doppler-secret-validation — скилл для Claude Code: проверка секретов
Скилл doppler-secret-validation помогает добавить секреты в Doppler, проверить их хранение и протестировать API-аутентификацию. Пригодится перед тем, как использовать токен в проекте.
MIT 135 установок ★ 3 обновлён 2026-10-25
npx skills add terrylica/cc-skills --skill doppler-secret-validation -a claude-codeЧто делает doppler-secret-validation
Скилл проверяет формат токена до сохранения, добавляет секрет в указанный проект и конфигурацию Doppler, а затем запускает проверку хранения и извлечения. Скрипт scripts/validate_secret.py также проверяет передачу секрета через doppler run. Для теста API есть scripts/test_api_auth.py, который можно адаптировать под нужный API.
Секрет добавляют командой doppler secrets set SECRET_NAME="value" --project PROJECT --config CONFIG. Для локальной разработки можно привязать каталог командой doppler setup, после чего запускать doppler run без параметров проекта и конфигурации. Скилл советует не выводить секрет целиком и ограничивать его область действия одной командой через doppler run.
Для работы нужны Doppler CLI и доступ к проекту Doppler. Команда CLI не поддерживает --note, поэтому заметку к секрету добавляют через панель Doppler. GitHub-токены — исключение: скилл запрещает передавать GH_TOKEN и GITHUB_TOKEN из Doppler в каталог.
Какие задачи решает
- проверить формат токена перед сохранением
- добавить секрет в проект и конфигурацию Doppler
- убедиться, что секрет извлекается и передаётся через
doppler run - проверить API-аутентификацию с сохранённым токеном
- сверить секрет между конфигурациями dev, stg и prd
Примеры запросов агенту
- Проверь формат этого токена и добавь его в Doppler для проекта
private-config, конфигурацияprd. - Убедись, что
PYPI_TOKENизвлекается из Doppler и передаётся черезdoppler run. - Проверь аутентификацию API с секретом
PYPI_TOKENи адресомhttps://upload.pypi.org/legacy/.
Как установить doppler-secret-validation
1Через Skills CLI (Vercel)
npx skills add terrylica/cc-skills --skill doppler-secret-validation -a claude-code2Вручную: положить файлы
~/.claude/skills/doppler-secret-validation/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/doppler-secret-validation/
1Через Skills CLI (Vercel)
npx skills add terrylica/cc-skills --skill doppler-secret-validation -a codex2Вручную: положить файлы
.agents/skills/doppler-secret-validation/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add terrylica/cc-skills --skill doppler-secret-validation -a cursor2Вручную: положить файлы
.cursor/skills/doppler-secret-validation/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install terrylica/cc-skills plugins/devops-tools/skills/doppler-secret-validation2Вручную: положить файлы
.github/skills/doppler-secret-validation/SKILL.md1Через Skills CLI (Vercel)
npx skills add terrylica/cc-skills --skill doppler-secret-validation -a gemini-cli2Командой платформы
gemini skills install https://github.com/terrylica/cc-skills --path plugins/devops-tools/skills/doppler-secret-validationВручную: положить файлы
.devin/skills/doppler-secret-validation/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Через Skills CLI (Vercel)
npx skills add terrylica/cc-skills --skill doppler-secret-validation -a opencodeClaude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о doppler-secret-validation
Как установить doppler-secret-validation в Claude Code?
Выполните npx skills add terrylica/cc-skills --skill doppler-secret-validation -a claude-code. Файл скилла находится по пути ~/.claude/skills/doppler-secret-validation/SKILL.md.
Что делает doppler-secret-validation?
Скилл помогает сохранить секрет в Doppler, проверить его хранение и извлечение, а также протестировать API-аутентификацию.
Что нужно для проверки секрета?
Нужны Doppler CLI и доступ к проекту и конфигурации, где хранится секрет. Для API-проверки используется scripts/test_api_auth.py, который адаптируют под конкретный API.
Исходный текст
SKILL.md · MIT
---
name: doppler-secret-validation
description: Validate and test Doppler secrets. TRIGGERS - add to Doppler, store secret, validate token, test credentials.
allowed-tools: Read, Bash
---
# Doppler Secret Validation
> **Self-Evolving Skill**: This skill improves through use. If instructions are wrong, parameters drifted, or a workaround was needed — fix this file immediately, don't defer. Only update for real, reproducible issues.
## Overview
Workflow for securely adding, validating, and testing API tokens and credentials in Doppler secrets management.
## When to Use This Skill
Use this skill when:
- User provides API tokens or credentials (PyPI, GitHub, AWS, etc.)
- User mentions "add to Doppler", "store secret", "validate token"
- User wants to test authentication before production use
- User needs to verify secret storage and retrieval
## Workflow
### Step 1: Test Token Format (Before Adding to Doppler)
Before storing in Doppler, validate token format:
```bash
# Check token format, length, prefix
python3 -c "token = 'TOKEN_VALUE'; print(f'Prefix: {token[:20]}...'); print(f'Length: {len(token)}')"
```
**Common token formats**:
- PyPI: `pypi-...` (179 chars)
- GitHub: `ghp_...` (40+ chars)
- AWS: 20-char access key + 40-char secret
### Step 2: Add Secret to Doppler
```bash
doppler secrets set SECRET_NAME="value" --project PROJECT --config CONFIG
```
**Example**:
```bash
doppler secrets set PYPI_TOKEN="pypi-AgEI..." \
--project private-config --config prd
```
**Important**: CLI doesn't support `--note`. Add notes via dashboard:
1. <https://dashboard.doppler.com>
2. Navigate: PROJECT → CONFIG → SECRET_NAME
3. Edit → Add descriptive note
### Step 3: Validate Storage
Use the bundled validation script:
```bash
/usr/bin/env bash << 'VALIDATE_EOF'
ROOT="$(cc-plugin-root devops-tools)"
cd "$ROOT/skills/doppler-secret-validation"
uv run scripts/validate_secret.py \
--project PROJECT \
--config CONFIG \
--secret SECRET_NAME
VALIDATE_EOF
```
This validates:
1. Secret exists in Doppler
2. Secret retrieval works
3. Environment injection works via `doppler run`
**Example**:
```bash
uv run scripts/validate_secret.py \
--project private-config \
--config prd \
--secret PYPI_TOKEN
```
### Step 4: Test API Authentication
Use the bundled auth test script (adapt test_api_authentication() for specific API):
```bash
/usr/bin/env bash << 'CONFIG_EOF'
ROOT="$(cc-plugin-root devops-tools)"
doppler run --project PROJECT --config CONFIG -- \
"$ROOT/skills/doppler-secret-validation/scripts/test_api_auth.py" \
--secret SECRET_NAME \
--api-url API_ENDPOINT
CONFIG_EOF
```
**Example (PyPI)**:
```bash
doppler run --project private-config --config prd -- \
uv run scripts/test_api_auth.py \
--secret PYPI_TOKEN \
--api-url https://upload.pypi.org/legacy/
```
### Step 5: Document Usage
After validation, document the usage pattern for the user:
```bash
/usr/bin/env bash << 'CONFIG_EOF_2'
# Pattern 1: Doppler run (recommended for CI/scripts)
doppler run --project PROJECT --config CONFIG -- COMMAND
# Pattern 2: Manual export (for troubleshooting)
export SECRET_NAME=$(doppler secrets get SECRET_NAME \
--project PROJECT --config CONFIG --plain)
CONFIG_EOF_2
```
### Step 5b: Directory-Scoped Doppler Config (Local Development)
For per-directory credentials, bind the directory to a Doppler project/config once with `doppler setup`; every later `doppler run` in that directory picks it up without `--project`/`--config`:
```bash
cd ~/project && doppler setup --project myproject --config prd --no-interactive
doppler run -- COMMAND
```
**GitHub tokens are the exception**: do not inject `GH_TOKEN`/`GITHUB_TOKEN` from Doppler into a directory (ADR 2026-06-21). GitHub multi-account auth is driven by the repo's `origin` host-alias, and a token resolves fresh per-repo via `~/.claude/tools/bin/gh-token-for-repo`.
## Common Patterns
### Multiple Configs (dev, stg, prd)
Add secret to multiple environments:
```bash
# Production
doppler secrets set TOKEN="prod-value" --project foo --config prd
# Development
doppler secrets set TOKEN="dev-value" --project foo --config dev
```
### Verify Secret Across Configs
```bash
/usr/bin/env bash << 'CONFIG_EOF_3'
for config in dev stg prd; do
echo "=== $config ==="
doppler secrets get TOKEN --project foo --config $config --plain | head -c 20
echo "..."
done
CONFIG_EOF_3
```
## Security Guidelines
1. **Never log full secrets**: Use `${SECRET:0:20}...` masking
2. **Prefer doppler run**: Scopes secrets to single command
3. **Use --plain only for piping**: Human-readable view masks secrets
4. **Separate configs per environment**: dev/stg/prd isolation
## Bundled Resources
- **scripts/validate_secret.py** - Complete validation suite (existence, retrieval, injection)
- **scripts/test_api_auth.py** - Template for API authentication testing
- **references/doppler-patterns.md** - Common CLI patterns and examples
## Reference
- Doppler docs: <https://docs.doppler.com/docs>
- CLI install: `brew install dopplerhq/cli/doppler`
- See [doppler-patterns.md](./references/doppler-patterns.md) for comprehensive patterns
---
## Troubleshooting
| Issue | Cause | Solution |
| --------------------------- | ------------------------------ | ------------------------------------------------------------------------------------------- |
| Secret not found | Wrong project/config specified | Verify with `doppler secrets ls --project X --config` |
| Auth test fails with 401 | Token expired or invalid | Regenerate token, re-add to Doppler |
| doppler run hangs | CLI waiting for input | Add `--no-interactive` flag |
| Token prefix mismatch | Wrong token type used | Check expected format (pypi-, ghp-, AKIA, etc.) |
| Validation script not found | Wrong directory context | Use `cc-plugin-root devops-tools` to find the plugin root, then `cd` to the skill directory |
| Secret retrieval empty | Secret name typo | List secrets: `doppler secrets ls --project X` |
| Multiple configs confusion | Secrets differ across envs | Use explicit --config flag for each command |
## Post-Execution Reflection
After this skill completes, reflect before closing the task:
0. **Locate yourself.** — Find this SKILL.md's canonical path before editing.
1. **What failed?** — Fix the instruction that caused it.
2. **What worked better than expected?** — Promote to recommended practice.
3. **What drifted?** — Fix any script, reference, or dependency that no longer matches reality.
4. **Log it.** — Evolution-log entry with trigger, fix, and evidence.
Do NOT defer. The next invocation inherits whatever you leave behind.
© terrylica · MIT · terrylica/cc-skills