run · insilico-org, analyst — скилл для Claude Code: анализ гипотезы
Скилл run для Claude Code проводит гипотезу через предварительную регистрацию, анализ и отчёт. Запускается после выбора гипотезы исследователем и получения возражений PLSI Challenger.
MIT ★ 93 обновлён 2026-11-15
npx skills add Insilico-org/plsi --skill run -a claude-codeЧто делает run
Скилл регистрирует выбранную гипотезу и версию выпуска данных в Longevity Mothership, затем запускает анализ с неизменённой спецификацией. Для работы нужны команды plsi mothership и локальный выпуск данных. Файл release.json нельзя читать до получения квитанции о регистрации.
После анализа скилл передаёт результат на проверку PLSI Challenger, а затем формирует вывод с интервалом эффекта, размером выборки, p-значением и возражениями. Нулевой результат и сбой тоже передаются; группы нельзя расширять, а спецификацию или выпуск менять можно только через новую регистрацию. Самостоятельно отправлять файлы скилл не должен: их передают Data Controller.
Какие задачи решает
- зарегистрировать гипотезу и спецификацию до анализа
- повторить анализ на той же версии выпуска данных
- передать результат и материалы PLSI Challenger
- составить вывод с учётом возражений и нулевого результата
Примеры запросов агенту
- Проведи выбранную гипотезу через регистрацию, анализ и отчёт для PLSI.
- Зарегистрируй спецификацию, дождись квитанции и выполни анализ без изменений.
- Подготовь вывод с возражениями PLSI Challenger, включая нулевой результат.
Как установить run
1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill run -a claude-code2Вручную: положить файлы
~/.claude/skills/run/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/run/
1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill run -a codex2Вручную: положить файлы
.agents/skills/run/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill run -a cursor2Вручную: положить файлы
.cursor/skills/run/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install Insilico-org/plsi skills/analyst/run2Вручную: положить файлы
.github/skills/run/SKILL.md1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill run -a gemini-cli2Командой платформы
gemini skills install https://github.com/Insilico-org/plsi --path skills/analyst/runВручную: положить файлы
.devin/skills/run/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Claude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о run
Как установить run в Claude Code?
Выполни npx skills add Insilico-org/plsi --skill run -a claude-code. Файл скилла будет доступен по пути ~/.claude/skills/run/SKILL.md.
Что делает скилл run?
Он регистрирует выбранную гипотезу, запускает анализ на зафиксированной версии выпуска данных, передаёт материалы на проверку PLSI Challenger и формирует вывод. Сбои и нулевые результаты тоже попадают в отчёт.
Что нужно для работы run?
Нужны команды plsi mothership и локальный выпуск данных. Анализ начинается только после квитанции о предварительной регистрации.
Исходный текст
SKILL.md · MIT
---
name: run
description: Use as PLSI Cohort Analyst when the researcher picked a hypothesis - preregister it with the Longevity Mothership, run the identical analysis on the data release on this computer, and write the finding, null results included, for PLSI Challenger and PLSI Data Controller.
---
# PLSI preregister, run, report
**Status: draft**. The numbers come only from `plsi mothership analyze`;
the Mother reruns the same spec on the same release and must get the same result.
## When to use
- PLSI relays the researcher's pick from `analyst/hypothesize` (thread and `hypotheses.json` in `files`).
- PLSI relays the preregistration receipt, then Challenger's objections.
## Steps
1. **Preregister.** Check the budget line in the request `summary` ("Cohort Analyst analyses: <m> of <n>, <month>";
m < n, else a `result` "budget used"). The catalog carries no release version, so fetch the latest release and take only the `version` from the
command's output (it reports the version and the cell count, not the values):
```bash
plsi mothership release --version latest --out <PLSI_HOME>/work/<thread>/release.json
```
Never open or read `release.json` before the preregistration receipt arrives: the hypothesis and spec were fixed
without the values, and they stay that way. Write the picked hypothesis, that release version, the spec, the
outcome, `alpha`, `direction` and `parents` to `<PLSI_HOME>/work/<thread>/prereg-input.json`, then:
```bash
plsi mothership prereg --spec <PLSI_HOME>/work/<thread>/prereg-input.json
```
It writes the gate-checked message (its `data` names the file). Return that file for Data Controller
(`controller/egress`, kind "preregistration") and stop until PLSI relays the receipt. No receipt, no analysis.
2. **Run** on the preregistered release with the preregistered spec, unchanged (`release.json` from step 1 is
that release; fetch it again by version only if it is missing):
```bash
plsi mothership release --version <release> --out <PLSI_HOME>/work/<thread>/release.json
plsi mothership analyze --release <PLSI_HOME>/work/<thread>/release.json --spec <PLSI_HOME>/work/<thread>/spec.json
```
`spec.json` is the preregistration's `analysis`, copied unchanged; save the output as `result.json`.
`analyze` fails with `TOO_FEW_CELLS` or `DEGENERATE_CELLS`, or a coordinate is missing: return a `result` to PLSI
with the code and the preregistration id. That is the report; it does not go to Challenger or `finding`, and the
groups are never widened to make it run.
3. **Challenge.** Save the findings ledger (`plsi mothership findings`) as
`<PLSI_HOME>/work/<thread>/ledger.json`. Return one `result` with the preregistration message file, `release.json`,
`spec.json`, `result.json` and `ledger.json` in `files` and the work for Challenger (`challenger/challenge`, Claim mode). Wait for PLSI to relay the objections.
4. **Finding.** Write the summary: the effect with its interval, n, p against the preregistered `alpha` and
direction, the multiple-testing load, Challenger's objections as written, and the grade "observational,
self-selected cohort, hypothesis-generating"; no dates, links or id numbers (the gate refuses them). The gate
reads any run of 8 or more digits and separators as an id number, so round every number in the summary to 2-3
significant digits ("effect -1.2 (95% CI -2.1 to -0.37), n 46, p 0.012"); the exact numbers travel in the
finding's numeric `result`. Paraphrase an objection that quotes a long number. A null or
contrary result is written the same way. The command reruns the preregistered analysis itself, so the
finding's numbers are the code's:
```bash
plsi mothership finding --prereg <preregistration message file> --release <PLSI_HOME>/work/<thread>/release.json --summary "<summary>"
```
Return the finding file for Data Controller (`controller/egress`, kind "finding"); PLSI shows a `cleared` one on
one approval card and Data Controller sends it.
## Rules
- One preregistration, one analysis: a changed spec, group or release is a new preregistration.
- Every run is reported, failures and nulls included; never drop or retry an analysis because of its result.
- Never send anything yourself, never edit the release or the result, and never put a person, an instance or the
contributor code in any file.
© Insilico-org · MIT · Insilico-org/plsi
Похожие скиллы
Каталог скиллов SKILL.md →Сначала — run от других авторов.