using-git-worktrees · julianobarbosa — скилл для Claude Code: worktree и tmux
Скилл using-git-worktrees создаёт изолированный git worktree, открывает его в окне tmux текущей сессии и отправляет туда задачу — для параллельной работы над фичами.
MIT 106 установок ★ 17 обновлён 2026-10-14
npx skills add julianobarbosa/claude-code-skills --skill using-git-worktrees -a claude-codeЧто делает using-git-worktrees
Скилл ведёт один поток: git worktree add в .claude/worktrees/{name}, новое окно в текущей сессии tmux с именем {session}-{name}, переход в каталог и отправка команды через send-keys. Намерение задаёт объём работы: просьба создать worktree даёт первые три шага, просьба создать и запустить — все четыре. Уборка после мержа снимает окно, worktree и ветку, потом делает git worktree prune.
Перед созданием скилл проверяет, что .claude/worktrees/ есть в .gitignore, и дописывает строку, если её нет. Без этого родительский репозиторий видит файлы worktree как неотслеживаемые. Ещё две вещи ломаются на ровном месте: параллельный git status в разных worktree даёт index.lock, а длинные имена окон tmux упираются в лимит длины пути.
Внутри есть scripts/setup-worktree.sh для автоматизации, references/tmux-integration.md по настройке tmux и references/bmad-orchestration.md с разбором зависимостей и мержем для BMAD-проектов. Запуск claude --dangerously-skip-permissions скилл советует только по прямой просьбе. Если tmux не запущен, шаги с окнами пропускаются: останется созданный worktree и его путь.
Какие задачи решает
- Поднять отдельный worktree под фичу и не трогать основную копию репозитория
- Открыть ветку в новом окне tmux и сразу отправить туда задачу
- Развести несколько экземпляров Claude по окнам одной сессии
- Убрать worktree, окно tmux и слитую ветку после мержа
- Проверить, что
.claude/worktrees/не попадёт в индекс git
Примеры запросов агенту
- Создай worktree для фичи
story-1-3и запусти в нёмclaudeс задачей - Сделай worktree от
mainи открой его в новом окне tmux этой сессии - Убери worktree
story-1-3после мержа вместе с окном tmux
Как установить using-git-worktrees
1Через Skills CLI (Vercel)
npx skills add julianobarbosa/claude-code-skills --skill using-git-worktrees -a claude-code2Вручную: положить файлы
~/.claude/skills/using-git-worktrees/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/using-git-worktrees/
1Через Skills CLI (Vercel)
npx skills add julianobarbosa/claude-code-skills --skill using-git-worktrees -a codex2Вручную: положить файлы
.agents/skills/using-git-worktrees/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add julianobarbosa/claude-code-skills --skill using-git-worktrees -a cursor2Вручную: положить файлы
.cursor/skills/using-git-worktrees/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install julianobarbosa/claude-code-skills skills/using-git-worktrees2Вручную: положить файлы
.github/skills/using-git-worktrees/SKILL.md1Через Skills CLI (Vercel)
npx skills add julianobarbosa/claude-code-skills --skill using-git-worktrees -a gemini-cli2Командой платформы
gemini skills install https://github.com/julianobarbosa/claude-code-skills --path skills/using-git-worktreesВручную: положить файлы
.devin/skills/using-git-worktrees/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Через Skills CLI (Vercel)
npx skills add julianobarbosa/claude-code-skills --skill using-git-worktrees -a opencodeClaude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы об using-git-worktrees
Как установить using-git-worktrees в Claude Code?
Выполните npx skills add julianobarbosa/claude-code-skills --skill using-git-worktrees -a claude-code. Файл скилла окажется в ~/.claude/skills/using-git-worktrees/SKILL.md.
Что делает using-git-worktrees?
Создаёт git worktree в .claude/worktrees/, заводит окно tmux в текущей сессии и отправляет в него команду. Умеет также снимать worktree, окно и ветку после мержа.
Что нужно, чтобы скилл работал?
git и tmux. Без tmux скилл создаст worktree и вернёт путь, а шаги с окном и отправкой команды пропустит.
Исходный текст
SKILL.md · MIT
---
name: using-git-worktrees
description: Git worktree management with tmux integration and task dispatch. Use when creating isolated dev environments, launching parallel feature work, running multiple Claude instances, managing worktrees, dispatching tasks to worktree terminals, or cleaning up after merge. Covers worktree creation in .claude/worktrees/, tmux window management in the current session, and command dispatch. Also use when someone says "create a worktree", "launch in a worktree", "worktree for story X", or "parallel development".
---
# Git Worktrees with tmux Integration
Create isolated workspaces, open them in tmux windows within your current session, and dispatch tasks — all in one flow.
## Core Flow
```
1. Create worktree → git worktree add .claude/worktrees/{name} -b {branch}
2. Create tmux window → new window in CURRENT session named {session}-{name}
3. cd into worktree → send-keys to the new window
4. Dispatch task → send-keys with the command to execute
```
## Workflow Routing
| Intent | Action |
|--------|--------|
| "create worktree for X" | Create → steps 1-3 only |
| "create worktree and run Y" | Create + Dispatch → steps 1-4 |
| "clean up worktree X" | Cleanup → remove worktree + tmux window + optionally delete branch |
| "list worktrees" | Show `git worktree list` |
| "analyze for parallelization" | Read `references/bmad-orchestration.md` for BMAD-specific dependency analysis |
| "merge worktree branches" | Read `references/bmad-orchestration.md` for merge workflow |
## Step 1: Create Worktree
### Safety Check
Before creating, verify `.claude/worktrees/` is git-ignored:
```bash
# Check if ignored (test with a hypothetical file)
git check-ignore .claude/worktrees/test 2>/dev/null
```
If NOT ignored, add to `.gitignore` immediately:
```bash
echo ".claude/worktrees/" >> .gitignore
# Stage and commit the gitignore change
```
### Create
```bash
REPO_ROOT=$(git rev-parse --show-toplevel)
WORKTREE_NAME="the-feature-name"
BRANCH_NAME="feature/the-feature-name" # or bmad/story-1-3 etc.
BASE_BRANCH="main" # or current branch
mkdir -p "$REPO_ROOT/.claude/worktrees"
git worktree add "$REPO_ROOT/.claude/worktrees/$WORKTREE_NAME" -b "$BRANCH_NAME" "$BASE_BRANCH"
```
### Verify
```bash
git worktree list
```
## Step 2: Create tmux Window
Create a new window in the **current tmux session** (not a new session). The window name follows the pattern `{current-session-name}-{worktree-name}` so it's easy to identify.
```bash
# Get current tmux session name
SESSION=$(tmux display-message -p '#S')
WINDOW_NAME="${SESSION}-${WORKTREE_NAME}"
WORKTREE_PATH="$REPO_ROOT/.claude/worktrees/$WORKTREE_NAME"
# Create window in current session, starting in worktree directory
tmux new-window -t "$SESSION" -n "$WINDOW_NAME" -c "$WORKTREE_PATH"
```
## Step 3: Ensure Working Directory
The `-c` flag in step 2 already sets the initial directory, but if you need to explicitly cd (e.g., shell profile overrides it):
```bash
tmux send-keys -t "${SESSION}:${WINDOW_NAME}" "cd '$WORKTREE_PATH'" Enter
```
## Step 4: Dispatch Task (Optional)
Send a command to the new tmux window:
```bash
# Example: launch Claude Code with a task
tmux send-keys -t "${SESSION}:${WINDOW_NAME}" "claude 'your task here'" Enter
# Example: run a BMAD skill
tmux send-keys -t "${SESSION}:${WINDOW_NAME}" "claude '/bmad-create-story story 1-3'" Enter
# Example: run any shell command
tmux send-keys -t "${SESSION}:${WINDOW_NAME}" "make test" Enter
```
For unattended execution (no permission prompts):
```bash
tmux send-keys -t "${SESSION}:${WINDOW_NAME}" "claude --dangerously-skip-permissions 'your task'" Enter
```
**Important:** Only use `--dangerously-skip-permissions` if the user explicitly requests it.
## Cleanup Workflow
After work is complete and merged:
```bash
WORKTREE_NAME="the-feature-name"
REPO_ROOT=$(git rev-parse --show-toplevel)
SESSION=$(tmux display-message -p '#S')
# 1. Kill the tmux window
tmux kill-window -t "${SESSION}:${SESSION}-${WORKTREE_NAME}" 2>/dev/null
# 2. Remove the git worktree
git worktree remove "$REPO_ROOT/.claude/worktrees/$WORKTREE_NAME"
# 3. Optionally delete the branch (only if merged)
git branch -d "$BRANCH_NAME" 2>/dev/null
# 4. Prune stale worktree references
git worktree prune
```
## Quick Reference
| Situation | Action |
|-----------|--------|
| `.claude/worktrees/` exists | Use it (verify ignored) |
| Not in `.gitignore` | Add `.claude/worktrees/` and commit |
| Not in tmux | Skip tmux steps, just create worktree and report path |
| Branch already exists | Use `git worktree add <path> <existing-branch>` (no `-b`) |
| Worktree path exists | Report error, ask user to remove or pick different name |
## Naming Conventions
| Element | Pattern | Example |
|---------|---------|---------|
| Worktree directory | `.claude/worktrees/{name}` | `.claude/worktrees/story-1-3` |
| Branch | `{convention}/{name}` | `bmad/story-1-3-deploy-nat-gateway` |
| tmux window | `{session}-{name}` | `myproject-golden-image-story-1-3` |
The branch naming convention depends on the project. Check CLAUDE.md for project-specific patterns (e.g., `bmad/story-{id}` for BMAD projects).
## Troubleshooting
**Branch already checked out:**
```bash
# Another worktree has this branch — remove it first or use a different name
git worktree list # find which worktree has the branch
```
**tmux window name conflict:**
```bash
# Rename or kill the conflicting window
tmux kill-window -t "session:conflicting-name" 2>/dev/null
```
**Worktree not in .gitignore after adding:**
```bash
# .gitignore uses directory patterns — ensure trailing slash
# Check with: git check-ignore .claude/worktrees/testfile
```
## References
- [WORKFLOW.md](WORKFLOW.md) — Detailed step-by-step workflow with edge cases
- [references/bmad-orchestration.md](references/bmad-orchestration.md) — BMAD sprint parallelization, dependency analysis, and merge workflows
- [references/tmux-integration.md](references/tmux-integration.md) — Advanced tmux configuration for worktrees
- [scripts/setup-worktree.sh](scripts/setup-worktree.sh) — Shell script for automated worktree setup
---
## Gotchas
- **`.claude/worktrees/` conflicts with `.gitignore` defaults** — must explicitly ignore it or the parent repo sees worktree files as untracked.
- **tmux session names with worktree paths hit filename length limits** — use short branch-based names or the socket path errors.
- **Concurrent `git status` across worktrees can fail with index.lock errors** — git locks the index per-repo, not per-worktree.
- **BMAD-specific parallel work assumes disjoint files**: overlapping edits across stories cause merge headaches at integration.
- **Shell prompts that read git branch via the worktree path can be slow** — disable expensive prompt parts in worktrees.
© julianobarbosa · MIT · julianobarbosa/claude-code-skills
Похожие скиллы
Все скиллы по теме «Git и GitHub» →Сначала — using-git-worktrees от других авторов.