feedback — скилл для Claude Code: отчёты и установка
Скилл feedback для Claude Code собирает отчёт о работе с PLSI и отправляет его команде. Он включается по просьбе оставить отзыв, после настройки PLSI и в еженедельном цикле обратной связи.
MIT ★ 93 обновлён 2026-11-15
npx skills add Insilico-org/plsi --skill feedback -a claude-codeЧто делает feedback
feedback собирает из чата и журналов PLSI замечания, предложения и оценку времени по этапам. Отчёт проходит проверку через plsi feedback report, после чего скилл показывает его пользователю и спрашивает разрешение на отправку. Без ответа Send письмо не уходит.
Для отчёта нужны PLSI и его команды plsi feedback timeline и plsi feedback report; перед отправкой данные проверяет Data Controller. Письмо уходит с Grok-почты пользователя на адрес обратной связи PLSI, а если адрес не задан, скилл сохраняет отчёт без отправки. В отчёт не включаются личные данные и содержимое медицинских записей.
Какие задачи решает
- собрать замечания о настройке PLSI из переписки
- оценить время, потраченное на этапы работы
- сформулировать предложения по улучшению PLSI
- отправить проверенный отчёт команде PLSI
Примеры запросов агенту
- Собери отчёт о том, что раздражало меня при настройке PLSI.
- Сколько времени заняли этапы работы с PLSI? Подготовь отчёт.
- Отправь команде PLSI мои замечания и предложения.
Как установить feedback
1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill feedback -a claude-code2Вручную: положить файлы
~/.claude/skills/feedback/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/feedback/
1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill feedback -a codex2Вручную: положить файлы
.agents/skills/feedback/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill feedback -a cursor2Вручную: положить файлы
.cursor/skills/feedback/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install Insilico-org/plsi skills/orchestrator/feedback2Вручную: положить файлы
.github/skills/feedback/SKILL.md1Через Skills CLI (Vercel)
npx skills add Insilico-org/plsi --skill feedback -a gemini-cli2Командой платформы
gemini skills install https://github.com/Insilico-org/plsi --path skills/orchestrator/feedbackВручную: положить файлы
.devin/skills/feedback/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Claude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о feedback
Как установить feedback в Claude Code?
Выполни npx skills add Insilico-org/plsi --skill feedback -a claude-code. Файл скилла появится по пути ~/.claude/skills/feedback/SKILL.md.
Что делает feedback?
Скилл составляет отчёт о работе с PLSI по переписке и журналам, показывает его перед отправкой и отправляет только после подтверждения Send.
Что нужно для работы feedback?
Нужны PLSI с командами plsi feedback timeline и plsi feedback report, а перед отправкой отчёт проверяет Data Controller. Для письма нужна Grok-почта пользователя и настроенный адрес обратной связи PLSI.
Исходный текст
SKILL.md · MIT
---
name: feedback
description: Use as PLSI when the user wants to tell the PLSI team how PLSI works for them - "compile a usage report", "what frustrated me in setup", "how long did setup take", "send feedback", "suggest improvements" - and at its offers (end of setup, then the weekly "PLSI feedback" routine) to write a usage report with the frustrations, the time per stage and suggested improvements, and send it from the user's Grok email to the Longevity Mothership's feedback address.
---
# PLSI usage report
The report is about PLSI, never about the user's health: it goes to the PLSI team by email, so it needs no Mothership
join and no token. Data Controller clears it before the user sees the send card (`shared/team` rule 6).
## When to use
- The user asks: "compile a usage report", "list what frustrated me", "how long did each step take", "send
feedback to the developers", "what should the devs improve?".
- **Offers**, only when "Feedback on PLSI" is in the user's Mothership choice (setup 6.7, `orchestrator/mothership`
step 1; kept in your permanent memory as "Feedback offers: on"), each as ONE short card "Help improve PLSI? I can
send the PLSI team a short report of <what>.": See the report / Not now:
- end of setup, once the record card is answered (`plsi.md` step 14): "how setup went". Right after it, create
the ENABLED weekly routine **"PLSI feedback"** (an existing one is updated to this);
- each "PLSI feedback" run: "your week with PLSI", the report built from this week's chats, thread ledgers
(`orchestrator/conduct`, `failed` rows included) and `feedback mark/timeline`. The run stays quiet when nothing
was marked that week (no stage timed, no frustration or `failed` row), or after two "Not now" in a row; then
offer again only when the user brings it up or a month after the second "Not now".
Keep the offers made and the "Not now" count in your permanent memory; a See the report resets the count. The user
can always ask.
## Steps
1. **Compile.** From this chat and the thread ledgers (`orchestrator/conduct`), write `<work>/feedback-draft.json`:
- `frustrations`: each moment the user was slowed, confused or annoyed (a question asked twice, a wait, an error,
a card that did not fit, an answer they had to correct, a step they asked to skip), as {`stage`, `what`,
`severity`}: `high` blocked or lost work, `medium` cost minutes or a retry, `low` a small annoyance;
- `suggestions`: one concrete change for each frustration that has one, and the user's own ideas, as {`stage`,
`what`};
- `stages`, optional: estimated minutes for use stages (`records`, `plans`, `research`) as {`stage`, `minutes`,
`measured`: false}; setup stages are timed by code.
`stage` is one of `install`, `team`, `choices`, `interview`, `specialists`, `connectors`, `instance`, `routines`,
`mothership`, `welcome`, `records`, `plans`, `research`, `other`. Each `what` is one plain sentence of at most 300
characters, about what PLSI did: no names, health values, record content, dates, addresses or links. At most 20
of each. Then:
```bash
plsi feedback timeline
plsi feedback report --file <work>/feedback-draft.json
```
`report` adds the timed setup stages, checks the message and writes `usage-report_<YYYYMMDD-HHMMSS>.md` (the
user's copy) and `.json` (the message). `GATE_FAILED`: rewrite the named entries and run it again.
2. **Clear.** A `request` to Data Controller (`controller/egress`) with the `.json` in `files` and "feedback report"
in `summary`. `rejected`: rewrite the entries it names and run step 1 again.
3. **Show and ask.** ONE message with the `.md` from `report` attached: the total setup time and the longest
stage, the top 3 frustrations and the top 3 suggestions, in plain words. Then ONE card "Send this report to the
PLSI team? It goes from your Grok email.": Send / Edit / Just keep it. The user asked only for the report (no
"send"): the same card. `email` is null (no feedback address set): no card; say the report is saved.
4. **Send.** Send: email `email.to`, `email.subject` and `email.body` exactly as drafted, from the user's Grok email;
one line that it went; the routine **"PLSI Mothership replies"** is created or updated by the primary hub
(another hub asks it hub to hub; `shared/hub`, Mothership replies): the Mothership's receipt or refusal arrives in the user's Grok email and wakes it. Edit: ask
what to change in one chat line, apply it to the draft, then steps 1-3 again. Just keep it: one line with the file
name.
## Rules
- Nothing is sent without the Send answer on that card; an offer is never a send.
- The report is written from what happened in PLSI, not from the user's records; a frustration that only makes sense
with health data is written without it ("a lab report was read wrong", never the value).
- Never ask the user to fill in the report: they see the result and can edit it.
© Insilico-org · MIT · Insilico-org/plsi