inspect-in-devtools — скилл для Claude Code: отладка и установка
Скилл inspect-in-devtools для Claude Code связывает агента с интерфейсом Chrome DevTools. Он показывает элементы и запросы, читает текущий выбор и обрабатывает ветки комментариев.
Apache-2.0 119 установок ★ 58 707 обновлён 2026-10-23
npx skills add ChromeDevTools/chrome-devtools-mcp --skill inspect-in-devtools -a claude-codeЧто делает inspect-in-devtools
inspect-in-devtools открывает DevTools для нужной страницы, показывает панели, элементы DOM или сетевые запросы и считывает выбранный пользователем элемент либо запрос. Для работы с элементом доступны снимок страницы и инструменты чтения CSS, скриншота и выполнения скрипта.
Скилл также получает комментарии из DevTools, отвечает на них и закрывает ветки. В режиме ожидания он проверяет комментарии с паузой в 10 секунд и прекращает опрос после 12 пустых проверок подряд. Нужен Chrome M159 или новее в режиме с интерфейсом, флаг --devtools-comments в конфигурации MCP-сервера и pageId, полученный через list_pages или new_page. Без флага инструменты комментариев и показа в DevTools недоступны.
Какие задачи решает
- показать выбранный элемент DOM в панели Elements
- открыть нужный сетевой запрос в панели Network
- собрать сведения о выбранном запросе
- ответить на комментарии DevTools и закрыть ветки
Примеры запросов агенту
- Покажи в DevTools элемент, который я выбрал на странице.
- Открой запрос, связанный с этой ошибкой, в панели Network.
- Проверь комментарии в DevTools, внеси запрошенные исправления и закрой ветки.
Как установить inspect-in-devtools
1Через Skills CLI (Vercel)
npx skills add ChromeDevTools/chrome-devtools-mcp --skill inspect-in-devtools -a claude-code2Вручную: положить файлы
~/.claude/skills/inspect-in-devtools/SKILL.mdПапка скилла целиком; для одного проекта — .claude/skills/inspect-in-devtools/
1Через Skills CLI (Vercel)
npx skills add ChromeDevTools/chrome-devtools-mcp --skill inspect-in-devtools -a codex2Вручную: положить файлы
.agents/skills/inspect-in-devtools/SKILL.mdДля всех проектов — ~/.agents/skills/
1Через Skills CLI (Vercel)
npx skills add ChromeDevTools/chrome-devtools-mcp --skill inspect-in-devtools -a cursor2Вручную: положить файлы
.cursor/skills/inspect-in-devtools/SKILL.mdCursor читает и .agents/skills/, и .claude/skills/
1GitHub CLI
gh skill install ChromeDevTools/chrome-devtools-mcp skills/inspect-in-devtools2Вручную: положить файлы
.github/skills/inspect-in-devtools/SKILL.md1Через Skills CLI (Vercel)
npx skills add ChromeDevTools/chrome-devtools-mcp --skill inspect-in-devtools -a gemini-cli2Командой платформы
gemini skills install https://github.com/ChromeDevTools/chrome-devtools-mcp --path skills/inspect-in-devtoolsВручную: положить файлы
.devin/skills/inspect-in-devtools/SKILL.mdСтарый путь .windsurf/skills/ тоже читается
Через Skills CLI (Vercel)
npx skills add ChromeDevTools/chrome-devtools-mcp --skill inspect-in-devtools -a opencodeClaude.ai
Упакуйте папку в zip и загрузите в Settings → Capabilities → Skills
По шагам, с командами для каждой платформы: Как установить скилл в Claude Code: пять способов
Вопросы об inspect-in-devtools
Как установить inspect-in-devtools в Claude Code?
Выполни npx skills add ChromeDevTools/chrome-devtools-mcp --skill inspect-in-devtools -a claude-code. Файл скилла находится по пути ~/.claude/skills/inspect-in-devtools/SKILL.md.
Что делает inspect-in-devtools?
Скилл связывает агента с интерфейсом Chrome DevTools: показывает панели, элементы DOM и сетевые запросы, читает текущий выбор и обрабатывает комментарии.
Что нужно для работы inspect-in-devtools?
Нужен Chrome M159 или новее, запущенный не в режиме --headless, флаг --devtools-comments в конфигурации MCP-сервера и pageId из list_pages или new_page.
Исходный текст
SKILL.md · Apache-2.0
--- name: inspect-in-devtools description: Use this skill to connect to the Chrome DevTools UI for interactive debugging, UI/UX review, Q&A, showing elements/network requests/panels to the user, inspecting the user's current DevTools selection, and addressing or polling for DevTools UI comment threads. --- # Debug, Review, and Q&A in DevTools Use this skill to: 1. **Show a target to the user**: Open DevTools and reveal a panel, a DOM element, or a network request. 2. **Inspect the user's selection**: Read the element or network request that the user selected in DevTools. 3. **Address DevTools comments**: Fetch comment threads, answer questions or apply fixes, and resolve the threads. ## Prerequisites - **Chrome version**: Chrome M159 or later. - **Required flag**: `--devtools-comments` in the MCP server config. Without it, `open_devtools`, `reveal_in_devtools`, `get_devtools_comments`, and `resolve_devtools_comment` are not available. - **Headed browser**: Chrome must not run in `--headless` mode. - **Page targeting**: All tools require a `pageId` from `list_pages` or `new_page`. ## Workflows ### 1. Open DevTools Call `open_devtools` with `pageId`. Do this before you call `reveal_in_devtools`, `get_devtools_comments`, or `resolve_devtools_comment`. ### 2. Reveal a panel, element, or network request Call `reveal_in_devtools` with `pageId` and these optional parameters: - `panelName`: `"elements"`, `"network"`, `"sources"`, or `"console"`. Pass it alone to switch panels. - `uid`: Element `uid` from `take_snapshot`. Reveals the element in the Elements panel. - `reqid`: Request `reqid` from `list_network_requests`. Reveals the request in the Network panel. `uid` and `reqid` are mutually exclusive. ### 3. Inspect the user's selection - **DOM element**: Call `take_snapshot`. The snapshot marks the element selected in the Elements panel. Pass its `uid` to `get_css_styles`, `take_screenshot`, or `evaluate_script`. - **Network request**: Call `get_network_request` and omit `reqid`. It returns the request selected in the Network panel. ### 4. Handle comment threads Select the mode from the user's request. #### Mode A: One-shot (comments already exist) Use this mode when the user says the comments are already in DevTools, or asks you not to poll. 1. Call `get_devtools_comments` once. 2. Process and resolve each returned thread. 3. Summarize your changes and answers in chat, then end your turn. Do **not** poll. #### Mode B: Watch (wait for user feedback) Use this mode when the user asks you to wait while they debug, review, or add comments. 1. Call `get_devtools_comments` immediately. 2. While the result is `"No open DevTools comments found."`, wait 10 seconds, then call it again. Call it immediately if a `"DevTools comment threads updated"` notification arrives. 3. Stop after 12 consecutive empty polls (about 2 minutes) or when the user asks you to stop. 4. When threads appear, process and resolve them. Then reset the empty-poll counter and continue polling. Rules for polling: - **Use a background sub-agent** when sub-agent tools are available, so the main thread stays responsive. The sub-agent returns the threads to the main agent, or resolves them itself if it has workspace and MCP tools. - **Poll inline** only when sub-agent tools are unavailable. Do not end your turn early. - **Never call `get_devtools_comments` back-to-back** without the 10-second delay. #### Process and resolve a thread For each `### Thread: <id>`: 1. **Inspect the anchored target**: - `Related element uid`: Use `get_css_styles`, `take_snapshot`, or `take_screenshot` with the `uid`. - `Related network reqid`: Use `get_network_request` with the `reqid`. - Optionally call `reveal_in_devtools` to show the target to the user. 2. **Address the comment**: - For a code or styling request, apply the fix in the workspace. Reload and verify the page if needed. - For a question or root-cause investigation, collect diagnostic data. Do not make unnecessary code edits. 3. **Resolve**: Call `resolve_devtools_comment` with `pageId`, `threadId`, and `replyText`: - For a question or root cause, write a detailed answer. - For a straightforward fix, write 1–2 sentences that state the change and the file.
© ChromeDevTools · Apache-2.0 · ChromeDevTools/chrome-devtools-mcp