myoffice — скилл для Claude Code: что делает и как установить
Скилл myoffice для Claude Code разворачивает локальный визуальный офис и показывает в реальном времени статус всех запущенных на машине ИИ-агентов.
MIT ★ 408 обновлён 2026-11-17
npx skills add Charonyuu/whatsmyagentdoing --skill myoffice -a claude-codeЧто делает myoffice
Скилл myoffice запускает локальный веб-дашборд и открывает его в браузере по адресу 127.0.0.1:4545. Интерфейс отображает активность сессий Claude Code, Codex, Gemini CLI, Copilot CLI, Kimi Code и других инструментов: думает ли агент, выполняет команду или ожидает ответ пользователя.
Данные считываются напрямую из локальных файлов сессий (~/.claude/projects, ~/.codex/sessions) и локальных баз SQLite, ничего не отправляя во внешнюю сеть. Для отображения разрешений Claude Code предусмотрена установка хука уведомлений командой node <base directory>/bin/cli.js --install-hook.
Для работы требуется Node.js версии 18 или выше. Флаг --private скрывает тексты промптов при демонстрации экрана, а ключ --json отдаёт моментальный снимок статусов прямо в чат без открытия веб-страницы.
Какие задачи решает
- отследить зависшие или ожидающие ответа сессии ИИ-агентов
- посмотреть статусы всех локальных кодинг-агентов на одном экране
- скрыть промпты и ответы агентов при трансляции экрана через флаг
--private - вывести моментальную сводку активных сессий в чат в формате JSON
Примеры запросов агенту
- /myoffice
- Покажи статус всех моих запущенных агентов через myoffice
node <base directory>/bin/cli.js --json --hours 2
Как установить myoffice
1Через Skills CLI (Vercel)
npx skills add Charonyuu/whatsmyagentdoing --skill myoffice -a claude-code2Вручную: положить файлы
~/.claude/skills/myoffice/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/myoffice/
1Через Skills CLI (Vercel)
npx skills add Charonyuu/whatsmyagentdoing --skill myoffice -a codex2Вручную: положить файлы
.agents/skills/myoffice/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add Charonyuu/whatsmyagentdoing --skill myoffice -a cursor2Вручную: положить файлы
.cursor/skills/myoffice/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install Charonyuu/whatsmyagentdoing myoffice2Вручную: положить файлы
.github/skills/myoffice/SKILL.md1Через Skills CLI (Vercel)
npx skills add Charonyuu/whatsmyagentdoing --skill myoffice -a gemini-cli2Командой платформы
gemini skills install https://github.com/Charonyuu/whatsmyagentdoingВручную: положить файлы
.devin/skills/myoffice/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Claude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы о myoffice
Как установить myoffice в Claude Code?
Выполните команду npx skills add Charonyuu/whatsmyagentdoing --skill myoffice -a claude-code в терминале.
Что делает myoffice?
Запускает локальный веб-сервер и открывает интерактивный дашборд со всеми агентами на компьютере, показывая их текущие статусы: выполнение инструментов, ожидание ввода или завершение задачи.
Что нужно для работы myoffice?
Понадобится установленный Node.js версии 18+. Сервер слушает только интерфейс 127.0.0.1 и читает данные из стандартных каталогов сессий на диске.
Исходный текст
SKILL.md · MIT
---
name: myoffice
description: Open a live office view of every Claude Code, Codex, Gemini CLI, Antigravity CLI, Copilot CLI, OMP, Pi, Kimi Code, DeepSeek Harness, Grok Build, OpenCode and Hermes agent on this machine — who is thinking, running a tool, writing a reply, waiting for the user, or done. Use when the user types /myoffice, asks what their agents are doing, wants to see all running sessions, or which agent is stuck or finished ("我的 agent 在幹嘛", "show my agents").
---
# myoffice
Start the dashboard. It serves a local page and opens it in the browser.
Run it **in the background** so it keeps running and doesn't block the chat
(this skill's base directory is shown above as "Base directory for this skill"):
```bash
node "<base directory>/bin/cli.js"
```
If it is already running, the same command just reopens the browser tab.
To **update** it — `/myoffice update`, or the user asks to update / upgrade —
run `node "<base directory>/bin/cli.js" --update` (not in the background),
report the version it printed, then start it again as above. The page also
updates itself when a new version is out, and shows an "Update" button if that fails.
To **close** it — `/myoffice stop`, or the user asks to stop / close / shut the
office down — run (not in the background):
```bash
node "<base directory>/bin/cli.js" --stop
```
and say it's stopped.
Then tell the user, in one line, that the office is open at the printed URL.
If the output also says **"Update available: vA → vB"**, tell the user a new
version is out; the page installs it on its own once it opens (or run
`/myoffice update`, below).
Requires Node.js 18+; if `node` is missing, say so and stop.
## Scenes (3D)
Besides the built-in office there are downloadable 3D scenes (e.g. a pirate
cove). When the user asks for another scene, a different look, "DLC", or names
one ("海盜船", "pirate"):
1. `node "<base directory>/bin/cli.js" --scenes` — lists every scene, whether
it's installed, and its download size. Use the ids it prints; don't guess.
2. `node "<base directory>/bin/cli.js" --scene <id>` (in the background) —
downloads it if needed (checksum-verified, data only) and opens the office
in that scene. `--scene office` goes back to the office.
Scenes are only downloaded when asked for. `--remove-scene <id>` deletes one.
Options the user may ask for:
- `--private` — hide prompts/replies, show status only (for screen sharing)
- `--hours 4` — only sessions active in the last 4 hours (default 24)
- `--port 5000` — different port (default 4545)
- `--stop` — stop the running dashboard
- `--json` — print a one-off snapshot instead of opening a page. Use this when
the user asks in chat what their other agents are doing: run
`node "<base directory>/bin/cli.js" --json --hours 2` and summarize by status.
If the user wants Claude Code permission prompts to show as "Waiting for you"
(Claude Code doesn't log them), offer `node "<base directory>/bin/cli.js" --install-hook`.
It adds one Notification hook to their Claude Code settings; `--uninstall-hook` removes it.
Ask before running it, since it changes their settings.
Everything is read locally from the agents' own session folders (`~/.claude/projects`,
`~/.codex/sessions`, `~/.gemini/tmp`, `~/.gemini/antigravity-cli`, `~/.copilot/session-state`, `~/.omp`, `~/.pi`, `~/.kimi-code`,
`~/.dsh`, `~/.grok`) and databases (`~/.local/share/opencode/opencode.db`, `%LOCALAPPDATA%\hermes\state.db`);
the server listens on 127.0.0.1 only and sends nothing anywhere.
© Charonyuu · MIT · Charonyuu/whatsmyagentdoing