rigs — скилл для Claude Code: запуск команды агентов

---
name: rigs
description: Use when a person in their own Claude Code or Codex session mentions OpenRig, rigs or the rig command, or wants a team of coding agents (Claude Code, Codex) on their project. That includes installing, setting up, starting or updating OpenRig, seeing, getting back to or re-attaching to their OpenRig agents (including bringing a stopped team back), TUI or operator, starting or sharing a team, and joining this session to one. Operating a running rig from inside it (fleet recovery, seat handover, watchdog wakes, in-rig upgrades) is the openrig-skills skill.
---

# rigs: your route into OpenRig

OpenRig runs a team of coding agents (Claude Code, Codex and others) side by side in tmux. A local daemon keeps their
tasks, messages and state, so the team keeps working across restarts. This skill gets OpenRig installed, gets a team
working on what the person wants, and shows how to work with that team from here.

**The goal is a team doing the person's work, not just an install.** Go through the steps in order and stop early only
if the person asks you to. When they say what they want built, give it to OpenRig's operator (step 2) instead of
building it yourself.

Tell the person what you're about to run and why before you run it. Don't install system packages or change their
machine without a yes, and don't start a team, including `rig up`, without their yes to what it will start; a yes they
already gave for that same launch counts, so don't ask twice. Starting OpenRig and a team writes files: Codex hooks and settings in
`~/.codex/config.toml`, Claude Code workspace trust in `~/.claude.json`, discovery skills in `~/.claude/skills` and
`~/.agents/skills`, and, in the repository, managed guidance in `AGENTS.md` or `CLAUDE.md`, activity hooks in
`.claude/settings.local.json` and a status line there unless the project already has its own, plus the team's skills
and plugins. Unless a permission policy, a per-seat choice or (for Codex) a named profile applies, the kernel's own
seats run with an operational default: Codex with `-s danger-full-access -a never`, and Claude Code with its file
tools, web fetches and operational commands, including reads under the home folder, allowed without asking. Say so
before you start OpenRig ([the full list](https://github.com/mvschwarz/openrig#what-openrig-changes-on-your-machine)).

When you give the person a file or a command to run in their own terminal, use a path that exists on their side. A
file a sandboxed agent writes under `/tmp` may not exist in the person's terminal (seen with Codex), so put files the
person needs in their project or home folder and name that path.

## 1. Install OpenRig, if it isn't installed

- **Check first:** `rig --version`. If it prints a version, go to step 2.
- **What it needs:** macOS or Linux, Node.js 22 or 24, tmux, and Claude Code or Codex signed in. Check only what's
  missing: `node --version`, `tmux -V`, `claude auth status` or `codex login status`.
- **A check that needs the network** (`gh auth status`, a registry or other fetch) can fail falsely in a sandbox without
  network access, such as Codex's default one. Re-run that one command with network access before you tell the person
  to sign in again or fix anything.
- **Install:** `npm install -g @openrig/cli`, then `rig setup --providers codex` (or `claude`, or `both`: the harness
  the person uses). Setup checks Node, tmux and the logins. It installs tmux (with Homebrew, when present) or the chosen
  harness (with npm) if either is missing, installs Herdr for the OpenRig view unless they decline it (`--no-herdr`),
  and adds an OpenRig block to `~/.tmux.conf`, so say all of that first. It doesn't start the daemon. Then `rig doctor`.
- **Then go on to step 2:** say it's installed and ask what they want worked on, and in which repository. A plain
  "install OpenRig" includes this. Stop here only if they say not to start a team.
- **If something fails:** `rig context get help` is the help guide for the installed version. If `rig` itself won't
  run, use https://www.openrig.dev/help/agents. Getting started: https://openrig.dev/docs/getting-started

## 2. Open OpenRig and give its operator the goal

- **Start OpenRig:** `rig daemon status`, and `rig daemon start` if it isn't running. `rig preflight` and `rig doctor`
  don't start it. Starting it also starts OpenRig's own team, the kernel, whose operator sets up the person's team.
  Keep it.
- **If the person uses Codex:** now that OpenRig is running, make the one-time offer under "Codex: one offer, once,
  after OpenRig starts" at the end of this step.
- **Show them OpenRig, the handoff:** once OpenRig is running, open the OpenRig TUI and operator for the person. Say
  you're opening it, then run `rig terminal open saved:kernel --window` on the daemon's desktop. This is the next step
  after installing or starting OpenRig, and the way back whenever they want their agents or OpenRig again. Don't wait
  to be asked or for particular words. If they've said not now, give them that command for later. It opens a view
  itself, using herdr when installed or plain tmux otherwise:
  - **Inside Herdr** (you run in a Herdr pane): it switches the person's Herdr to an `openrig kernel` space, reusing a live
    one. No new window and no macOS prompt; their own spaces stay in the sidebar.
  - **Inside Rex** (you run in a Rex block, or in a tmux started in one): it opens an `openrig kernel` session on the same Rex server and asks the
    Rex app to switch to it. No new window and no macOS prompt. Opening it again adds a numbered session.
  - **In Terminal or Ghostty:** a new tab or window the size of theirs.
  - **From Claude Desktop, iTerm or VS Code on a Mac:** a new Ghostty window when supported, otherwise Terminal. Only
    here, tell the person before running it that **Allow is fine** if macOS asks to control that app.
    `echo $TERM_PROGRAM $__CFBundleIdentifier $REX_BLOCK` tells you where you run. `herdr`, `rex`, `Apple_Terminal` or
    `ghostty`, or `tmux` with `com.apple.Terminal`, `com.mitchellh.ghostty` or a `REX_BLOCK` value, mean no macOS
    prompt, so don't mention one. `tmux` with anything else (iTerm, VS Code) can prompt, so say Allow is fine first.
  - **Layout:** under 120 columns the operator fills the first page; from 120, the dashboard and operator share it. The
    advisor has its own tab or tmux window.

  Then tell the person in a sentence or two where it opened and that the operator is ready for what they want to
  build. Don't list agents or statuses (the TUI shows them), and don't suggest a command for them to type.
  Preserve the current terminal. If OpenRig's notes say it couldn't confirm the view, say so plainly. If it's already
  open, point them to it rather than opening another. Only if the window cannot open, `rig tui --shared` is the
  dashboard-only fallback; explain the failure and help with the chosen fallback. Herdr is visible only in a terminal
  the person can see; switching the shared TUI to `:terminals` does not open one. No and headless/SSH use are valid
  background outcomes. Provider-only `--provider herdr`, `--provider cmux` or `--provider rex` is for an existing provider workspace,
  not the first desktop window.
- **If the window can't open, or over headless SSH:** say plainly that no visible terminal was opened, and ask the
  person to open a new terminal window or tab on the daemon's host. Over SSH, that's a new SSH session to it with the
  known account. If you only know an HTTP daemon address, ask for the SSH details rather than inventing them. Then
  give them one complete command:
  - **The command OpenRig printed:** when `rig terminal open saved:kernel --window` can't open a window, it says why
    and ends with `run:` and a command (the `error` field with `--json`). That command already names the installed
    herdr binary and the daemon's socket, or the conversation to attach. Relay it exactly rather than composing one.
    If a note asks you to place the view once Herdr starts, run that `rig terminal open` yourself after they start it.
  - **If it printed no command:** find `operator.agent` in
    `rig ps --nodes --rig kernel --json --fields logicalId,canonicalSessionName,tmuxAttachCommand` and give
    `env -u TMUX` followed by its `tmuxAttachCommand`, exactly as listed (never a guessed name), for the operator's
    conversation. That command names the daemon's tmux server when it isn't the default one.

  For any other failure, the table under "What can interrupt installation and the OpenRig view" in
  `rig context get reference/getting-started.md#open-the-kernel-conversations` says why and what to do next.
- **Offer to join this session before the first send:** if this session hasn't already joined, recommend joining
  OpenRig in a plain shell so the operator sees a named teammate instead of "unknown sender". Inside tmux, offer
  joining as optional, with the effects below. Ask the person yes or no after this short explanation:
  - This adds me as a named member of the team, with my name on messages.
  - In a plain shell, joining writes no files in your project or personal settings.
  - Inside tmux on 0.6.11, my sender and reply address is your existing tmux session name, even a number like `0`.
    `rig attach --self` returns that address and `rig whoami` confirms it; `--display-name` does not change it.
  - Inside tmux, other agents can type into this window, and stopping the team (`rig down`) also closes this tmux
    session (both from source, not hand-tested). Transcript recording and, for Claude Code, writing
    `.openrig/context-collector.cjs` and `.claude/settings.local.json` for the status line were hand-tested on 0.6.11.
    Updating an existing `.claude/settings.local.json`, keeping its custom status line, is from source.
  - In a plain shell, other agents reply through the task queue because they can't type into this window, and
    stopping the team leaves this session running.

  Attach only on their yes; if they decline, continue the operator handoff. For this first contact, use the kernel's
  rig ID (the `rigId` of the `kernel` row in `rig ps --json`) and its `operator` pod:
  `rig attach --self --rig <rigId> --pod operator --member person-agent --runtime <claude-code|codex> --print-env`.
  `--node <logicalId>` binds to an existing seat instead. Attach once, and keep the variables it prints
  (`OPENRIG_NODE_ID` and `OPENRIG_SESSION_NAME`). Each command may run in a fresh shell, so put them in front of every
  later `rig` command. Check with `rig whoami --json`, and use it or `rig seat status` later for identity and state,
  not `rig attach --json` output. Don't print `OPENRIG_ACTIVITY_*` values: they're credentials.
  If they decline, a message that must still say who it's from can go as a queue item with a declared source,
  `rig queue create --source <their id>@external --destination <seat> --summary "<one line>" --body-file <file>`: the
  seat sees that name, recorded as declared, and can reply to them if they're registered (`rig gateway human list`).
  A declared name is a claim, not a seat's own identity: for a team that acts only on seat identity, the attached
  shell above is the route.
- **Give the operator the goal:** ask what they want worked on, in which repository and on which branch, unless they've
  said. Find the `operator.agent` row in `rig ps --nodes --rig kernel --json`, take its `canonicalSessionName`
  (never the logical ID or a guessed name) and send:
  `rig send <canonicalSessionName> 'This is the agent that installed OpenRig. The person will answer in your pane. Goal: <goal>. Project folder: <absolute path>. Branch: <branch>.'`
  If the person stays here, replace "The person will answer in your pane" with "The person stays with me; send me your questions and
  results to relay." Carry their constraints and any declined permission choices in either handoff.
  Or the person types the goal and folder in the operator's pane. If they give you a goal later, forward it the same
  way. The operator helps them pick a team that fits their logins, starts it (`rig up`) only on their yes to the plan it
  shows, and gives the goal to the team's lead. Before that yes, it says what launching into their folder changes for their own agent there; relay
  that with the question. Show them where the operator answers, and don't build the project yourself.
- **Relay the operator's questions** unless the person declined the Codex offer below and explicitly chose the operator route: the operator asks in its own pane, and the person may not be looking there.
  After each step you hand it, read its screen with `rig capture <canonicalSessionName>`. When it asks the person
  something (start this team? which folder? which option?), ask them here in the operator's words and send their
  answer back with `rig send`, or tell them to answer in the operator's pane. Unlike a prompt or a menu, a question
  doesn't show up as a stopped seat, so don't leave it to a background wait.
- **Installation is finished** when the operator is ready and the person is talking to it; a healthy daemon alone isn't
  that. If they'd rather talk later, keep that choice, leave them the exact connection step and say the handoff to the
  operator is still pending.
- **See what's running:** `rig ps`, then `rig ps --nodes --rig <rig>` for a team's agents. If a team is already
  running in that repository, tell the operator.
- **Check it's ready before you say so:** `rig ps --nodes --rig <rig>`. If an agent is stopped at a prompt or a menu,
  read it with `rig capture <seat>@<rig>`. A permission prompt is the person's to answer: show it to them, with any
  others waiting, one line each (seat, exact action, the choices offered). Before sending their choice, capture that
  seat again: if its prompt changed, don't reuse the answer. Then send exactly the choice they made for that prompt
  (`rig send --help` says how to send a digit, a letter or Escape to a prompt). A yes to one prompt isn't a
  yes to the next, and never pick a "don't ask again" choice they didn't pick. If they've told you outright to decide a
  kind of future prompt (say, "approve prompts that only write inside my project"), you may decide each one: read its
  whole action, answer only when it's clearly inside what they said, and tell them you answered under that instruction,
  not that they said yes. Bring anything unclear or outside it back to them; a command's name or a path that looks like
  their project doesn't show what the action touches. Their instruction changes no permission setting.
  Another kind of menu you can answer with
  the key that screen shows, or ask the person. Capture it again before sending anything more.
- **Replies:** in a plain shell, other agents can't type into this session. Read work sent to you with
  `rig queue list --destination <your address>` and `rig queue show <id> --full`, and read an agent's screen with
  `rig capture <seat>@<rig>`.

### Codex: one offer, once, after OpenRig starts

First the agent resolves the person's real Codex folder (`CODEX_HOME`, or `~/.codex` when that isn't set) and puts the exact path in the
offer, so the person sees the real file, not a placeholder:

> Codex asks you to approve OpenRig commands. May I let six of them run without asking: `rig ps`, `rig capture`, `rig send`,
> `rig queue`, `rig status` and `rig whoami`, each with whatever follows it? They would run outside Codex's sandbox, in every Codex
> project and session you run on this computer, and `rig send` and `rig queue` can message your agents and change their task records, not
> only read them. I'd add one file, `/home/you/.codex/rules/openrig.rules` (the resolved path). Codex reads it when it starts, so it
> applies from your next Codex session; it won't remove prompts in this one. Keeping individual approvals means even status checks
> and reading an agent's screen may ask each time. You can also talk directly to the operator once it is ready,
> without changing this Codex session's permissions. To undo the rules, ask me to remove the OpenRig rules this added and keep your other rules.

- **No, or no answer:** write nothing and keep their sandbox, network and approval settings. If they decline, honor that choice;
  don't keep offering remembered approval or turn on general network access to avoid the prompts. Offer to continue directly with
  the ready operator, or stay here with individual approvals. If they already chose either route, don't ask again.
- **If they choose the operator:** use the handoff above once, carrying their goal, folder, branch and declined permission choices,
  then point them to its ready conversation. Over headless SSH, use the exact connection/attachment command above. Once they are
  talking to the operator, it follows the team's work and reports the result there; stop this installer's repeated capture/status/queue
  polling. Don't stop, restart or reconfigure either session. If they prefer to stay here, continue relaying with the approvals they chose;
  don't claim those prompts are gone. The rules offer is optional, not a condition of using OpenRig.
- **Yes:** the agent applies it the way OpenRig's existing permission steps already describe (`applying-a-permission-policy`, in the
  installed OpenRig skills): read the existing rules first, keep any stricter rule, change no sandbox or approval setting, and record what
  it added. The file is created only if it doesn't exist; if it does, the agent changes nothing and says what's there. A new file holds
  exactly these two lines:
  ```
  # Added by OpenRig on the person's yes: these six rig command families run without a prompt. Ask to undo, or delete this file if it holds nothing else.
  prefix_rule(pattern = ["rig", ["ps", "capture", "send", "queue", "status", "whoami"]], decision = "allow", justification = "OpenRig coordination commands the person approved once")
  ```
- **Undo** (the same skill's words: "Undo the OpenRig command allowances added by this setup; keep my other rules"): the agent removes
  only the lines it recorded adding, keeps anything else in the file, and deletes the file only if it still holds nothing but those lines.
  It applies from the next Codex session.

## 3. Follow the work to its result

Follow these steps by default. Only when the person declined the Codex offer above and explicitly chose the operator route does the operator own this follow-through.

- **Find the team's task:** the operator gives the goal to the team's lead as a queue task: `dev-build@starter`, or
  `orch-lead` in `workshop` and `factory` (for starter and factory, `rig specs preview <name> --kind rig` says what
  each seat does; for a running team, `rig ps --nodes --rig <rig>`). Find it with
  `rig queue list --destination <seat>@<rig> -a`.
- **Follow it to the result:** a task that changed hands isn't finished. `rig queue show <id> --full` names the seat it
  went to, and that seat's next task is the one whose `handedOffFrom` is that ID
  (`rig queue list --destination <seat>@<rig> -a -o json`). Follow each handoff until an agent reports the result, and
  use `rig capture <seat>@<rig>` to see what it's doing. Then read what it produced and tell the person what the team
  actually did (the branch, commit, review or PR text), not just that you sent it.
- **Give the team more work:** write the goal to a file: what to change, in which repository and branch, what done
  looks like, and that the result comes back to you (the branch or commit, the review, any PR text). Then
  `rig queue create --source <your name> --destination <seat>@<rig> --summary "<the goal in a sentence>" --body-file <file>`, and tell that agent with
  `rig send <seat>@<rig> "task <id> is yours"`. A message informs, and a queue task is the work someone owns.
  `--source` names you when this session hasn't joined the team.
- **Then ask what's next.** If no team can take the work, fix that or ask the person. Don't quietly do it yourself.
- **Other ways to work with the team:** `rig send <seat>@<rig> "..."` types into an agent's terminal,
  `rig capture <seat>@<rig>` reads its screen, and `rig ps --nodes --rig <rig>` shows who's on it.

## 4. Find out more

- **How OpenRig works:** `rig context profile world-public --situation fresh`.
- **What you can do:** `rig context get onboarding-width` (the capability map).
- **Everything in the library:** `rig context list`.
- **Exact syntax:** `rig <command> --help` is always current for the installed version.

When something here and `rig <command> --help` disagree, `--help` wins.