join-talk — скилл для Claude Code: регистрация в Reach
Скилл join-talk для Claude Code регистрирует текущий диалог и терминал в Reach. Запускается по просьбе подключить агента или сделать его доступным для сообщений и вызовов.
Apache-2.0 ★ 869 обновлён 2026-11-16
npx skills add sno-ai/sno-station-skills --skill join-talk -a claude-codeЧто делает join-talk
Скилл регистрирует уже открытый диалог агента в Reach для получения карточек, вызовов и сигналов пробуждения. Он запускает скрипт scripts/join-talk.sh из рабочего репозитория и выводит адрес зарегистрированного диалога. Новый агент при этом не запускается.
Для работы нужны sno с Reach runtime, jq, flock и Reach версии 2.0 или выше. Регистрация требует shell-инструмент. Повторный запуск из того же терминала не меняет регистрацию. Чтобы связаться с другой машиной, на обеих должны работать процессы приёма Reach и быть настроены взаимные контакты.
Для ручного запуска нужен доступ к shell в рабочем репозитории. Cursor IDE-чат регистрируется по идентификатору диалога; у других вручную открытых агентов используется обнаруженный входной endpoint терминала. Если терминал не принимает ввод, Reach можно запустить через sno reach terminal -- <agent command>.
Какие задачи решает
- зарегистрировать текущий диалог агента в Reach
- получить адрес для карточек и вызовов
- подключить вручную открытый агент без
SNO_EXECUTOR_ADDR
Примеры запросов агенту
- Подключи текущий диалог к Reach, чтобы ему можно было отправлять сообщения.
- Зарегистрируй этот терминал для вызовов и сигналов пробуждения.
- Сделай вручную открытого агента доступным в Reach.
Как установить join-talk
1Через Skills CLI (Vercel)
npx skills add sno-ai/sno-station-skills --skill join-talk -a claude-code2Вручную: положить файлы
~/.claude/skills/skill/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/skill/
1Через Skills CLI (Vercel)
npx skills add sno-ai/sno-station-skills --skill join-talk -a codex2Вручную: положить файлы
.agents/skills/skill/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add sno-ai/sno-station-skills --skill join-talk -a cursor2Вручную: положить файлы
.cursor/skills/skill/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install sno-ai/sno-station-skills skills/S-communication-and-handoff/join-talk/skill2Вручную: положить файлы
.github/skills/skill/SKILL.md1Через Skills CLI (Vercel)
npx skills add sno-ai/sno-station-skills --skill join-talk -a gemini-cli2Командой платформы
gemini skills install https://github.com/sno-ai/sno-station-skills --path skills/S-communication-and-handoff/join-talk/skillВручную: положить файлы
.devin/skills/skill/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Через Skills CLI (Vercel)
npx skills add sno-ai/sno-station-skills --skill join-talk -a opencodeClaude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о join-talk
Как установить join-talk в Claude Code?
Выполни npx skills add sno-ai/sno-station-skills --skill join-talk -a claude-code. Файл скилла появится по пути ~/.claude/skills/skill/SKILL.md.
Что делает join-talk?
Он добавляет текущий диалог и терминал в Reach, чтобы они могли получать карточки, вызовы и сигналы пробуждения. Скилл не создаёт нового агента.
Что нужно для работы join-talk?
Нужны sno с Reach runtime, Reach версии 2.0 или выше, а также jq, flock и shell-инструмент.
Исходный текст
SKILL.md · Apache-2.0
---
name: join-talk
description: "Register this agent and terminal with Reach for cards, calls and wake-ups. Use when asked to join, connect, or become reachable, or when a manually opened agent lacks `SNO_EXECUTOR_ADDR`."
requires:
programs:
- {name: reach, min_version: "2.0"}
harness:
- {slot: 4.shell, need: required}
---
# join-talk
Needs: `jq`, `flock`, and the `sno` CLI with its Reach runtime. Ordinary terminals on macOS,
Linux and Windows WSL are discovered by their input endpoint; there is no terminal-brand allowlist.
Reach offers **Instant Messenger** for a response now and **Agent Email** for saved
messages or tasks handled later. Join Talk registers this existing conversation for both;
it does not start a replacement agent. See the `reach` skill for choosing commands.
Reach is the messaging layer between agents: a seat is one registered conversation with an
address, a card is a stored message, and a ring is the wake-up that asks the agent to read its inbox.
`SNO_EXECUTOR_ADDR` is the environment variable holding that address for agents opened through Reach; a
manually opened agent has none, which is what this skill fixes.
Run this once, from your own shell tool, in the repository you are working on. The script
ships beside this file:
```bash
bash scripts/join-talk.sh
```
(Give the full path of this skill's `scripts/join-talk.sh` under whichever skills root your
harness loaded it from.)
It prints one line, `joined <address>`. Tell the person that exact address, then go back
to what you were doing. Rerunning it from the same terminal changes nothing. The seat is
registered wherever agents on this machine are addressed, so cards, rings and a handoff find
this conversation. Instant Messenger can use threaded mail replies for supported local
and cross-machine calls; it does not always need terminal output capture.
A Cursor IDE chat has no terminal: it is registered by its conversation id (channel `cursor-ide`), and a
card reaches it when its turn ends. Other manually opened agents use their discovered terminal input
endpoint. Codex uses its native message queue when available, independently of the terminal.
For another machine, registration alone is not connection setup. Both machines need
Reach's receiving process and reciprocal contacts (`network` and `peer` in the installed
help). Once configured, give the caller this conversation's exact returned address.
Preserve any collision suffix. Do not promise receipt merely because registration succeeded.
On macOS, Ghostty can also receive input through its scripting interface without a restart.
`sno reach terminal -- <agent command>` gives Reach its own input endpoint in any terminal, including
Ubuntu and Windows WSL, without requiring tmux. Use it when the operating system refuses input into
an already running terminal; preserve the existing conversation with the agent's resume command.
Explain an observed failure and its remedy, never reject an unfamiliar terminal name.
Options, only when the person names them: `join-talk.sh review.example-repo@host1` picks the address;
`--name "Mac Coder"` picks the display name and derives `maccoder.agent@<host>`.
The display name is preserved. The call name is lowercased and removes whitespace and characters
outside Reach's address alphabet (letters, digits and hyphens). Without `--name`, the repository
name supplies the display name. Another terminal using the same call name gets a numeric suffix,
such as `maccoder-2.agent@<host>`. An explicit address is used as given.
## After joining
- A card for you arrives with a ring in this terminal. Read it with
`sno reach inbox --as <address>`; reading does not accept it.
- Answer a `[CALL]` that requests mail with `sno reach reply --as <address> --card <card>`,
body on stdin and no `--state`. For task mail, use `--state accepted` before doing the
work, then `--state completed` or `failed`. The installed Reach guide gives the full lifecycle.
## When it refuses
- `terminal discovery failed` or `no terminal input endpoint` — inspect the actual Reach error.
A detached shell may have no controlling terminal. Use an agent session endpoint when available,
or start/resume the agent with `sno reach terminal -- <agent command>` and register there.
- A failed wake is not a failed mail delivery. Keep the original card and fix the named input
failure; never resend the card or claim the recipient read it merely because input was accepted.
- `sno is missing` — the machine lacks the Reach install (`sno setup` installs it). Tell the
person; do not retry.
- `jq is missing` or `flock is missing` — install it (`flock` comes from util-linux), then run it again.
- `ORCA_TERMINAL_HANDLE is empty` — an Orca shell without a terminal handle; Reach cannot
address it. Tell the person; do not retry.
© sno-ai · Apache-2.0 · sno-ai/sno-station-skills