nemo-relay-plugin-adaptive-tuning — скилл для Claude Code
Скилл nemo-relay-plugin-adaptive-tuning для Claude Code настраивает и проверяет адаптивное поведение NeMo Relay по телеметрии. Поэтапно настраивает параллелизм, подсказки и prompt-cache.
Apache-2.0 178 установок ★ 4 106 обновлён 2026-10-23
npx skills add NVIDIA/skills --skill nemo-relay-plugin-adaptive-tuning -a claude-codeЧто делает nemo-relay-plugin-adaptive-tuning
Скилл помогает оценить адаптивные плагины NeMo Relay по сигналам выполнения. Он ведёт через сбор базовой линии, включение телеметрии с состоянием в памяти, проверку событий и сравнение результата с исходными показателями. Конфигурация охватывает state, telemetry, adaptive hints, tool parallelism, ACG и rollout policy.
Внутри описан first-party компонент с kind adaptive, режимы параллелизма observe_only, inject_hints и schedule, а также хранилища in_memory и redis. Для ACG доступны провайдеры passthrough, anthropic и openai; точные поля конфигурации находятся в references/config.md, работа с подсказками — в references/hints.md.
Без базовой инструментализации NeMo Relay скилл не применим: сначала нужны scope events и подходящие события managed tool или LLM. Перед schedule нужно проверить идемпотентность инструментов и гонки, а перед ACG — стабильность payload провайдера.
Какие задачи решает
- собрать базовую линию для рабочего процесса
- включить телеметрию адаптивного плагина
- проверить подсказки и параллелизм инструментов
- сравнить rollout с исходными показателями
Примеры запросов агенту
- Проверь базовую линию NeMo Relay и подготовь поэтапный rollout adaptive-плагина.
- Настрой telemetry с состоянием
in_memory, затем сравни результаты с baseline. - Проверь, можно ли включить
scheduleи ACG для текущих событий инструментов и LLM.
Как установить nemo-relay-plugin-adaptive-tuning
1Через Skills CLI (Vercel)
npx skills add NVIDIA/skills --skill nemo-relay-plugin-adaptive-tuning -a claude-code2Вручную: положить файлы
~/.claude/skills/nemo-relay-plugin-adaptive-tuning/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/nemo-relay-plugin-adaptive-tuning/
1Через Skills CLI (Vercel)
npx skills add NVIDIA/skills --skill nemo-relay-plugin-adaptive-tuning -a codex2Вручную: положить файлы
.agents/skills/nemo-relay-plugin-adaptive-tuning/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add NVIDIA/skills --skill nemo-relay-plugin-adaptive-tuning -a cursor2Вручную: положить файлы
.cursor/skills/nemo-relay-plugin-adaptive-tuning/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install NVIDIA/skills skills/nemo-relay-plugin-adaptive-tuning2Вручную: положить файлы
.github/skills/nemo-relay-plugin-adaptive-tuning/SKILL.md1Через Skills CLI (Vercel)
npx skills add NVIDIA/skills --skill nemo-relay-plugin-adaptive-tuning -a gemini-cli2Командой платформы
gemini skills install https://github.com/NVIDIA/skills --path skills/nemo-relay-plugin-adaptive-tuningВручную: положить файлы
.devin/skills/nemo-relay-plugin-adaptive-tuning/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Через Skills CLI (Vercel)
npx skills add NVIDIA/skills --skill nemo-relay-plugin-adaptive-tuning -a opencodeClaude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о nemo-relay-plugin-adaptive-tuning
Как установить nemo-relay-plugin-adaptive-tuning в Claude Code?
Выполните npx skills add NVIDIA/skills --skill nemo-relay-plugin-adaptive-tuning -a claude-code, затем откройте файл ~/.claude/skills/nemo-relay-plugin-adaptive-tuning/SKILL.md.
Что делает nemo-relay-plugin-adaptive-tuning?
Скилл ведёт настройку адаптивного компонента NeMo Relay: от baseline и телеметрии до проверки подсказок, параллелизма, ACG и измеренного rollout.
Что нужно проверить перед включением schedule?
Нужно проверить идемпотентность инструментов и поведение при гонках. При регрессии по задержке, корректности или ошибкам следует вернуть последнюю рабочую конфигурацию.
Исходный текст
SKILL.md · Apache-2.0
---
name: nemo-relay-plugin-adaptive-tuning
description: Use this skill when baseline NeMo Relay instrumentation exists and the user wants to configure or evaluate adaptive plugin behavior, including telemetry, state, adaptive_hints, tool_parallelism, ACG, hint consumption, or measured rollout.
license: Apache-2.0
metadata:
author: NVIDIA Corporation and Affiliates
---
# Tune Adaptive Plugin Behavior
## Use This When
Use this skill when a user has baseline NeMo Relay instrumentation and wants to
improve latency, parallelism, prompt-cache behavior, or model-request behavior
from runtime signals.
Keep adaptive behavior measured against a known baseline.
## Do Not Use This When
Do not use this skill when the application is not instrumented yet. Start with
`nemo-relay-instrument-calls` or `nemo-relay-get-started` first.
## Default Guidance
- Observe first, compare against a baseline, then enable one behavior change at
a time.
- Use the adaptive plugin component rather than inventing separate tuning logic
or hand-registering adaptive behavior at every call site.
- Start with in-memory state and telemetry-only behavior for local development.
- Move to persistent state only when learned signals must survive restarts or be
shared across workers.
- Add active behavior only after representative runtime events show what should
change.
## Embedded Adaptive Model
- Adaptive behavior is configured through the first-party plugin component with
kind `adaptive`.
- Adaptive requires existing NeMo Relay scopes and at least one relevant
managed tool or LLM lifecycle event stream because it learns from runtime
signals.
- Main configuration areas are state, telemetry, adaptive hints, tool
parallelism, Adaptive Cache Governor (ACG), and rollout policy.
- State backends are `in_memory` and `redis`.
- Tool-parallelism modes are `observe_only`, `inject_hints`, and `schedule`.
- Adaptive Cache Governor providers are `passthrough`, `anthropic`, and
`openai`; omit ACG until prompt-cache planning is needed.
- Helper APIs exist in Rust `nemo_relay_adaptive`, Python `nemo_relay.adaptive`,
and Node.js `nemo-relay-node/adaptive`. Go and raw FFI are
source-first or advanced surfaces.
## Default Path
Use this rollout sequence:
1. Confirm the app emits scope events and the managed tool or LLM events needed
for the behavior being evaluated. Do not require both call types when the
workflow uses only one.
2. Capture a baseline for the workflow you want to improve.
3. Enable adaptive telemetry with in-memory state.
4. Read `references/config.md` when exact plugin configuration fields are needed.
5. Run representative traffic and inspect reports or runtime events.
6. If configuration validation fails or expected events are absent, return the
diagnostics and stop. Keep the last known working configuration active.
7. Before enabling scheduling, verify tool idempotency and race behavior. Before
enabling ACG, verify that provider request payloads are stable.
8. Enable the smallest behavior change in config.
9. Read `references/hints.md` when application logic consumes adaptive hints,
tool-parallelism guidance, or ACG diagnostics.
10. Compare results against the baseline. If latency, correctness, or failure
rate regresses, restore the last known working configuration and retain the
sanitized diagnostics for review.
## Failure Modes To Avoid
- Do not enable scheduling before tool idempotency and race behavior are known.
- Do not enable prompt-cache planning before provider payloads are stable.
- Do not treat adaptive hints as mandatory instructions unless the consuming
path explicitly defines that contract.
- Do not use environment variables as the primary adaptive configuration model.
- Do not tune from a single run or unrepresentative traffic.
- Do not suppress or replace original tool and model errors.
- Do not add retries until the call owner defines their safety.
- Revert adaptive behavior when it increases the failure rate.
## Load A Reference When
- You need the exact adaptive config shape -> `references/config.md`
- You need to consume adaptive hints or scheduling guidance in app logic ->
`references/hints.md`
## Use Another Skill When
- You need to build reusable plugin behavior instead of configuring the built-in
adaptive component -> `nemo-relay-plugin-build`
## Related Skills
- `nemo-relay-get-started`
- `nemo-relay-instrument-calls`
- `nemo-relay-plugin-observability`
- `nemo-relay-plugin-build`
© NVIDIA Corporation and Affiliates · Apache-2.0 · NVIDIA/skills