К основному содержанию
скилл CX Codex

tag-team — скилл для Claude Code: что делает и как установить

Скилл tag-team для Claude Code запускает двух агентов на одной задаче: один вносит изменения, второй проверяет результат. Включается по просьбе объединить агентов для реализации и ревью.

Apache-2.0 ★ 869 обновлён 2026-11-16

Установить в Claude Code · Через Skills CLI (Vercel) Все способы и платформы ↓
npx skills add sno-ai/sno-station-skills --skill tag-team -a claude-code
Открыть на GitHub

Что делает tag-team

Скилл запускает двух новых агентов в текущей папке проекта: один выполняет задачу, другой проверяет изменённые файлы и сообщает о дефектах или об их отсутствии. Агенты обмениваются исправлениями и проверками через Reach, а команда возвращает первый отзыв.

Для работы нужны команда sno с Reach версии 2.1.7 или новее, tmux и хотя бы один CLI агента с активным входом. Запускать пару можно только по прямой просьбе: оба агента работают без запросов на подтверждение. Задачу передают одной непустой строкой, начинающейся не с дефиса.

Команда ждёт первый отзыв несколько минут. Если в нём найдены дефекты, агенты продолжают обмениваться сообщениями отдельно; состояние можно запросить у проверяющего. Пока они правят одни и те же файлы, нельзя запускать третьего проверяющего или менять эти файлы.

Какие задачи решает

  • передать реализацию и проверку одной задачи двум агентам
  • получить список дефектов в изменённых файлах
  • организовать обмен исправлениями между исполнителем и проверяющим
  • узнать, завершилось ли повторное ревью

Примеры запросов агенту

  • Объедините двух агентов: пусть один исправит перенаправление после входа, а второй проверит изменённые файлы.
  • Поручите одному агенту добавить проверку формы, а второму — найти дефекты в изменениях.
  • Запустите пару агентов для реализации и взаимного ревью этой задачи.

Как установить tag-team

1Через Skills CLI (Vercel)

npx skills add sno-ai/sno-station-skills --skill tag-team -a claude-code

2Вручную: положить файлы

~/.claude/skills/skill/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/skill/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы о tag-team

Как установить tag-team в Claude Code?

Выполните npx skills add sno-ai/sno-station-skills --skill tag-team -a claude-code. Файл скилла устанавливается по пути ~/.claude/skills/skill/SKILL.md.

Что делает tag-team?

Он запускает двух агентов на одной задаче: первый вносит изменения, второй проверяет их. Агенты передают друг другу замечания и исправления через Reach.

Что нужно для работы tag-team?

Нужны команда sno с Reach версии 2.1.7 или новее, tmux и хотя бы один CLI агента с активным входом.

Исходный текст

SKILL.md · Apache-2.0
---
name: tag-team
description: "Put two agents on one task: one builds, the other reviews what it built, and they settle the findings between themselves. Use when asked to pair agents, tag-team a task, or have work built and reviewed without the person carrying it between agents. Not for reviewing work that already exists (peer-review) or for passing a task on (handoff)."
requires:
  programs:
    - {name: reach, min_version: "2.1.7"}
  harness:
    - {slot: 4.shell, need: required}
---

# tag-team

One command starts two new agents on the same task in the current project folder. The first
implements. The second reads the result and the changed files and answers with concrete
defects or an explicit no-defect result. Their assignments tell them to keep exchanging fixes
and reviews through Reach, the messaging layer between agents (see the `reach` skill). The
command itself brings back only the first review; following the rest is your job (below).

Needs: the `sno` command with its Reach program, version 2.1.7 or later, tmux, and at least
one signed-in agent CLI (Claude Code, Codex, Cursor, Hermes or OpenClaw).

## Before you start

1. Check that the command exists: `sno reach pair --help` prints a usage line and starts
   nothing. If the `sno` command itself is missing, Sno Station is not installed: stop and
   point the person to its install instructions at https://github.com/sno-ai/sno-station. If
   `sno` runs but `pair` is not a known verb, its Reach program is older than 2.1.7 and
   `sno setup` updates it. In both cases do not imitate the pair by hand.
2. Both agents run with approval prompts off. Start a pair only when the person asked for
   one. If you are proposing it yourself, say that the two agents will act without asking
   and wait for a yes.
3. Write the task as one self-contained string. The two agents are new: they have none of
   this conversation. Name the goal, the files or area, and how to tell it is done.
4. Run it from the folder the work belongs to. Both agents start there.

## Start the pair

```bash
sno reach pair "Fix the login redirect so a signed-out visitor returns to the page they asked for"
```

The command takes exactly one nonblank task string, and the string must not begin with `-`: a
task copied from a list as `- fix the login` is read as an option and refused. Start it with a
word.

## Read what it prints

- `Agents use <a> (<vendor>) and <b> (<vendor>).` This run has one agent from each of two
  vendors, so the review comes from the other vendor.
- `Both agents use <a> (<vendor>). ... this pair has no cross-vendor review.` This run uses
  one agent kind for both roles. The pair still builds and reviews; tell the person that this
  review is not a cross-vendor review. The line does not say why, so do not add a reason.
- `Implementer: <address>; view: tmux attach-session -t <name>` and the same line for
  `Reviewer`. Pass both lines to the person unchanged: that is how they watch.
- `Review returned by <address>:` followed by the first review. Relay its findings or its
  no-defect result.

The command waits a few minutes for the first review and then returns. A final line saying
`no verified review result` means only that no review reached this command before it
returned; the two assignments stay stored. It does not show that the pair failed, and it does
not show that both agents are still working. Check before you report: `sno reach seats --json`
for the two addresses, then `sno reach watch <address> --timeout 60 --idle 10` on each. Tell
the person what you saw and give the two `view:` lines. Do not start the pair again.

## After the first review

- The first review says no defect: the pair is finished. Report that, with the changed paths
  it names.
- The first review lists defects: the pair is not finished. Report the findings as open. The
  fix and the next review travel between the two agents' mailboxes, not back to this command.
- To learn where it stands, ask the reviewer:
  `sno reach call <reviewer address> "In one line: is your latest review of the fixed files clean, or what is still open?" --timeout 120`.
  Read the output itself. Exit 0 only means the reviewer received the question; it is not a
  promise that it answered. Only an explicit answer from the reviewer to this question
  counts. With any exit code, if the output holds no such answer, say the state is unknown
  and give the two `view:` lines.
- After a first review that listed defects, report the work as reviewed clean only when the
  reviewer's own answer says so.

## While they work

- The pair is self-contained. Do not start a third reviewer and do not run `peer-review` on
  the same change while the pair is still exchanging fixes.
- To look without interrupting: `sno reach watch <address> --timeout 60 --idle 10`.
- To say something to one of them: `sno reach call <address> "<text>" --timeout 120`.
- The two agents edit the same checkout you are in. Leave the files they are changing alone
  until the review is clean.

## When it refuses

- `pair requires one nonblank task string`: pass the whole task as one quoted argument.
- The usage line is printed and nothing starts: the task began with `-`. Reword it to start
  with a word.
- `no usable signed-in agent found; no agents started`: nothing was selected. The lines
  printed just before it name each agent and why it was passed over (`CLI unavailable`, or
  `login signed out` or `unknown`). Pass those lines on as printed; do not guess a cause they
  do not state, and do not retry.
- `no implementer started`: the first agent could not be launched; nothing is running. Report
  the line as printed.
- `pair assign <address>: delivery failed`: both agents started but one of them did not get
  its assignment, and the command stops without waiting for a review. Report the line as
  printed, check both addresses with `sno reach seats --json` and `sno reach watch`, and do
  not start the pair again.
- `reviewer launch failed ... only implementer started`: one agent is working without a
  reviewer. Tell the person, and offer `peer-review` on the result once it is finished.

© sno-ai · Apache-2.0 · sno-ai/sno-station-skills

Похожие скиллы

Все скиллы по теме «Настройка агента: память, контекст, субагенты» →
canonical-tag kostja94 Скилл canonical-tag разбирает дубли страниц по протоколу, хосту, слэшам и параметрам и говорит, где ставить редирект, а где canonical. CX Codex +1 1 200установок tag-taxonomy Ar9av Скилл tag-taxonomy проверяет и приводит к единому словарю теги в заметках Obsidian-базы. Он находит дубликаты, исправляет псевдонимы и помогает размечать новые страницы без хаоса в метаданных. CX Codex +1 3 200установок tag-release jssblck Скилл tag-release автоматизирует подготовку и публикацию релизных тегов в Git по правилам репозитория. Скилл сам определяет следующую версию, проверяет CI и следит за пайплайном. CX Codex +1 1 700установок title-tag kostja94 Скилл title-tag для подготовки, аудита и оптимизации HTML-тега title с проверкой на каннибализацию и согласованность с H1. CX Codex +1 1 300установок TAG IT Verify TAG-IT-NETWORK MCP-сервер TAG IT Verify для Claude Code и других агентов, возвращает статус и происхождение физических товаров с NFC-метками прямо в диалоге. CX Codex +1 ★ 1звёзд репо tag-agent davila7 Субагент tag-agent для Claude Code приводит теги базы знаний к единой иерархии и устраняет дубли в заметках Obsidian. CX Codex 746установок

Из того же набора40

Весь набор →
cos-evolve Скилл cos-evolve для Claude Code превращает повторяющиеся управленческие ошибки в правила для COS или PL. COS подключает его после активации роли владельцем сессии. CX Codex +1 ★ 869звёзд репо codex-coder Скилл codex-coder для Claude Code распределяет задачи по Shell, TypeScript, Python или Rust. Включается при просьбе написать код через Codex, перенести проект на другой язык или изменить файлы на нескольких языках. CX Codex +1 ★ 869звёзд репо codex-coder Скилл codex-coder для Claude Code передаёт задачи по написанию кода Codex через codex exec. Он подключается для Shell, TypeScript, Python и Rust, в том числе при миграции между языками. CX Codex +1 ★ 869звёзд репо deliver Выполняет выпущенный чартёр до проверенного результата. Он подключается по команде /deliver или когда его назначили исполнителем. CX Codex +1 ★ 869звёзд репо subscription-quota-check Скилл subscription-quota-check для Claude Code и Codex читает остаток подписочной квоты без расходования лимита. Запускается по запросу или после отказа провайдера из-за квоты. CX Codex +1 ★ 869звёзд репо rotate-agent Скилл rotate-agent для Claude Code переключает работу на другую модель или агента при достижении порога квоты. После активации он проверяет квоту отправителя и перебирает варианты в заданном порядке. CX Codex +1 ★ 869звёзд репо reach Связывает агентов через Reach. Instant Messenger ждёт ответ, а Agent Email сохраняет сообщения и задачи для обработки позже. CX Codex +1 ★ 869звёзд репо join-talk Скилл join-talk для Claude Code регистрирует текущий диалог и терминал в Reach. Запускается по просьбе подключить агента или сделать его доступным для сообщений и вызовов. CX Codex +1 ★ 869звёзд репо

Спонсоры проекта

Компании, которые помогают держать аналитику открытой