К основному содержанию
скилл CX Codex

layer-video-looks — скилл для Claude Code: что делает и как установить

Скилл layer-video-looks для Claude Code настраивает единую стилизацию, фильтры и хромакей на таймлайне Layer. Включается при сборке видео, когда нужно подогнать шоты по цвету или наложить ретро-эффект.

MIT 1 100 установок ★ 10 обновлён 2026-09-30

Установить в Claude Code · Через Skills CLI (Vercel) Все способы и платформы ↓
npx skills add layerai/skills --skill layer-video-looks -a claude-code
Открыть на GitHub

Что делает layer-video-looks

Скилл настраивает пост-обработку клипов в вызове render_video_timeline. Он добавляет в элементы таймлайна список effects и базовые параметры: blur, brightness, saturation, hue и opacity. Нейросети для наложения этих фильтров не запускаются, поэтому результат повторяется в точности, а стоимость рендера рассчитывает estimate_video_timeline_price.

Фильтры накладываются строго по порядку в массиве: сначала вырезается фон через colorKey, затем идут цветокоррекция (tint, duotone, contrast), текстуры (noise, scanlines) и искажения (wave, fisheye). На таймлайне нет ключевых кадров, поэтому параметры эффекта зафиксированы на всю длину элемента. Движение собирают нарезкой файла на короткие куски с разным progress либо создают отдельной генерацией.

Какие задачи решает

  • вырезать зелёный или синий экран фильтром colorKey
  • стилизовать видео под плёнку, винтажный CRT-монитор или глитч
  • выровнять разницу в экспозиции и цвете между разными шотами
  • заполнить чёрные полосы по краям размытой копией ролика

Примеры запросов агенту

  • Собери ретро-стиль для этих шотов: добавь сканлайны, шум и небольшую хроматическую аберрацию
  • Вырежи зелёный фон у спикера и положи его поверх фона на таймлайне
  • Заполни боковые полосы у вертикального видео размытой подложкой того же клипа

Как установить layer-video-looks

1Через Skills CLI (Vercel)

npx skills add layerai/skills --skill layer-video-looks -a claude-code

2Вручную: положить файлы

~/.claude/skills/layer-video-looks/SKILL.md

Папка скилла целиком; для одного проекта — .claude/skills/layer-video-looks/

По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов

Вопросы о layer-video-looks

Как установить layer-video-looks в Claude Code?

Установите скилл командой: npx skills add layerai/skills --skill layer-video-looks -a claude-code. Также можно положить файл по пути ~/.claude/skills/layer-video-looks/SKILL.md.

Что делает layer-video-looks?

Скилл формирует параметры цветокоррекции, наложения фильтров, хромакея и шума для элементов таймлайна в API Layer.

Поддерживает ли таймлайн анимацию эффектов ключевыми кадрами?

Ключевых кадров в таймлайне нет, параметры фиксируются на всю длительность клипа. Плавное движение создают нарезкой ролика на короткие отрезки с меняющимся шагом progress или генерируют отдельным промптом.

Исходный текст

SKILL.md · MIT
---
name: layer-video-looks
description: "Use when giving a Layer video cut one consistent finish: a colour wash in brand colours, a retro CRT or VHS look, film grain and light leaks, a glitch hit on a cut, keying out a green or blue screen, lifting a cut-out logo off the frame, or filling the bars behind a clip. Also when shots in one edit do not match. Keywords: look, grade, filter, tint, duotone, film grain, vignette, scanlines, glitch, chroma key, green screen, drop shadow."
license: MIT
---

# Layer Video Looks

## Overview

A look is the finish that makes separate shots read as one piece. On Layer it lives in the timeline:
every video and image item in `render_video_timeline` takes an `effects` list plus its own `blur`,
`brightness`, `saturation`, `hue` and `opacity` fields. No model runs to apply them, so a look is exact
to repeat; the render is still priced by `estimate_video_timeline_price`.

Assembly itself (sequence, transitions, overlays, audio) is `layer-video-timeline`. This skill covers
the finish on top of it. A look the timeline cannot make, such as relighting a shot or restyling its
content, is a generation: see `layer-video-fixes`.

If a sibling skill named here is missing from your available skills, ask the user to install it
(`npx skills add layerai/skills --skill <name>`); unattended, proceed from tool schemas and flag the
gap.

## Quick reference

| Look                      | Effects, in this order                                                                     |
| ------------------------- | ------------------------------------------------------------------------------------------ |
| Brand wash                | `duotone` with `darkColor` and `lightColor` in brand colours, or `tint` with `amount`      |
| Retro CRT                 | `scanlines`, then `noise`, then a light `chromaticAberration`                              |
| Film                      | `noise` (grain), `vignette`, `lightLeak`                                                   |
| Glitch hit on a cut       | `tvSignalOff` or a strong `chromaticAberration` on a short item at the cut                 |
| Green or blue screen      | `colorKey` first, with `keyColor` set to the screen                                        |
| Cut-out logo or character | `dropShadow` or `outline` on an image that has transparency                                |
| Dreamy highlights         | `glow` with a `threshold` so only the bright parts bloom                                   |
| Plain grade               | Item fields: `brightness`, `saturation`, `hue`; `contrast`, `exposure`, `vibrance` effects |

Every effect is `{type: "<name>", ...params}` with camelCase params, and every param has a default,
so `{type: "vignette"}` alone is valid. Colours are `{red, green, blue, alpha}` objects, 0 to 255.
`blur`, `brightness`, `saturation`, `hue` and `opacity` are item fields, not effects: `brightness` and
`saturation` are multipliers from 0 to 2 (1 unchanged), `hue` rotates -180 to 180 degrees.

`render_video_timeline` takes `{workspace_id, template, videos, images, audios}`. `template` is
`{width, height, fps, tracks: [{id, name, items, transitions}]}`; an item is `{id, type, start_frame,
duration_in_frames}` plus `file_id` or `slot`, and optionally `layout {left, top, width, height}`,
`effects`, `start_from_in_seconds` to trim a clip's head, and `volume`; a `solid` takes `color`
`{red, green, blue, alpha}`. The render returns a `generation_id` for `get_generation_run`.

## Order is the look

Effects apply in list order, each on the result of the one before. Order changes the picture:

- **Key first.** `colorKey` must see the screen's true colour. A `tint` or `exposure` ahead of it
  shifts the green and the key leaves patches behind.
- **Grade before texture.** Put `tint`, `duotone` and `contrast` ahead of `noise` and `scanlines`, so
  the grain sits on top of the colour instead of being recoloured by it.
- **Distortion last.** `wave`, `fisheye` and `zoomBlur` bend whatever reaches them; place them after
  the texture so the scanlines bend with the picture.

## One list, every clip

A look holds only if every clip that shares it carries the same `effects` list with the same params.
Build the list once and copy it onto each item. A second clip with a slightly different `tint`
`amount` reads as a mismatch, which is worse than no look at all.

Grade toward the shots, not away from them. Shots generated at different times differ in exposure and
saturation; level them first with the item's `brightness` and `saturation` fields, then apply the
shared list.

## Params are fixed for the whole item

The timeline has no keyframes. An effect's params hold for the item's whole span: a `shine` with
`progress: 0.5` is a sheen parked in the middle, not one that sweeps across, and `lightLeak`
`progress` is one phase of the leak, held.

Two ways to get movement:

- **Stepped items.** Split the span into several short items of the same file on one track, each with
  `start_from_in_seconds` continuing where the last stopped, and raise `progress` on each. Four to
  six steps read as motion on a short sheen.
- **Generate it.** A sweep that must be smooth is a video generation with the motion in the prompt
  (`layer-video`), not a timeline effect.

The same split confines an effect to a moment: cut the clip into before, hit and after items on one
track, and give only the few-frame hit item `tvSignalOff`. Do not stack the pieces on separate
tracks; items on one track must not overlap in time.

## Keying a screen

`colorKey` defaults to green (`{red: 0, green: 255, blue: 0}`); set `keyColor` to `{red: 0, green:
0, blue: 255}` for a blue screen. Tune in the order the schema gives: raise `similarity` when patches
of the screen remain, lower it when the subject's edges get eaten, and raise `spillSuppression` when a
coloured fringe stays on the subject. `smoothness` softens the keyed edge.

Tracks composite in reverse order, so Track 1 is on top. The keyed clip goes on a track above the
background it should reveal.

## Filling around a contained clip

A 16:9 clip in a 9:16 frame leaves bars. The schema's own fix: put a second copy of the clip on a
lower track with a full-frame `layout`, `is_auto_layout: false`, `content_fit: "cover"`, a high
`blur`, `volume: 0`, and its `brightness` lowered, then show the clip above it with
`content_fit: "contain"`. The frame fills with the clip's own colours instead of black.

## Worked example

"Give these four approved gameplay shots a retro arcade look, and put our presenter, shot on green
screen, over the last one."

1. All five clips came from earlier runs, so each has a `file_id`; nothing is uploaded.
2. Build one list for the gameplay clips:
   `[{type: "contrast", amount: 1.15}, {type: "scanlines", amount: 0.2, spacing: 4},
{type: "noise", amount: 0.12}, {type: "chromaticAberration", amount: 3}]`. Copy it unchanged onto
   all four gameplay items on Track 2.
3. The presenter goes on Track 1, spanning the last shot, with
   `[{type: "colorKey"}, {type: "scanlines", amount: 0.2, spacing: 4}, {type: "noise", amount: 0.12}]`:
   key first, then the same texture so the presenter sits in the same world.
4. A three-frame `tvSignalOff` item at the cut into the last shot, split from the clip as above.
5. `estimate_video_timeline_price` with the full input. Present the table; above 20 CUs wait for an
   explicit yes.
6. `render_video_timeline` with the same input. Poll `get_generation_run` with the returned
   `generation_id` at the interval it gives, never a fixed sleep.
7. Watch it end to end. If green patches remain on the presenter, raise `similarity` a step and
   re-render; if the hair edge is eaten, lower it.

## Common mistakes

- A different effect list, or different params, on clips meant to share a look.
- A `tint` or `exposure` ahead of `colorKey`, so the screen no longer matches the key colour.
- Expecting `shine` or `lightLeak` to move across a clip; params are fixed per item.
- Putting the keyed clip on a lower track than its background.
- `dropShadow` or `outline` on a clip with no transparency; the schema says they work best on cut-outs.
- Glitching a whole clip when the hit belongs on a few frames at the cut.
- Reaching for a generation to recolour footage the timeline can already grade.
- Uploading clips that Layer generated and that already carry a `file_id`.

© layerai · MIT · layerai/skills

Похожие скиллы

Все скиллы по теме «Дизайн» →
video-color-grading eachlabs Скилл video-color-grading отправляет видео на обработку в нейросеть each::sense. Помогает настроить цветокоррекцию, плёночные стили и баланс белого по текстовому описанию. CX Codex +1 751установок scenario-video-color-grade scenario-labs Скилл scenario-video-color-grade для Claude Code и Cursor подбирает цвета, исправляет свет и экспортирует таблицы LUT для видео и изображений. CX Codex +1 558установок ffmpeg-video-editor ffmpeg-video-editor contributors Скилл ffmpeg-video-editor для Claude Code помогает агенту монтировать видео и обрабатывать звук с помощью FFmpeg. Выполняет нарезку клипов, перекодирование и подготовку роликов к публикации. CX Codex +1 844установок scenario-video-editing scenario-labs Скилл scenario-video-editing для Claude Code, Codex и Cursor, который управляет обработкой готового видео через Scenario MCP. Применяет цветокоррекцию, вырезает хромакей, режет клипы и раскладывает их на кадры. CX Codex +1 904установок video-edit video-db Скилл video-edit для Claude Code монтирует видео на таймлайне и накладывает звук, титры и переходы. Срабатывает при сборке роликов, добавлении фоновой музыки или смене соотношения сторон. CX Codex +1 177установок precise-video-description calesthio Скилл precise-video-description для Claude Code переводит видеоряд в объективное описание сцен и планов. Готовит метаданные для датасетов, монтажных логов и передачи шотов в VFX. CX Codex +1 148установок

Из того же набора33

Весь набор →
layer-ua-creatives Скилл layer-ua-creatives для Claude Code организует пайплайн рекламных креативов для игр в Layer. Собирает матрицы гипотез из хуков, статичных артов, видеоанимаций и финальных карточек под разные форматы. CX Codex +1 1 100установок layer-store-assets Скилл layer-store-assets для Claude Code помогает готовить графику для страниц игр и приложений в магазинах. Включается для иконок, скриншотов, капсул Steam и видео-превью. CX Codex +1 1 100установок layer-motion-templates Скилл layer-motion-templates для Claude Code собирает видеошаблоны Layer со слотами под медиа для пакетного рендера вариантов. Включается при генерации рекламных роликов с разными хуками, озвучками или форматами. CX Codex +1 1 100установок layer-motion-graphics Скилл layer-motion-graphics для Claude Code помогает собирать моушн-графику в Layer: анимировать логотипы, титры и заставки. Текст он размещает на таймлайне, а движение задаёт переходами или отдельным видео. CX Codex +1 1 100установок layer-video-fixes Скилл layer-video-fixes для Claude Code исправляет отдельные дефекты видео на Layer без повторной генерации клипа. Он продлевает ролик, заменяет объект или персонажа, меняет свет и улучшает качество изображения. CX Codex +1 1 100установок layer-video-continuity Скилл layer-video-continuity для Claude Code помогает собирать многосерийные Layer-видео с общими персонажами, светом и декорациями. Передаёт контекст между сценами трейлеров и игровых катсцен. CX Codex +1 1 100установок layer-talking-characters Скилл layer-talking-characters для Claude Code создаёт говорящих персонажей и синхронизирует движение губ с аудио. Запускается для роликов с ведущим, реклам в стиле UGC, диалогов в трейлерах и замены реплики в готовом видео. CX Codex +1 1 100установок layer-video-direction Скилл layer-video-direction для Claude Code задаёт движение камеры, оптику, свет и тайминг при генерации отдельного шота в Layer. Запускается при постановке кадра или исправлении дрейфа камеры. CX Codex +1 1 100установок

Спонсоры проекта

Компании, которые помогают держать аналитику открытой