К основному содержанию
скилл CX Codex

manage-flows — скилл для Claude Code: что делает и как установить

Скилл manage-flows управляет жизненным циклом потоков Power Automate в Claude Code: публикует, тестирует, собирает инвентаризацию и гасит зависшие запуски.

MIT ★ 1 167 обновлён 2026-10-29

Установить в Claude Code · Через маркетплейс плагинов Все способы и платформы ↓
/plugin marketplace add microsoft/power-platform-skills
/plugin install power-automate@power-platform-skills
Открыть на GitHub

Что делает manage-flows

Скилл подключается к окружениям Power Automate через набор MCP-инструментов FlowAgent. Он умеет запускать цикл проверки: включает поток через publish_flow, выполняет тестовый прогон с таймаутом 30 секунд и выводит отчёт со статусами действий. Для массовых правок предусмотрено пакетное включение, выключение и удаление. Защита от случайной потери данных встроена: после 3 удалений за 10 минут сервер требует флаг confirmBulk, а удалённые потоки можно поднять из бэкапа через restore_backup.

При аудите тенанта агент перебирает окружения постранично, кэшируя метаданные на 60 секунд. Скилл обходит минимум 10 окружений перед первой сводкой и не считает список полным, пока не вычитает все курсоры в list_flows. Для аварийных ситуаций есть вызов cancel_all_runs с параметром turnOff: true, который сразу останавливает пачку зависших задач и отключает сбоящий сценарий.

Для работы скилла в сессии Claude Code должны быть доступны инструменты mcp__flowagent__* либо локальная сборка движка Power Automate.

Какие задачи решает

  • Провести тестовый запуск сценария Power Automate сразу после публикации
  • Собрать полную инвентаризацию потоков по нескольким окружениям тенанта
  • Найти потоки с долей сбоев более 50% по последним 5 запускам
  • Остановить лавину зависших запусков и отключить проблемный поток

Примеры запросов агенту

  • Проверь статус потоков в окружении и составь отчёт об инвентаризации
  • Опубликуй поток flow-123, запусти тест и покажи длительность шагов
  • Отмени все активные запуски для сбоящего потока flow-999 и выключи его

Как установить manage-flows

1Через маркетплейс плагинов

/plugin marketplace add microsoft/power-platform-skills
/plugin install power-automate@power-platform-skills

Команда ставит плагин power-automate целиком, со всеми его скиллами

2Через Skills CLI (Vercel)

npx skills add microsoft/power-platform-skills --skill manage-flows -a claude-code

3Вручную: положить файлы

~/.claude/skills/manage-flows/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/manage-flows/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы о manage-flows

Как установить manage-flows в Claude Code?

Добавьте каталог плагинов командой /plugin marketplace add microsoft/power-platform-skills, затем выполните /plugin install power-automate@power-platform-skills.

Что делает скилл manage-flows?

Автоматизирует обслуживание потоков Power Automate: выполняет проверку работоспособности, пакетные операции, аварийную отмену очереди запусков и формирует отчёты по окружениям.

Как работает защита от случайного удаления потоков?

Скилл сначала запрашивает подтверждение списка с именами и идентификаторами. Если за 10 минут удалено более 3 потоков, сервер потребует подтверждение через confirmBulk.

Исходный текст

SKILL.md · MIT
---
name: manage-flows
description: Manage flow lifecycle - publish, test, batch operations, inventory reports. Use when the user asks to publish, test, batch manage, or get an inventory of flows. Inventories page large environment lists and state which environments were covered.
user-invocable: true
argument-hint: "<operation> [flow-ids...]"
context: fork
allowed-tools: Bash, Read, Write, Glob, Grep, mcp__flowagent__list_environments, mcp__flowagent__set_current_env, mcp__flowagent__get_current_env, mcp__flowagent__resolve_environment, mcp__flowagent__list_flows, mcp__flowagent__get_flow, mcp__flowagent__create_flow, mcp__flowagent__update_flow, mcp__flowagent__edit_flow, mcp__flowagent__copy_flow, mcp__flowagent__publish_flow, mcp__flowagent__disable_flow, mcp__flowagent__delete_flow, mcp__flowagent__run_flow, mcp__flowagent__get_run_history, mcp__flowagent__get_run_details, mcp__flowagent__get_run_actions, mcp__flowagent__get_run_action_repetitions, mcp__flowagent__cancel_run, mcp__flowagent__cancel_all_runs, mcp__flowagent__resubmit_run, mcp__flowagent__diagnose_run, mcp__flowagent__list_connections, mcp__flowagent__list_connectors, mcp__flowagent__get_connector, mcp__flowagent__search_operations, mcp__flowagent__get_operation_details, mcp__flowagent__pick_or_create_connection, mcp__flowagent__resolve_refs, mcp__flowagent__resolve_params, mcp__flowagent__scaffold_flow, mcp__flowagent__list_templates, mcp__flowagent__validate_flow, mcp__flowagent__preflight_flow, mcp__flowagent__smoke_test, mcp__flowagent__get_expression_help, mcp__flowagent__list_desktop_flows, mcp__flowagent__list_machine_groups, mcp__flowagent__run_desktop_flow, mcp__flowagent__get_flow_context, mcp__flowagent__set_current_flow, mcp__flowagent__clear_current_flow, mcp__flowagent__invoke_operation, mcp__flowagent__get_past_trigger_inputs, mcp__flowagent__test_connection, mcp__flowagent__fix_connection, mcp__flowagent__delete_connection, mcp__flowagent__preview_update, mcp__flowagent__get_backup, mcp__flowagent__list_backups, mcp__flowagent__restore_backup, mcp__flowagent__list_trigger_emulators, mcp__flowagent__resolve_entity, mcp__flowagent__list_datasets, mcp__flowagent__list_tables, mcp__flowagent__whoami, mcp__flowagent__doctor, mcp__flowagent__reconnect, mcp__flowagent__list_accounts, mcp__flowagent__switch_account
model: opus
---

# Flow Lifecycle Manager

Autonomous agent for flow lifecycle operations: publish-and-test, batch operations, inventory reports.

## Tools

This skill uses the **FlowAgent MCP tools**, referred to by bare name (clients
surface them as `mcp__flowagent__<tool>` in Claude Code or `flowagent-<tool>` in
Copilot CLI). Use CLI shell commands (local engine build only) for CLI-only
operations (connection lifecycle, sharing, solutions/admin) or when no MCP tools
are present.

## Capabilities

### 1. Publish-and-Test Cycle
1. Call `publish_flow` to enable
2. Call `run_flow` with `wait: true` and `timeout: 30` to trigger and wait for completion
3. Report: pass/fail, duration, action statuses

### 2. Batch Operations
For multiple flows (IDs from `$ARGUMENTS` or from `list_flows`):
- **Batch disable**: Call `disable_flow` per flow
- **Batch delete**: First list the exact flows (name + ID) to the user and get explicit confirmation. Never delete "all flows" in an environment from a single instruction. Then call `delete_flow` per flow. After 3 deletes in 10 minutes the server returns `BulkDeleteConfirmRequired`; pass `confirmBulk: true` only for flows the user has confirmed. Deleted flows can be recovered with `list_backups` / `restore_backup`.
- **Batch publish**: Call `publish_flow` per flow
Report per-item success/failure.

### 3. Inventory Report
1. Call `list_environments` to get environments. Large tenants return a partial page (`total`, `nextSkip`, `note`) - page with `skip` or filter with `query`; never treat a partial page as the full list. Reuse this discovery across the per-environment loop rather than listing environments again for every flow lookup. Metadata is cached in memory for up to 60 seconds; use `fresh: true` for explicitly requested current discovery, then page without repeating the fresh bypass
2. Call `list_flows` on **each** environment (or only the ones the user specified) - do not stop at the current one. A partial response contains `flows`, `complete: false` and `nextCursor`: continue with `cursor: nextCursor` and unchanged `env`, `top`, `name` and `filter`. Follow all cursors before treating an environment's count as complete. Continuations may reuse one metadata page for up to 60 seconds; start without a cursor for fresh data. If a changed page requires restarting, discard earlier partial counts for that environment. For many environments, cap the loop (e.g. the first 10-20, or those the user names), and keep going past individual failures. A large tenant is a reason to cap, never a reason to inventory only one: unless the user scoped it, cover at least the first 10 environments before reporting, then offer to continue
3. Produce summary: flow counts by state, trigger types, recent modifications
4. State coverage explicitly: "N of M environments inventoried" and list any skipped, failed or still-partial environments. Count an environment as fully inventoried only when its flow cursors are exhausted. If only one was inventoried (user scoped it, or others failed), say so rather than presenting it as the full tenant

### 4. Health Check
For each flow in an environment:
1. Call `get_run_history` with `top: 5`
2. Count Succeeded vs Failed runs
3. Flag flows with >50% failure rate
Report: flow name, success rate, last run status, last failure error.

### 5. Incident Response (runaway runs)
When a flow is misfiring with many queued runs:
1. Call `cancel_all_runs` to bulk-cancel every Running/Waiting run (uses the
   Dataverse bulk action for solution & modern non-solution flows, per-run
   fallback otherwise). Pass `turnOff: true` to also disable the flow while the
   root cause is fixed.
2. After fixing, `resubmit_run` the affected runs (note: only self-invoked runs
   are resubmittable per PA policy).

© Microsoft · MIT · microsoft/power-platform-skills

Похожие скиллы

Все скиллы по теме «Автоматизация и no-code: n8n, Zapier, Make» →
Power Automate MCP Server by Flow Studio ninihen1 Power Automate MCP Server by Flow Studio — MCP-сервер для Claude Code и Codex, показывающий входы и выходы действий и итерации циклов для диагностики падений потоков. CX Codex +1 ★ 34звёзд репо azure-logic-apps-power-automate официальный github Правило azure-logic-apps-power-automate для GitHub Copilot, которое подсказывает, как писать JSON-определения Azure Logic Apps и Power Automate: триггеры, действия, обработка ошибок. CX Codex +1 ★ 41 430звёзд репо building-flows celigo Скилл building-flows для проектирования и сборки потоков Celigo — конвейеров, которые переносят данные между системами по расписанию или по событиям. Включает управление расписанием, цепочками потоков, обработкой ошибок и шаблонизацией. CX Codex +1 4 000установок windsurf-flows-automation Jeremy Longshore Скилл windsurf-flows-automation для Claude Code создаёт и сопровождает Windsurf Flows — автоматизированные сценарии повторяющихся задач разработки. Превращает рутину в команды. CX Codex +1 1установок alibabacloud-oss-manage-cron-upload aliyun Скилл alibabacloud-oss-manage-cron-upload для Claude Code планирует регулярную загрузку локальной папки в Alibaba Cloud OSS через aliyun CLI. Запуск по расписанию выполняет cron или Windows Task Scheduler. CX Codex +1 262установок dt-obs-network-flows Dynatrace Скилл dt-obs-network-flows для Dynatrace: разбирает сетевые потоки из трёх источников и отвечает, кто с кем говорит и где рвутся соединения. CX Codex +1 1 200установок

Из того же набора157

Весь набор →
diagnose-flow Скилл diagnose-flow для Claude Code анализирует упавший запуск Power Automate: строит граф выполнения, находит причину сбоя и предлагает исправление определения. CX Codex +1 ★ 1 167звёзд репо add-connector Скилл add-connector подключает любые коннекторы Power Platform к кодовым приложениям Power Apps, если для них нет отдельного специализированного скилла. CX Codex +1 ★ 1 167звёзд репо add-dataverse Скилл add-dataverse подключает таблицы Dataverse к приложению Power Apps и создаёт TypeScript-модели и сервисы. Он также помогает спроектировать и создать новые таблицы. CX Codex +1 ★ 1 167звёзд репо add-office365 Скилл add-office365 подключает Office 365 Outlook к Power Apps code app. Даёт доступ к календарю, отправке писем, чтению inbox и управлению событиями. CX Codex +1 ★ 1 167звёзд репо add-datasource Скилл add-datasource выясняет, какие данные нужны мобильному приложению на Expo/React Native, и направляет запрос к подходящему скиллу Power Platform. CX Codex +1 ★ 1 167звёзд репо canvas-create-discovery Субагент canvas-create-discovery для Claude Code проверяет доступные в Power Apps элементы управления, источники данных и API, фиксируя решения и ограничения. Оценивает осуществимость замысла холст-приложения. CX Codex ★ 1 167звёзд репо check-updates Скилл check-updates для Claude Code пошагово проверяет и обновляет прямые зависимости мобильных проектов Power Apps, проверяя сборки и автоматически откатывая изменения при ошибках. CX Codex +1 ★ 1 167звёзд репо report-issue Скилл report-issue для Claude Code собирает контекст проекта и диагностику, чтобы подготовить текст GitHub issue для плагина mobile-app при сбое или запросе к документации. CX Codex +1 ★ 1 167звёзд репо

Спонсоры проекта

Компании, которые помогают держать аналитику открытой