scenario-video-assembly — скилл для Claude Code: монтаж видео
Скилл scenario-video-assembly для сборки финального видео на Scenario через MCP: склейка клипов, наложение логотипа и титров, подложка музыки, субтитры, обрезка и варианты под соцсети.
MIT 919 установок ★ 3 964 обновлён 2026-11-01
npx skills add scenario-labs/skills --skill scenario-video-assembly -a claude-codeЧто делает scenario-video-assembly
Работает через детерминистические модели Scenario: model_scenario-video-concat склеивает от 2 до 50 клипов встык с переходами или жёсткими склейками, model_scenario-compose-video накладывает слои на абсолютный таймлайн — картинки, видео, аудио, каждый со своими startTime, zIndex и fadeIn/fadeOut. Concat сохраняет аудиодорожки каждого клипа, но иногда возвращает ролик с рассинхроном звука и картинки — проверяй properties.duration через asset_get и локальный проб скачанного файла, прежде чем отдавать результат.
Video Studio выстраивает слои по startTime и zIndex, координаты x и y принимают пиксели, проценты или слова ("right", "center"), anchor задаёт точку привязки слоя. Чтобы перекадрировать клип, задай width и height в строках (как "1920"), а fit поставь "cover" для кропа или "contain" для летербокса. Титры и нижние плашки приходят PNG-слоями через scenario-text-overlay.
Какие задачи решает
- Склеить клипы с переходами или жёсткими склейками
- Наложить логотип, титры или нижнюю плашку на таймлайн
- Подложить музыкальную дорожку под нарезку клипов
- Сделать вертикальный и квадратный варианты из горизонтального ролика
- Проверить синхрон звука и картинки после склейки
Примеры запросов агенту
- Склей три клипа с
fadeпереходами по 0.5 секунды между ними - Наложи лого
logo.pngв правый нижний угол с отступом 5% - Подложи
music.mp3под склейку и обрежь по длине видео
Как установить scenario-video-assembly
1Через Skills CLI (Vercel)
npx skills add scenario-labs/skills --skill scenario-video-assembly -a claude-code2Вручную: положить файлы
~/.claude/skills/scenario-video-assembly/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/scenario-video-assembly/
1Через Skills CLI (Vercel)
npx skills add scenario-labs/skills --skill scenario-video-assembly -a codex2Вручную: положить файлы
.agents/skills/scenario-video-assembly/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add scenario-labs/skills --skill scenario-video-assembly -a cursor2Вручную: положить файлы
.cursor/skills/scenario-video-assembly/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install scenario-labs/skills skills/scenario-video-assembly2Вручную: положить файлы
.github/skills/scenario-video-assembly/SKILL.md1Через Skills CLI (Vercel)
npx skills add scenario-labs/skills --skill scenario-video-assembly -a gemini-cli2Командой платформы
gemini skills install https://github.com/scenario-labs/skills --path skills/scenario-video-assemblyВручную: положить файлы
.devin/skills/scenario-video-assembly/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Через Skills CLI (Vercel)
npx skills add scenario-labs/skills --skill scenario-video-assembly -a opencodeClaude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о scenario-video-assembly
Как установить scenario-video-assembly в Claude Code?
Выполни npx skills add scenario-labs/skills --skill scenario-video-assembly -a claude-code, затем открой ~/.claude/skills/scenario-video-assembly/SKILL.md.
Что делает scenario-video-assembly?
Собирает финальное видео из клипов на Scenario: склеивает фрагменты, накладывает слои (логотипы, титры, музыку), обрезает и делает варианты под разные форматы.
Почему после concat звук расходится с картинкой?
Это известный баг: concat с preserveAudio: true иногда возвращает рассинхрон. Проверяй длину через asset_get и локальный проб скачанного файла, для диалогов используй Video Studio вместо concat.
Исходный текст
SKILL.md · MIT
---
name: scenario-video-assembly
description: "Use when generated clips must become a finished video on Scenario via MCP: cutting a shot list together, laying a timeline, concatenating with transitions, overlaying a logo or title card, adding a music bed or voiceover, burning in or exporting captions and subtitles, trimming and splitting, or producing vertical and square variants of one master. Keywords: edit, assemble, stitch, concat, compositor, timeline, layers, overlay, captions, SRT, ad, UGC, social cut."
license: MIT
---
# Scenario Video Assembly
## Overview
Scenario has no editing tools on the MCP surface. Every compositor, concatenator, trimmer and
captioner is a deterministic model run through `model_run`. The compositor, concatenator and trimmer
ids are fixed and named below; Scenario ships two captioners, so that one is discovered with
`recommend`. Connection and the core loop: see the `scenario` skill; the clips themselves: see
`scenario-video`. If a sibling skill named here is missing from your available skills, load it with
`skill_get` (Scenario MCP) or ask the user to install it
(https://github.com/scenario-labs/skills#install); unattended, proceed from tool schemas and flag
the gap.
## Quick reference: pick the backend first
| Need | Model |
| ------------------------------------------ | ------------------------------ |
| Clips end to end, optional transitions | `model_scenario-video-concat` |
| Anything overlapping: overlay, bed, titles | `model_scenario-compose-video` |
| Still layout (thumbnails, sheets, key art) | `model_scenario-compose-image` |
These ids are constants: each is Scenario's single deterministic tool for its operation, so
discovery would only re-derive it.
Concat is sequential: `videos` takes 2 to 50 files (never 1), `preserveAudio` (default true) carries
each clip's own track into the cut, and the optional `transitions` array's "length must be number of
videos - 1". Each entry is an object `{type, duration}`, never a bare string: `type` is one of 18
names read off the schema (`fade`, the default, is the plain crossfade; `dissolve` is a different
effect; `none` a hard cut) and `duration` runs 0.1 to 5 seconds, default 0.5. Omit the array for
hard cuts throughout, the right call whenever the brief does not ask one shot to flow into the next.
`preserveAudio` is not a guarantee of sync: a concatenated cut has come back with its audio drifting
against the picture, with and without transitions (a confirmed defect at authoring time). A concat
of clips carrying dialogue or effects is verified, never trusted: `asset_get` the output and compare
`properties.duration` with the inputs' sum (each transition shortens the cut by up to its
`duration`), then download it and check that the audio and video streams run the same length (a
local probe of the download is inspection, not editing) and that a visible cue (a cut, a mouth
opening, an impact) lands on its sound. When speech must stay locked to the picture, assemble in
Video Studio instead: each clip layer carries its own track at its `startTime`, so a drift
introduced by joining has nowhere to arise, at the price of hard cuts or per-layer fades in place of
the transition set. Concat stays the tool for silent clips and for cuts whose bed is laid
afterwards.
Video Studio is an absolute timeline: `layers` holds 1 to 50 image, video or audio sources placed by
`startTime` and stacked by `zIndex` (higher in front), with per-layer `fadeIn`/`fadeOut` rather than
a between-clip array, so a cross-fade between two clips belongs in concat. At least one layer must
be a video, so a music bed over a still is rejected.
## The Video Studio contract
Per layer, three timing ideas have confusable names:
- `startTime` and `endTime` place the layer on the timeline.
- `trimStart` and `trimEnd` are amounts shaved off the head and tail of the source, not in and out
points: to play the first 20 seconds of a 90-second track, set `trimEnd: 70`.
- `duration` overrides the layer's length. The top-level `duration` is a different field, setting
the whole composition, and applies only when `durationMode` is `"custom"`.
Everything is in seconds at `step: 0.1`, so do not promise frame-accurate cuts. `x` and `y` are
strings taking pixels, percentages or words, and `anchor` says which point of the layer they
address: `top-left`, `top-center`, `top-right`, `center-left`, `center`, `center-right`,
`bottom-left`, `bottom-center`, `bottom-right` (the middle one is bare `center`), defaulting to
`"top-left"`. A bottom-right logo is `x: "right"`, `y: "bottom"`, `anchor: "bottom-right"`, flush to
the edge unless you inset it with a percentage.
`canvasMode` and `durationMode` both default to `"auto"`, computed from the layers: a custom frame
is `canvasMode: "custom"` plus numeric `canvasWidth` and `canvasHeight` (there are no top-level
`width`/`height`, and unlike the layers' string `width`/`height` these are numbers), and a custom
length is `durationMode: "custom"` plus the top-level `duration`. `fit` only acts on a layer that
also sets the layer's own `width` and `height`, strings like `x` and `y`: to reframe a clip, set
both to the canvas size as bare pixel numbers in strings (`width: "1920"`, `height: "1080"`, the
form of the schema's own `"0"` default; a percent string also works) and pass `"cover"` (crops) or
`"contain"` (letterboxes), since the default `"fill"` stretches. Give an overlay layer an explicit
`width` and `height` even at its native size: leaving them empty is documented as preserving the
original but does not reliably, and a 560x80 strip came back at 1792x256 on a 1920x1080 canvas. The
output field is `videoOutputFormat` here, `imageOutputFormat` in Image Studio, and `outputFormat` in
concat and the trim utilities.
A layer's `type` (image, video, audio, or mask) is optional and otherwise inferred from `source`.
There is no text layer, so titles, lower thirds and end cards arrive as rendered PNGs composited as
image layers; `scenario-text-overlay` renders them letter-perfect.
## Worked example: three clips, a music bed, and captions
1. For every source, `asset_get` and read `properties`: the real `duration` (audio carries it too),
`frameRate` on video, and `width`/`height` on video and images alike. A model asked for eight
seconds does not always return exactly eight.
2. Add them up to get each clip's `startTime`, then `model_schema_get` on
`model_scenario-compose-video`.
3. `model_run` it with `layers` holding the three clips at their computed `startTime`s
(`zIndex: 0`), a logo PNG pinned by `x`/`y`/`anchor` at `zIndex: 1`, and the music as an audio
layer trimmed to the clips' total with `trimEnd`, since auto `durationMode` computes from every
layer, the bed included. `volume` (0 to 2) and `mute` are per-layer and apply to video layers
too, so balance the bed from either side. Set `canvasMode: "custom"` with `canvasWidth` and
`canvasHeight`; `fps` defaults to 30 and takes whole numbers from 1 to 120, so set it to the
clips' measured `frameRate` when they agree (rounded), which is what step 1 read it for.
4. `jobs_wait`, then caption the finished cut rather than each clip: `model_scenario-caption-studio`
(an authoring-time pick, since Scenario ships two captioners: re-discover with `recommend`) takes
it as `video` and transcribes whatever audio the master actually carries, so lower the bed's
`volume` rather than muting the dialogue. For Caption Studio, follow `scenario-caption-studio`
for corrected-SRT input and rendered-caption verification rather than inferring an upload route
from a file-typed schema: the exposed `upload_asset` kinds do not include text. It burns captions
in by default, returns a sidecar when `outputSrt` is true, and positions them with `textPosition`
(`top`, `middle` or `bottom`, default `bottom`, so move it off a bottom-edge overlay). Other
captioners use their own live input contracts.
5. `asset_display` to review, then `asset_download` with `format` left unset (it is an image
conversion target) for the file.
For a revision handoff, retain the clean master, source assets, actual submitted layer payload,
measured timings, narration text and voice settings, title PNGs with their editable layout settings,
and any corrected SRT and returned caption theme. Keep output ids linked to the recipe. Revise the
requested layer and recaption from the clean master; do not stack new captions over a burned export.
These records support reconstruction, not a promise of a native editor project or a tested replay in
a new environment.
Trim, split and resize have their own tool models. Note `model_scenario-video-cut`'s
`startTime`/`endTime` are source in and out points, not timeline placement.
## Common mistakes
- Reaching for an MCP tool like `video_compose`, or for local ffmpeg to do the edit itself. The
editing surface is `model_run` on tool models; probing a download is fine.
- Handing concat one clip, or one transition per clip: the minimum is 2 videos, and transitions run
one fewer.
- Trusting `dry_run` here as validation: it returns a cost estimate only, and assembly payloads are
the most structurally complex in the catalog.
- Captioning a concatenated master before checking its sync: the captioner times its lines to the
audio it hears, so drifted audio ships drifted captions on top of it.
© scenario-labs · MIT · scenario-labs/skills