roster — скилл для Claude Code: учёт пациентов и установка
Скилл roster для Claude Code ведёт список пациентов врача и отмечает статус каждого. Он включается при добавлении, паузе, закрытии или удалении пациента, а также когда пациент поделился данными.
MIT ★ 93 обновлён 2026-11-15
npx skills add Insilico-org/plsi --skill roster -a claude-codeЧто делает roster
Скилл ведёт реестр пациентов врача в roster.json: хранит метку, статус и список переданных данных. Он обрабатывает запросы о составе панели и изменения статуса, а после обновления реестра запускает plsi clinic dashboard, если существует файл панели.
Для нового пациента скилл запрашивает метку, согласие на передачу данных и сведения о поле и годе рождения, затем передаёт задачу Data Processor через PLSI. Общие файлы он не открывает: PLSI направляет их боту отделения пациента. Нужна роль врача; собственные данные врача и данные членов семьи не входят в панель.
Метки должны быть нейтральными, например patient-07; имена и номера записей в них запрещены. При удалении данных скилл ждёт результат Memory Hole и лишь затем убирает строку из реестра.
Какие задачи решает
- вести список пациентов и их статусов
- добавлять пациента после подтверждения согласия на передачу данных
- приостанавливать или закрывать запись пациента
- удалять строку после подтверждения удаления данных
Примеры запросов агенту
- Покажи, кто сейчас в моей панели пациентов.
- Добавь пациента с меткой
patient-07; пациент согласился передать присланные данные. - Приостанови пациента
patient-07.
Как установить roster
1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill roster -a claude-code2Вручную: положить файлы
~/.claude/skills/roster/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/roster/
1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill roster -a codex2Вручную: положить файлы
.agents/skills/roster/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill roster -a cursor2Вручную: положить файлы
.cursor/skills/roster/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install Insilico-org/plsi skills/panel/roster2Вручную: положить файлы
.github/skills/roster/SKILL.md1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill roster -a gemini-cli2Командой платформы
gemini skills install https://github.com/Insilico-org/plsi --path skills/panel/rosterВручную: положить файлы
.devin/skills/roster/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Claude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о roster
Как установить roster в Claude Code?
Выполни npx skills add Insilico-org/plsi --skill roster -a claude-code. Файл скилла находится по пути ~/.claude/skills/roster/SKILL.md.
Что делает roster?
Скилл ведёт реестр пациентов врача, меняет их статусы и передаёт PLSI задачи по новым или удаляемым записям. Общие файлы пациентов он не открывает.
Что нужно для работы roster?
Нужна роль врача и PLSI. Для обработки новых пациентов скилл передаёт задачи Data Processor, а удаление данных выполняет Memory Hole через PLSI.
Исходный текст
SKILL.md · MIT
---
name: roster
description: Use as PLSI Panel when the physician adds, lists, pauses, closes or removes a patient on their panel, or a patient shared their PLSI data with the physician - keep the roster (one row and one instance per patient) and the status of each.
---
# PLSI patient roster
**Status: draft**. The user here is a physician; a patient is a person who
chose to send the physician their data.
## When to use
- A patient shared data with the physician (a PLSI export, records, a letter, mail to the `+patients` address), and
PLSI saved it unopened.
- "Who is on my panel?", "add a patient", "pause / close / remove <label>".
- Not for the physician's own health (their `self` instance) or family members.
## Steps
1. **Role and panel.** Only for the physician role; anything else: a `result` "the panel is for the physician role".
```bash
plsi role show
plsi instances list
```
The panel is `<PLSI_HOME>/work/panel/roster.json` alone, one row per patient (each patient's instance has relation
`other`, but an `other` instance with no row, such as a friend the physician tracks, is not a patient):
`{"label": "patient-07", "status": "active|paused|closed", "shared": ["labs", "plans"], "since": "2026-10",
"last_update": "2026-10"}`, plus `"inbox"` and `"shared_folder"` Drive folder ids once `panel/clinic` set them
up (`"shared"` stays the list of what the patient shared), `"patient_access"` (`none` until the patient is invited,
then `shared`) with `"patient_id"` (the invited person's Drive permission id, never their address), and
`"reviewed"` (the as-of date of the last report the patient received); `plsi clinic` commands write these.
Labels are neutral (`patient-07`), never names, initials or record numbers: the patient sees theirs in their
Drive folders. The optional `"handle"` is the physician's own name for the patient, shown to the physician as
"JD (patient-07)": a first name, initials or nickname, at most 40 characters, never a full name, record number or
birth date, and never another patient's handle or label (`plsi clinic check` refuses a roster where two
patients could be confused, ignoring case, spaces and dots). It stays in the roster and the physician's chat:
never in a Drive folder name, a report, a message,
a handoff to another bot or anything that leaves.
2. **Whose files.** Never open the shared files. Files or mail with no label yet: ONE `question`, a patient on the
roster (the labels with handles) or a new one. A roster patient: return a `result` naming the label; PLSI hands
the files to that patient's ward bot.
3. **New patient.** Put in ONE `question`: the label to use, a handle if the physician wants one (with three random
two-word suggestions such as "amber fox"), sex and birth year (or none), and the physician's confirmation that
the patient agreed to share exactly what was sent. After the `answer`, return a `result` with the work for Data
Processor (via PLSI): `init` with `--relation other` for the new label, in a request that names the physician's
own instance (`shared/team`, The instance exists first). Add the row once Data Processor's `result`
arrives, and return the work for PLSI: the file paths for `processor/intake` on the new label (a ward bot is made
later, on request, `clinic/ward`).
4. **Pause, close or remove.** Pause and close change the row only. Deleting a patient's data is Memory Hole's
(`memoryhole/forget`, through PLSI, on the physician's explicit words); it deletes the patient's instance and the
panel reports and work files naming the label. Say so in the `result`, and remove the row from `roster.json` only
once Memory Hole's `result` arrives (relayed by PLSI); then return the work for PLSI: remove the ward bot,
if the patient has one (`clinic/ward`).
5. After any change to `roster.json`, when `<PLSI_HOME>/work/clinic-dashboard/dashboard.html` exists, run `plsi
clinic dashboard` (`panel/clinic` step 6).
6. **Return one `result`**: the roster (label, status, shared, since, last update, open plans from `plsi status
--instance <label>`) and what changed.
## Rules
- Patient data enters only from what the patient chose to send; never look for more.
- Never contact a patient (that is `liaison/message`), never record anything yourself, never move data between
instances. Patient instances are never sent to the Longevity Mothership.
- A handoff about one patient names that patient's instance; a panel-wide one names the physician's own and lists the
labels in `summary`.
© Insilico-org · MIT · Insilico-org/plsi