К основному содержанию
скилл CX Codex

steve-surfaces — скилл для Claude Code: поверхности в CAD

Скилл steve-surfaces для Claude Code помогает строить свипы, лофты и поверхности в CAD-модели. Подключается перед созданием или изменением этих объектов и превращением поверхностей в тела.

Apache-2.0 ★ 86 обновлён 2026-11-13

Установить в Claude Code · Через Skills CLI (Vercel) Все способы и платформы ↓
npx skills add stevecad/steve --skill steve-surfaces -a claude-code
Открыть на GitHub

Что делает steve-surfaces

Скилл описывает, как создавать свипы и лофты, замыкать контуры поверхностями и превращать поверхности в твёрдые тела. Для свипа можно задать направляющую кривую или дополнительные сечения; у лофта настраиваются переходы между собственными сечениями и степень сглаживания.

Поверхности без объёма не учитываются при расчёте массы и симуляции, а также не подходят для мехобработки. Свипы и лофты не дают непрерывности G2/Class-A; переход между соседними гранями поверхности ограничен G1. Перед изменением модели скилл предписывает читать документ через cad_read, а результат сборки проверять через cad_inspect.

Какие задачи решает

  • провести профиль по траектории с направляющей кривой
  • построить лофт между эскизами с заданной непрерывностью
  • закрыть контур рёбер заполняющей поверхностью
  • утолщить поверхность или сшить поверхности в тело

Примеры запросов агенту

  • Создай свип профиля по траектории и задай направляющую кривую.
  • Построй лофт между этими эскизами с непрерывностью C1.
  • Закрой контур рёбер поверхностью, затем утолщай её наружу.

Как установить steve-surfaces

1Через Skills CLI (Vercel)

npx skills add stevecad/steve --skill steve-surfaces -a claude-code

2Вручную: положить файлы

~/.claude/skills/steve-surfaces/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/steve-surfaces/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы о steve-surfaces

Как установить steve-surfaces в Claude Code?

Выполни npx skills add stevecad/steve --skill steve-surfaces -a claude-code. Файл скилла находится по пути ~/.claude/skills/steve-surfaces/SKILL.md.

Что делает steve-surfaces?

Скилл помогает создавать свипы, лофты и поверхности в CAD-модели, а также утолщать или сшивать поверхности в твёрдые тела.

Какие ограничения есть у поверхностей и лофтов?

Поверхности без объёма не участвуют в расчёте массы, симуляции и мехобработке. Лофты не обеспечивают G2/Class-A непрерывность с соседними гранями.

Исходный текст

SKILL.md · Apache-2.0
---
name: steve-surfaces
description: >-
  Sweeps, lofts and surfaces in a part: sweep options (frenet, binormal, guide curves, extra sections), loft options
  (ruled, continuity between its own sections, smoothing, degree), surface bodies from boundaries (fill,
  boundary_surface), turning surfaces into solids (thicken, solidify), and the continuity STEVE can and can't give.
  Load before writing or changing a sweep, a loft, a fill or boundary surface, or a thicken or solidify.
---

## Steve execution rules

This skill adapts Steve Studio's CAD guidance for Steve running locally. The modeling
examples below describe the shared CAD runtime. These local execution rules take
precedence over upstream service workflows and tool names in that reference.

- Read the active document with `cad_read`; inspect built geometry with `cad_inspect`.
  Do not guess persistent face names, document shapes, revision IDs or import hashes.
- Apply source changes with `cad_build(document=..., expected_revision=...)`, preserving
  the document schema returned by `cad_read`. Use `cad_set_parameters` for parameter
  changes. Inspect the build result and errors before reporting success.
- `cad_api_reference` provides installed Model, Sketch, Component and Design signatures.
  The installed runtime and available tool schemas are authoritative if reference
  examples describe newer or unavailable capabilities.
- Export built geometry using `cad_export` with the current revision and a supported
  format. Drawing PDF/SVG/DXF workflows are available in the drawing UI; do not claim
  the geometry export tool exports drawings unless its schema supports that.
- Find standard parts or locally imported McMaster parts with `cad_find_parts`, then
  cache a part using `cad_import_catalog_part`. Use the returned import hash with
  `Model.import_step`. Import arbitrary STEP files through the local Import UI.
- `cad_source_package` reads a transferable source package; `cad_import_package`
  imports supplied root and dependency documents locally. These do not publish.
- Upstream `read_part`, `edit_part`, `read_design`, `inspect_model`, upload-ticket,
  workspace/server/document-ID and cloud export instructions are reference context,
  not available local commands. Use the local tools above. Do not sign in to Studio,
  upload, publish, or call a connected Studio MCP merely to perform local CAD.
- SaaS upload quotas are not local limits. Simulation, electronics, CAM, teams and
  cloud jobs are outside this local CAD skill. Do not invent their availability.
  References to unbundled skills do not imply those features are installed.

## Upstream CAD reference



# Sweeps, lofts and surfaces

Look up any call's exact signature with `api_reference("Model.sweep")` (or `Model.loft`, `Model.fill`, …) rather
than guessing.

## Sweep

`model.sweep(id, profile, path, …)` sweeps a closed profile along a path (a sketch or edge refs). How the profile turns
(one of these at most; the default is a corrected Frenet frame):

- `frenet=True`: the plain Frenet frame.
- `binormal=(dx, dy, dz)`: keeps the profile's orientation to that direction, with no twist.
- `guide=<sketch>`: a guide curve steers the sweep and scales it from the profile's outline.
- `sections=[more profiles]` with `positions=[0..1 each]`: more profiles along the path, at those fractions of it.

A sweep isn't G2/Class-A.

## Loft

`model.loft(id, [sketches], …)` lofts through sketches in order. A point id may be the first or last section (a loft to
a point).

- `ruled=True`: straight between sections.
- `continuity="C1"|"C2"`: between the loft's own sections only.
- `smoothing=True`, `max_degree=2..25`.

A loft has no G2/Class-A continuity to other faces.

## Surface bodies

- `model.fill(id, boundary=[curves], continuity="G0"|"G1")`: an N-sided patch closing a loop of edges or sketch
  curves. "G0" (the default) passes through the edges; "G1" is also tangent to the face each edge bounds, per edge as
  `{edge: "G1"}` if needed, and an edge between two faces needs `support=` (the face to be tangent to).
  `constraints=` adds points or curves the patch passes through.
- `model.boundary_surface(id, curves_u, curves_v=None, ruled=False)`: a surface through two or more curve sets in
  order (a loft that stays a surface). With `curves_v` too, the outer curves bound a four-sided patch and the inner
  ones guide it.

Surface bodies have no volume or mass and are never machined: meshes, mass, simulation and machining leave them out,
and the build warns about them. Their continuity to neighbouring faces is G1 at most, never G2/Class-A.

## Solids from surfaces

- `model.thicken(id, source, thickness, side="out"|"in"|"both")`: offsets a surface (or faces) into a solid along
  the faces' normals. Faces `<id>.outer`, `<id>.inner`, `<id>.side`. A face curving tighter than the thickness is
  refused, with its radius.
- `model.solidify(id, [surfaces], tolerance=0.01)`: sews surfaces that close a volume into one solid (gaps up to the
  tolerance). A set that doesn't close is refused, naming each open edge.

© stevecad · Apache-2.0 · stevecad/steve

Похожие скиллы

Все скиллы по теме «Дизайн» →
cad earthtojake Скилл cad для Claude Code создаёт и редактирует параметрические 3D-модели деталей и сборок на Python через build123d. Запускается при проектировании деталей или подготовке чертежей. CX Codex +1 15 600установок dfam-check earthtojake Скилл dfam-check проверяет 3D-сетки на соответствие правилам аддитивного производства перед печатью. Анализирует толщину стенок, свесы и ориентацию деталей для FDM, SLS, SLA, PBF и MJF. CX Codex +1 5 200установок discover-event-surfaces amplitude Скилл discover-event-surfaces анализирует YAML-отчёт diff-intake после правок кода и формирует список событий аналитики перед ревью с продакт-менеджером. CX Codex +1 65 900установок steve-jobs-design-review wondelai Скилл steve-jobs-design-review для Claude Code и Cursor проводит аудит интерфейса или продукта по стандартам Стива Джобса: сокращает лишние функции и оценивает клиентский путь без скидок на компромиссы. CX Codex +1 3 800установок Protogen CAD hartjustin6 MCP-сервер Protogen CAD для Claude Code строит параметрические CAD-модели по спецификации или измерению и отдаёт их в OpenSCAD или STEP. Деталь описывают словами вместо чертежа. CX Codex +1 252установок DezignWorks recursive DezignWorks — MCP-сервер для Claude Code, который отвечает на вопросы о ПО для реверс-инжиниринга CAD-эскизов. Он помогает сравнить тарифы и проверить совместимость оборудования и форматов файлов. CX Codex +1 201установок

Из того же набора9

steve-step-import Скилл steve-step-import для Claude Code помогает импортировать STEP-геометрию и добавлять к ней CAD-функции. Загружается для изменения импортированной детали, сборки из частей или ремонта функций, привязанных к номерам граней. CX Codex +1 ★ 86звёзд репо steve-standard-parts Скилл steve-standard-parts для Claude Code находит готовые детали в каталоге step.parts и добавляет крепежи в CAD-модели. Запускается перед сборкой узлов и заменой временных заглушек. CX Codex +1 ★ 86звёзд репо steve-materials Скилл steve-materials для Claude Code задаёт материалы и внешний вид деталей в CAD-модели. Загружайте его перед назначением материала, расчётом массы или добавлением изображения на поверхность. CX Codex +1 ★ 86звёзд репо steve-sheet-metal Скилл steve-sheet-metal для Claude Code помогает создавать детали из листового металла средствами Steve CAD. Он подключается перед кодом с функциями sheet_*, чтобы задавать правила листа и строить его элементы. CX Codex +1 ★ 86звёзд репо steve-motion Скилл steve-motion для Claude Code задаёт движение деталей в CAD-проекте. Подключается, когда нужно добавить шарниры, передачи, анимацию или вид со взрыв-схемой. CX Codex +1 ★ 86звёзд репо steve-designs Скилл steve-designs для Claude Code описывает проектирование сборок из нескольких компонентов. Он подключается при создании модели типа design, проверке посадки деталей и работе с крупной сборкой. CX Codex +1 ★ 86звёзд репо steve-blender Скилл steve-blender для Claude Code создаёт Blender-сцены на Python через bpy. Он подключается перед работой с Blender-документом: написанием, правками или ревью. CX Codex +1 ★ 86звёзд репо steve-drawings Скилл steve-drawings для Claude Code создаёт инженерные чертежи для изготовления. Подключается к задачам по созданию, правке или разбору чертежа, штампа, таблицы ревизий, спецификации или карты раскроя. CX Codex +1 ★ 86звёзд репо

Спонсоры проекта

Компании, которые помогают держать аналитику открытой