа на основе DINOv2. Запускается после подготовки рига в anymove-rig и перед захватом движений. CX Codex +1 ★ 653звёзд репо anymove-lora Скилл anymove-lora для Claude Code обучает LoRA MiniMax H3 на fal, чтобы сохранять двухкамерный кадр и цвета конечностей существа. CX Codex +1 ★ 653звёзд репо anymove Скилл anymove для Claude Code координирует захват движений негуманоидных существ по ИИ-видео в пайплайне anymove. Запускается при анимации монстров или драконов и выдаёт готовый GLB. CX Codex +1 ★ 653звёзд репо anymove-capture Скилл anymove-capture для Claude Code превращает двухкамерный AI-клип в игровую анимацию. Проверяет согласованность видов, подгоняет риг и выдаёт GLB с рендерами. CX Codex +1 ★ 653звёзд репо

Ещё в каталоге

Спонсоры проекта

Компании, которые помогают держать аналитику открытой