video · remocn — скилл для Claude Code: что делает и как установить
Скилл video для Claude Code создаёт готовые промо-ролики на Remotion по брифу проекта, раскадровке и реестру компонентов remocn. Создаёт ролики для анонсов релизов и демо продуктов.
MIT 482 установок ★ 1 831 обновлён 2026-10-23
npx skills add Remocn/remocn --skill video -a claude-codeЧто делает video
Скилл ведёт процесс создания видеоролика от анализа проекта до финального рендера. Сначала он изучает README и package.json, подбирает подходящий архетип и рассчитывает раскадровку с точным бюджетом кадров. Переходить сразу к коду без подтверждения таблицы раскадровки запрещено.
Для вёрстки сцен скилл настраивает конфигурацию под @remocn через скрипт setup.mjs, загружает нужные блоки командой shadcn add и пишет композицию в файл src/videos/<slug>/index.tsx. Затем агент проверяет готовые кадры через команду remotion still или субагента scene-reviewer, чтобы вовремя заметить смещения и артефакты.
Без базового скилла remocn запуск не сработает: именно в нём хранятся правила вёрстки и рецепты архетипов. Десктопное приложение Remocn Studio не работает на Windows, поэтому на этой системе экспорт доступен только через CLI npx remotion render.
Какие задачи решает
- Собрать продуктовое видео или анонс релиза на Remotion по описанию проекта
- Рассчитать хронометраж и бюджет кадров до написания React-кода
- Подключить анимированные блоки remocn в проект через shadcn
- Проверить статичные кадры анимации на дефекты до финального рендера
Примеры запросов агенту
- Сделай анонсирующее видео для релиза из последнего списка изменений в README
- Собери демо-ролик для терминальной утилиты на 30 секунд по архетипу CLI demo
- Подготовь раскадровку и композицию Remotion для показа отзывов клиентов
Как установить video
1Через Skills CLI (Vercel)
npx skills add Remocn/remocn --skill video -a claude-code2Вручную: положить файлы
~/.claude/skills/video/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/video/
1Через Skills CLI (Vercel)
npx skills add Remocn/remocn --skill video -a codex2Вручную: положить файлы
.agents/skills/video/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add Remocn/remocn --skill video -a cursor2Вручную: положить файлы
.cursor/skills/video/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install Remocn/remocn plugins/remocn/skills/video2Вручную: положить файлы
.github/skills/video/SKILL.md1Через Skills CLI (Vercel)
npx skills add Remocn/remocn --skill video -a gemini-cli2Командой платформы
gemini skills install https://github.com/Remocn/remocn --path plugins/remocn/skills/videoВручную: положить файлы
.devin/skills/video/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Через Skills CLI (Vercel)
npx skills add Remocn/remocn --skill video -a opencodeClaude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о video
Как установить video в Claude Code?
Выполните команду npx skills add Remocn/remocn --skill video -a claude-code. Конфигурация скилла запишется в ~/.claude/skills/video/SKILL.md.
Что делает скилл video?
Он автоматизирует цикл сборки видео на Remotion. Агент планирует тайминг сцен, устанавливает компоненты remocn через shadcn и генерирует готовую композицию.
Что нужно подготовить перед запуском?
Обязательно установите скилл remocn, откуда берутся шаблоны архетипов. Если в проекте ещё нет Remotion, скилл сам создаст чистый каркас через npx create-video@latest.
Исходный текст
SKILL.md · MIT
---
name: video
description: >
Make a complete Remotion video from a short brief with remocn components: pick the archetype, plan
a storyboard with frame budgets, install the components, compose the scenes, check the render and
offer to open the project in Remocn Studio. Use when the user asks for a whole video (product demo,
launch, feature announcement, changelog, OSS showcase, CLI demo, testimonials, year in review,
pricing, logo bumper), not a single component.
---
# Make a video with remocn
The brief: $ARGUMENTS
Load the `remocn` skill before anything else. It carries the conventions this flow relies on (the two
component tiers, Canvas & timing, design defaults) and the recipes in its
`references/archetypes/`. This skill is the order of work; that one is the knowledge.
Work through the steps in order. Don't skip the storyboard confirmation: it is the cheapest point to
change direction.
## 1. Read the brief and the project
- Pull the content from the brief and the repo before asking: `README`, landing copy,
`package.json`, recent releases. Ask only for what is still missing, in one message, and fall back
to honest placeholders rather than blocking.
- Pick the archetype from the `remocn` skill's `references/archetypes/index.md` and read that
recipe. Its content contract tells you what to gather; its duration variants set the target length
when the brief doesn't.
## 2. Plan the storyboard
Plan it in the format of [references/storyboard.md](references/storyboard.md).
- If the `remocn:video-director` agent is available, hand it the brief, the gathered content, the
archetype and the target length, and take its storyboard back.
- Otherwise plan it yourself: shortlist from `https://remocn.dev/llms-components.txt`, read the
`.md` page of every pick, and budget each beat as the format describes.
Show the storyboard to the user **as it is in that format**: the header lines, the table with all its
columns, the install line and the missing-content list. Don't retell it as prose or reshape the
table. A few lines above it on the choices you made are fine. Then **wait for a yes or for
changes**, and apply changes to the table, not straight to code.
## 3. Set up the project
Find out which case you are in:
- **No Remotion project yet** (no `remotion` dependency in `package.json`): create one with
`npx create-video@latest --yes --blank <folder>`, then work inside it. Remotion is a prerequisite
of remocn; this is the only time you create it.
- **An existing Remotion project**: work in it as it is. Don't restructure the user's code.
Then, in both cases:
1. Make `shadcn add` work in the project:
```bash
node "${CLAUDE_SKILL_DIR}/scripts/setup.mjs" <project-root>
```
(Outside Claude Code: `scripts/setup.mjs` next to this file.) `shadcn init` refuses Remotion
projects, and Remotion's bundler ignores tsconfig paths, so the script writes `components.json`
with the `@remocn` registry, adds the `@/*` path to `tsconfig.json`, and resolves the same alias
in `remotion.config.ts`. Each step is skipped when the project already has it; relay any
`warning` in the result.
2. Make the project open in Remocn Studio as-is by following the `studio` skill's **Prepare** step.
For an existing project, say which files these two steps will touch and ask before running them.
## 4. Install and compose
1. Run the storyboard's install line: `npx shadcn add @remocn/<a> @remocn/<b> ...`. Dependencies
install transitively.
2. Write the video as **`src/videos/<slug>/index.tsx`**. This layout is what Remocn Studio scans,
and the scan registers it as a Remotion composition with id `<slug>`:
```tsx
export const meta = {
durationInFrames: 1356, // Planned total from the storyboard
fps: 30,
height: 720,
width: 1280,
};
export default function LaunchVideo() {
return (/* the <TransitionSeries> from the storyboard */);
}
```
Scenes that grow past a screen of code go next to it in the same folder
(`src/videos/<slug>/scenes/hook.tsx`), never beside the video folder. Optional extra exports:
`defaultProps` and a zod `schema`, both forwarded to the composition.
3. Use the exact props from each component's docs page. Sequence lengths come from the storyboard,
not from guesses.
4. Typecheck (`npx tsc --noEmit`) and list compositions (`npx remotion compositions`). The slug
must be in the list. Fix every error before moving on. A missing declaration file for a
component's dependency is fixed with `npm i -D @types/<package>`, not with `any`.
## 5. Check the render
The agent that writes the code never sees the frames, so look at them.
- If the `remocn:scene-reviewer` agent is available, hand it the composition id, the storyboard and
the project path. Apply the fixes it returns, then ask it to check again. Stop after **two** review
rounds and tell the user what is still open, if anything.
- Otherwise render stills yourself at the start, the middle of the motion and the end of the hold of
each beat (`npx remotion still <slug> out/review/<beat>-<frame>.png --frame=<n>`), open the images,
and check them against the `remocn` skill's quality bar (`references/anatomy.md` §3).
## 6. Hand off
1. Tell the user how to preview (`npx remotion studio`) and render
(`npx remotion render <slug> out/<slug>.mp4`).
2. Offer **"Open in Remocn Studio to tweak and export?"** and, on a yes, follow the `studio` skill's
**Open** step. Remocn Studio is a desktop app for tuning elements visually and exporting mp4;
skip the offer on Windows, where it isn't available.
© Remocn · MIT · Remocn/remocn
Похожие скиллы
Все скиллы по теме «Фронтенд и UI» →Сначала — video от других авторов.